u-boot/board/freescale/common/cds_via.c
Jon Loeliger 25eedb2c19 FSL: Clean up board/freescale/common/Makefile
Each file that can be built here now follows some
CONFIG_ option so that they are appropriately built
or not, as needed.  And CONFIG_ defines were added
to various board config files to make sure that happens.

The other board/freescale/*/Makefiles no longer need
to reach up and over into ../common to build their
individually needed files any more.

Boards that are CDS specific were renamed with cds_ prefix.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-26 11:43:04 -05:00

109 lines
3.8 KiB
C

/*
* Copyright 2006 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <pci.h>
/* Config the VIA chip */
void mpc85xx_config_via(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pci_dev_t bridge;
unsigned int cmdstat;
/* Enable USB and IDE functions */
pci_hose_write_config_byte(hose, dev, 0x48, 0x08);
pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
cmdstat |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY| PCI_COMMAND_MASTER;
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
/*
* Force the backplane P2P bridge to have a window
* open from 0x00000000-0x00001fff in PCI I/O space.
* This allows legacy I/O (i8259, etc) on the VIA
* southbridge to be accessed.
*/
bridge = PCI_BDF(0,BRIDGE_ID,0);
pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0);
pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0);
pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10);
pci_hose_write_config_word(hose, bridge, PCI_IO_LIMIT_UPPER16, 0);
}
/* Function 1, IDE */
void mpc85xx_config_via_usbide(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pciauto_config_device(hose, dev);
/*
* Since the P2P window was forced to cover the fixed
* legacy I/O addresses, it is necessary to manually
* place the base addresses for the IDE and USB functions
* within this window.
*/
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1ff8);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1ff4);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1fe8);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_3, 0x1fe4);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fd0);
}
/* Function 2, USB ports 0-1 */
void mpc85xx_config_via_usb(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pciauto_config_device(hose, dev);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fa0);
}
/* Function 3, USB ports 2-3 */
void mpc85xx_config_via_usb2(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pciauto_config_device(hose, dev);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1f80);
}
/* Function 5, Power Management */
void mpc85xx_config_via_power(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pciauto_config_device(hose, dev);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1e00);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1dfc);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1df8);
}
/* Function 6, AC97 Interface */
void mpc85xx_config_via_ac97(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pciauto_config_device(hose, dev);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1c00);
}