u-boot/drivers/usb/host
Nikhil Badola 896720ceb2 fsl/usb: Increase TXFIFOTHRESH value for usb write in T4 Rev 2.0
Increase TXFIFOTHRES field value in TXFILLTUNING register of usb for T4 Rev 2.0.
This decreases data burst rate with which data packets are posted from the TX
latency FIFO to compensate for latencies in DDR pipeline during DMA.
This avoids Tx buffer underruns and leads to successful usb writes

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:49 -07:00
..
ehci-armada100.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-atmel.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-exynos.c usb: exynos5: arndale: Add network support 2014-01-13 12:23:28 +01:00
ehci-faraday.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-fsl.c fsl/usb: Increase TXFIFOTHRESH value for usb write in T4 Rev 2.0 2014-04-22 17:58:49 -07:00
ehci-hcd.c usb: ehci: fully align interrupt QHs/QTDs 2014-03-10 18:53:36 +01:00
ehci-marvell.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mpc512x.c powerpc/usb:Differentiate USB controller base address 2013-10-24 09:35:09 -07:00
ehci-mx5.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mx6.c usb: ehci-mx6: add support for otg port 2013-10-20 23:46:33 +02:00
ehci-mxc.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mxs.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-omap.c usb: ehci-omap: Reset the USB Host OMAP module 2013-12-06 07:02:32 -05:00
ehci-pci.c usb: ehci-pci: Clarify and cleanup the EHCI controller detection 2013-12-18 19:53:19 +01:00
ehci-ppc4xx.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-spear.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-tegra.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-vct.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci.h usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
isp116x-hcd.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
isp116x.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Makefile ARM: USB: Remove the IXP EHCI driver 2014-02-06 02:51:52 +01:00
ohci-at91.c arm: atmel: get rid of too many ifdeffery 2013-11-04 20:32:37 +01:00
ohci-da8xx.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ohci-hcd.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
ohci-s3c24xx.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
ohci-s3c24xx.h dm: Move s3c24xx USB driver to a proper place 2012-10-18 06:54:18 +02:00
ohci.h usb: new board-specific USB init interface 2013-10-20 23:42:40 +02:00
r8a66597-hcd.c usb: create common header virtual root hub descriptors 2014-03-10 18:53:36 +01:00
r8a66597.h usb: r8a66597: Fix argument mistake of inl 2011-08-08 21:40:40 +02:00
sl811-hcd.c usb: add enum usb_init_type parameter to usb_lowlevel_init 2013-10-20 23:45:26 +02:00
sl811.h drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
utmi-armada100.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
xhci-exynos5.c exynos: usb: Switch USB VBUS GPIOs to be device tree configured 2013-10-20 23:42:38 +02:00
xhci-mem.c USB: xHCI: Add stack support for xHCI 2013-10-20 23:42:38 +02:00
xhci-omap.c usb: rename board_usb_init_type to usb_init_type 2013-10-22 17:33:09 -04:00
xhci-ring.c USB: xHCI: Add stack support for xHCI 2013-10-20 23:42:38 +02:00
xhci.c usb: add enum usb_init_type parameter to usb_lowlevel_init 2013-10-20 23:45:26 +02:00
xhci.h USB: xHCI: Add stack support for xHCI 2013-10-20 23:42:38 +02:00