u-boot/arch/arm/dts/meson-sm1-sei610.dts
Christian Hewitt da77a787ff ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1
This imports the changes and the new Odroid-C4 board from the Linux
commit b3a9e3b9622a ("Linux 5.8-rc1").

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-07-08 10:52:45 +02:00

616 lines
12 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 BayLibre SAS. All rights reserved.
*/
/dts-v1/;
#include "meson-sm1.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
compatible = "seirobotics,sei610", "amlogic,sm1";
model = "SEI Robotics SEI610";
aliases {
serial0 = &uart_AO;
ethernet0 = &ethmac;
};
mono_dac: audio-codec-0 {
compatible = "maxim,max98357a";
#sound-dai-cells = <0>;
sound-name-prefix = "U16";
sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
};
dmics: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "dmic-codec";
num-channels = <2>;
wakeup-delay-ms = <50>;
status = "okay";
sound-name-prefix = "MIC";
};
chosen {
stdout-path = "serial0:115200n8";
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
};
gpio-keys {
compatible = "gpio-keys";
key1 {
label = "A";
linux,code = <BTN_0>;
gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
};
key2 {
label = "B";
linux,code = <BTN_1>;
gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
};
key3 {
label = "C";
linux,code = <BTN_2>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
};
mic_mute {
label = "MicMute";
linux,code = <SW_MUTE_DEVICE>;
linux,input-type = <EV_SW>;
gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
};
power_key {
label = "PowerKey";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_tx_tmds_out>;
};
};
};
leds {
compatible = "gpio-leds";
led-bluetooth {
label = "sei610:blue:bt";
gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
default-state = "off";
};
};
pwmleds {
compatible = "pwm-leds";
power {
label = "sei610:red:power";
pwms = <&pwm_AO_ab 0 30518 0>;
max-brightness = <255>;
linux,default-trigger = "default-on";
active-low;
};
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
ao_5v: regulator-ao_5v {
compatible = "regulator-fixed";
regulator-name = "AO_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_in>;
regulator-always-on;
};
dc_in: regulator-dc_in {
compatible = "regulator-fixed";
regulator-name = "DC_IN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
emmc_1v8: regulator-emmc_1v8 {
compatible = "regulator-fixed";
regulator-name = "EMMC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_in>;
regulator-always-on;
};
/* Used by Tuner, RGB Led & IR Emitter LED array */
vddao_3v3_t: regulator-vddao_3v3_t {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3_T";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
enable-active-low;
regulator-always-on;
};
vddcpu: regulator-vddcpu {
/*
* SY8120B1ABC DC/DC Regulator.
*/
compatible = "pwm-regulator";
regulator-name = "VDDCPU";
regulator-min-microvolt = <690000>;
regulator-max-microvolt = <1050000>;
vin-supply = <&dc_in>;
pwms = <&pwm_AO_cd 1 1500 0>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
regulator-always-on;
};
vddio_ao1v8: regulator-vddio_ao1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
reserved-memory {
/* TEE Reserved Memory */
bl32_reserved: bl32@5000000 {
reg = <0x0 0x05300000 0x0 0x2000000>;
no-map;
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
sound {
compatible = "amlogic,axg-sound-card";
model = "SM1-SEI610";
audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
<&tdmin_a>, <&tdmin_b>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
"TDMOUT_A IN 1", "FRDDR_B OUT 0",
"TDMOUT_A IN 2", "FRDDR_C OUT 0",
"TDM_A Playback", "TDMOUT_A OUT",
"TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT",
"TODDR_A IN 4", "PDM Capture",
"TODDR_B IN 4", "PDM Capture",
"TODDR_C IN 4", "PDM Capture",
"TDMIN_A IN 0", "TDM_A Capture",
"TDMIN_A IN 3", "TDM_A Loopback",
"TDMIN_B IN 0", "TDM_A Capture",
"TDMIN_B IN 3", "TDM_A Loopback",
"TDMIN_A IN 1", "TDM_B Capture",
"TDMIN_A IN 4", "TDM_B Loopback",
"TDMIN_B IN 1", "TDM_B Capture",
"TDMIN_B IN 4", "TDM_B Loopback",
"TODDR_A IN 0", "TDMIN_A OUT",
"TODDR_B IN 0", "TDMIN_A OUT",
"TODDR_C IN 0", "TDMIN_A OUT",
"TODDR_A IN 1", "TDMIN_B OUT",
"TODDR_B IN 1", "TDMIN_B OUT",
"TODDR_C IN 1", "TDMIN_B OUT";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
assigned-clock-parents = <0>, <0>, <0>;
assigned-clock-rates = <294912000>,
<270950400>,
<393216000>;
status = "okay";
dai-link-0 {
sound-dai = <&frddr_a>;
};
dai-link-1 {
sound-dai = <&frddr_b>;
};
dai-link-2 {
sound-dai = <&frddr_c>;
};
dai-link-3 {
sound-dai = <&toddr_a>;
};
dai-link-4 {
sound-dai = <&toddr_b>;
};
dai-link-5 {
sound-dai = <&toddr_c>;
};
/* internal speaker interface */
dai-link-6 {
sound-dai = <&tdmif_a>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
mclk-fs = <256>;
codec-0 {
sound-dai = <&mono_dac>;
};
codec-1 {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
};
};
/* 8ch hdmi interface */
dai-link-7 {
sound-dai = <&tdmif_b>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
dai-tdm-slot-tx-mask-1 = <1 1>;
dai-tdm-slot-tx-mask-2 = <1 1>;
dai-tdm-slot-tx-mask-3 = <1 1>;
mclk-fs = <256>;
codec {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
};
};
/* internal digital mics */
dai-link-8 {
sound-dai = <&pdm>;
codec {
sound-dai = <&dmics>;
};
};
/* hdmi glue */
dai-link-9 {
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
codec {
sound-dai = <&hdmi_tx>;
};
};
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
};
&arb {
status = "okay";
};
&cec_AO {
pinctrl-0 = <&cec_ao_a_h_pins>;
pinctrl-names = "default";
status = "disabled";
hdmi-phandle = <&hdmi_tx>;
};
&cecb_AO {
pinctrl-0 = <&cec_ao_b_h_pins>;
pinctrl-names = "default";
status = "okay";
hdmi-phandle = <&hdmi_tx>;
};
&clkc_audio {
status = "okay";
};
&cpu0 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu1 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU1_CLK>;
clock-latency = <50000>;
};
&cpu2 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU2_CLK>;
clock-latency = <50000>;
};
&cpu3 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU3_CLK>;
clock-latency = <50000>;
};
&ethmac {
status = "okay";
phy-handle = <&internal_ephy>;
phy-mode = "rmii";
};
&frddr_a {
status = "okay";
};
&frddr_b {
status = "okay";
};
&frddr_c {
status = "okay";
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
pinctrl-names = "default";
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
&i2c3 {
status = "okay";
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&pdm {
pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm_AO_ab {
status = "okay";
pinctrl-0 = <&pwm_ao_a_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin0";
};
&pwm_AO_cd {
pinctrl-0 = <&pwm_ao_d_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin1";
status = "okay";
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin0";
};
&saradc {
status = "okay";
vref-supply = <&vddio_ao1v8>;
};
/* SDIO */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr50;
max-frequency = <100000000>;
non-removable;
disable-wp;
/* WiFi firmware requires power to be kept while in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_ao1v8>;
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_c_pins>;
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddao_3v3>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&emmc_1v8>;
};
&tdmif_a {
pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
pinctrl-names = "default";
status = "okay";
assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
<&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
<&clkc_audio AUD_CLKID_MST_A_LRCLK>;
assigned-clock-rates = <0>, <0>;
};
&tdmif_b {
status = "okay";
};
&tdmin_a {
status = "okay";
};
&tdmin_b {
status = "okay";
};
&tdmout_a {
status = "okay";
};
&tdmout_b {
status = "okay";
};
&toddr_a {
status = "okay";
};
&toddr_b {
status = "okay";
};
&toddr_c {
status = "okay";
};
&tohdmitx {
status = "okay";
};
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm43438-bt";
interrupt-parent = <&gpio_intc>;
interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wakeup";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
vbat-supply = <&vddao_3v3>;
vddio-supply = <&vddio_ao1v8>;
};
};
/* Exposed via the on-board USB to Serial FT232RL IC */
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&usb {
status = "okay";
dr_mode = "otg";
};