Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 10:48:51 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/hisilicon/hikey960/README
Manivannan Sadhasivam c62c7ef779 board: hisilicon: Add support for Hikey960 board 
This commit adds board support for Hikey960 board from Hisilicon. This
board is one of the Consumer Edition boards of the 96Boards family
powered by Kirin960 SoC.

More information about this board can be found in 96Boards website:
https://www.96boards.org/product/hikey960/

The initial supported/tested devices include:
 - Debug serial
 - SD

With these support, it's good enough for loading Linux Kernel from SD.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11 16:43:41 -04:00

247 lines
8.9 KiB
Text
Raw Blame History

Introduction
============
HiKey960 is one of the 96Boards Consumer Edition board from HiSilicon.
The board/SoC has: -
* HiSilicon Kirin960 (HI3660) SoC with 4xCortex-A73 and 4xCortex-A53
* ARM Mali G71 MP8 GPU
* 3GB LPDDR4 SDRAM
* 32GB UFS Flash Storage
* microSD
* 802.11a/b/g/n WiFi, Bluetooth
More information about this board can be found in 96Boards website:
https://www.96boards.org/product/hikey960/
Currently the u-boot port supports: -
* SD card
Compile from source
===================
First get all the sources
> mkdir -p ~/hikey960/src ~/hikey960/bin
> cd ~/hikey960/src
> git clone https://github.com/ARM-software/arm-trusted-firmware
> git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
> git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/config
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hisi-sec_usb_xloader.img
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hisi-sec_uce_boot.img
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/sec_xloader.img
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/recovery.bin
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hikey_idt
Get the SCP_BL2 lpm3.img binary. It is shipped as part of the UEFI source.
The latest version can be obtained from the OpenPlatformPkg repo.
> cp OpenPlatformPkg/Platforms/Hisilicon/HiKey960/Binary/lpm3.img ~/hikey960/bin/
Compile U-Boot
==============
> cd ~/hikey960/src/u-boot
> make CROSS_COMPILE=aarch64-linux-gnu- hikey960_defconfig
> make CROSS_COMPILE=aarch64-linux-gnu-
> cp u-boot.bin ~/hikey960/bin/
Compile ARM Trusted Firmware (ATF)
==================================
> cd ~/hikey960/src/arm-trusted-firmware
> make CROSS_COMPILE=aarch64-linux-gnu- all fip \
SCP_BL2=~/hikey960/bin/lpm3.img \
BL33=~/hikey960/bin/u-boot.bin DEBUG=1 PLAT=hikey960
Copy the resulting FIP binary
> cp build/hikey960/debug/fip.bin ~/hikey960/bin
Compile l-loader
================
> cd ~/hikey960/src/l-loader
> ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl1.bin
> ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl2.bin
> ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/fip.bin
> ln -sf ~/hikey960/bin/u-boot.bin
> make hikey960 PTABLE_LST=linux-32g NS_BL1U=u-boot.bin
Copy the resulting binaries
> cp *.img ~/hikey960/bin
> cp l-loader.bin ~/hikey960/bin
These instructions are adapted from
https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey960.rst
Setup Console
=============
Install ser2net. Use telnet as the console since UEFI in recovery mode
output window fails to display in minicom.
> sudo apt-get install ser2net
Configure ser2net
> sudo vi /etc/ser2net.conf
Append one line for serial-over-USB in #ser2net.conf
> 2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner
Start ser2net
> sudo killall ser2net
> sudo ser2net -u
Open the console.
> telnet localhost 2004
And you could open the console remotely, too.
Flashing
========
1. Boot Hikey960 into recovery mode as per the below document:
https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey960/installation/board-recovery.md
Once Hikey960 is in recovery mode, flash the recovery binary:
> cd ~/hikey960/src
> chmod +x ./hikey_idt
> sudo ./hikey_idt -c config -p /dev/ttyUSB1
Now move to the Hikey960 console and press `f` during UEFI boot. This
will allow the board to boot into fastboot mode. Once the board is in
fastboot mode, you should see the ID of the HiKey960 board using the
following command
> sudo fastboot devices
1ED3822A018E3372 fastboot
3. Flash the images
Now, the images can be flashed using fastboot:
> sudo fastboot flash ptable ~/hikey960/bin/prm_ptable.img
> sudo fastboot flash xloader ~/hikey960/bin/sec_xloader.img
> sudo fastboot flash fastboot ~/hikey960/bin/l-loader.bin
> sudo fastboot flash fip ~/hikey960/bin/fip.bin
4. Set the "Boot Mode" switch to OFF position for normal boot mode.
Then power on HiKey960
Observe the console traces using UART6 on the Low Speed Expansion header:
NOTICE: BL2: v2.1(debug):v2.1-531-g3ee48f40
NOTICE: BL2: Built : 18:15:58, Aug 2 2019
INFO: BL2: Doing platform setup
INFO: UFS LUN0 contains 1024 blocks with 4096-byte size
INFO: UFS LUN1 contains 1024 blocks with 4096-byte size
INFO: UFS LUN2 contains 2048 blocks with 4096-byte size
INFO: UFS LUN3 contains 7805952 blocks with 4096-byte size
INFO: ufs: change power mode success
INFO: BL2: Loading image id 2
INFO: Loading image id=2 at address 0x89c80000
INFO: Image id=2 loaded: 0x89c80000 - 0x89cb5088
INFO: BL2: Initiating SCP_BL2 transfer to SCP
INFO: BL2: SCP_BL2: 0x89c80000@0x35088
INFO: BL2: SCP_BL2 HEAD:
INFO: BL2: SCP_BL2 0x7000 0x179 0x159 0x149
INFO: BL2: SCP_BL2 0x189 0x18b 0x18d 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x18f
INFO: BL2: SCP_BL2 0x191 0x0 0x193 0x195
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
INFO: BL2: SCP_BL2 0x4d454355 0x43494741 0x424d554e 0x21215245
INFO: BL2: SCP_BL2 0x4a054904 0x42912000 0xf841bfbc 0xe7fa0b04
INFO: BL2: SCP_BL2 0xb88cf000 0x3b18 0x3d1c 0x6809493e
INFO: BL2: SCP_BL2 0x4613680a 0x201f102 0xf0002a04 0x600a804c
INFO: BL2: SCP_BL2 0x204f04f 0xf203fb02 0xf102440a 0x60100204
INFO: BL2: SCP_BL2 0x160f04f 0xf103fb01 0x68004834 0x61044408
INFO: BL2: SCP_BL2 0x61866145 0xf8c061c7 0xf8c08020 0xf8c09024
INFO: BL2: SCP_BL2 0xf8c0a028 0xf3efb02c 0xf3ef8208 0x68118309
INFO: BL2: SCP_BL2 0xf1026401 0xf0110204 0xbf070f04 0x46113220
INFO: BL2: SCP_BL2 TAIL:
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x19cad151 0x19b80040 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
INFO: BL2: SCP_BL2 transferred to SCP
INFO: start fw loading
INFO: fw load success
WARNING: BL2: Platform setup already done!!
INFO: BL2: Loading image id 3
INFO: Loading image id=3 at address 0x1ac58000
INFO: Image id=3 loaded: 0x1ac58000 - 0x1ac63024
INFO: BL2: Loading image id 5
INFO: Loading image id=5 at address 0x1ac98000
INFO: Image id=5 loaded: 0x1ac98000 - 0x1ad0819c
NOTICE: BL2: Booting BL31
INFO: Entry point address = 0x1ac58000
INFO: SPSR = 0x3cd
NOTICE: BL31: v2.1(debug):v2.1-531-g3ee48f40
NOTICE: BL31: Built : 18:16:01, Aug 2 2019
INFO: ARM GICv2 driver initialized
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: plat_setup_psci_ops: sec_entrypoint=0x1ac580fc
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x1ac98000
INFO: SPSR = 0x3c9
U-Boot 2019.07-00628-g286f05a6fc-dirty (Aug 02 2019 - 17:14:05 +0530)
Hikey960
DRAM: 3 GiB
PSCI: v1.1
MMC: dwmmc1@ff37f000: 0
Loading Environment from EXT4... ** File not found /uboot.env **
** Unable to read "/uboot.env" from mmc0:2 **
In: serial@fff32000
Out: serial@fff32000
Err: serial@fff32000
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
201 bytes read in 12 ms (15.6 KiB/s)
1: hikey960-kernel
Retrieving file: /Image
24689152 bytes read in 4377 ms (5.4 MiB/s)
append: earlycon=pl011,mmio32,0xfff32000 console=ttyAMA6,115200 rw root=/dev/mmcblk0p2 rot
Retrieving file: /hi3660-hikey960.dtb
35047 bytes read in 14 ms (2.4 MiB/s)
## Flattened Device Tree blob at 10000000
Booting using the fdt blob at 0x10000000
Using Device Tree in place at 0000000010000000, end 000000001000b8e6
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.2.0-03138-gd75da80dce39 (mani@Mani-XPS-13-9360) (gcc versi9
[ 0.000000] Machine model: HiKey960
[ 0.000000] earlycon: pl11 at MMIO32 0x00000000fff32000 (options '')
[ 0.000000] printk: bootconsole [pl11] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
Reference in a new issue View git blame Copy permalink