mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
6d0f6bcf33
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
469 lines
12 KiB
C
469 lines
12 KiB
C
/*
|
|
* cpu/ppc4xx/40x_spd_sdram.c
|
|
* This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a
|
|
* SDRAM controller. Those are all current 405 PPC's.
|
|
*
|
|
* (C) Copyright 2001
|
|
* Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
|
|
*
|
|
* Based on code by:
|
|
*
|
|
* Kenneth Johansson ,Ericsson AB.
|
|
* kenneth.johansson@etx.ericsson.se
|
|
*
|
|
* hacked up by bill hunter. fixed so we could run before
|
|
* serial_init and console_init. previous version avoided this by
|
|
* running out of cache memory during serial/console init, then running
|
|
* this code later.
|
|
*
|
|
* (C) Copyright 2002
|
|
* Jun Gu, Artesyn Technology, jung@artesyncp.com
|
|
* Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
|
|
*
|
|
* (C) Copyright 2005
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <i2c.h>
|
|
#include <ppc4xx.h>
|
|
|
|
#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_440)
|
|
|
|
/*
|
|
* Set default values
|
|
*/
|
|
#ifndef CONFIG_SYS_I2C_SPEED
|
|
#define CONFIG_SYS_I2C_SPEED 50000
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_I2C_SLAVE
|
|
#define CONFIG_SYS_I2C_SLAVE 0xFE
|
|
#endif
|
|
|
|
#define ONE_BILLION 1000000000
|
|
|
|
#define SDRAM0_CFG_DCE 0x80000000
|
|
#define SDRAM0_CFG_SRE 0x40000000
|
|
#define SDRAM0_CFG_PME 0x20000000
|
|
#define SDRAM0_CFG_MEMCHK 0x10000000
|
|
#define SDRAM0_CFG_REGEN 0x08000000
|
|
#define SDRAM0_CFG_ECCDD 0x00400000
|
|
#define SDRAM0_CFG_EMDULR 0x00200000
|
|
#define SDRAM0_CFG_DRW_SHIFT (31-6)
|
|
#define SDRAM0_CFG_BRPF_SHIFT (31-8)
|
|
|
|
#define SDRAM0_TR_CASL_SHIFT (31-8)
|
|
#define SDRAM0_TR_PTA_SHIFT (31-13)
|
|
#define SDRAM0_TR_CTP_SHIFT (31-15)
|
|
#define SDRAM0_TR_LDF_SHIFT (31-17)
|
|
#define SDRAM0_TR_RFTA_SHIFT (31-29)
|
|
#define SDRAM0_TR_RCD_SHIFT (31-31)
|
|
|
|
#define SDRAM0_RTR_SHIFT (31-15)
|
|
#define SDRAM0_ECCCFG_SHIFT (31-11)
|
|
|
|
/* SDRAM0_CFG enable macro */
|
|
#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
|
|
|
|
#define SDRAM0_BXCR_SZ_MASK 0x000e0000
|
|
#define SDRAM0_BXCR_AM_MASK 0x0000e000
|
|
|
|
#define SDRAM0_BXCR_SZ_SHIFT (31-14)
|
|
#define SDRAM0_BXCR_AM_SHIFT (31-18)
|
|
|
|
#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
|
|
#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
|
|
|
|
#ifdef CONFIG_SPDDRAM_SILENT
|
|
# define SPD_ERR(x) do { return 0; } while (0)
|
|
#else
|
|
# define SPD_ERR(x) do { printf(x); return(0); } while (0)
|
|
#endif
|
|
|
|
#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
|
|
|
|
/* function prototypes */
|
|
int spd_read(uint addr);
|
|
|
|
|
|
/*
|
|
* This function is reading data from the DIMM module EEPROM over the SPD bus
|
|
* and uses that to program the sdram controller.
|
|
*
|
|
* This works on boards that has the same schematics that the AMCC walnut has.
|
|
*
|
|
* Input: null for default I2C spd functions or a pointer to a custom function
|
|
* returning spd_data.
|
|
*/
|
|
|
|
long int spd_sdram(int(read_spd)(uint addr))
|
|
{
|
|
int tmp,row,col;
|
|
int total_size,bank_size,bank_code;
|
|
int ecc_on;
|
|
int mode;
|
|
int bank_cnt;
|
|
|
|
int sdram0_pmit=0x07c00000;
|
|
#ifndef CONFIG_405EP /* not on PPC405EP */
|
|
int sdram0_besr0 = -1;
|
|
int sdram0_besr1 = -1;
|
|
int sdram0_eccesr = -1;
|
|
#endif
|
|
int sdram0_ecccfg;
|
|
|
|
int sdram0_rtr=0;
|
|
int sdram0_tr=0;
|
|
|
|
int sdram0_b0cr;
|
|
int sdram0_b1cr;
|
|
int sdram0_b2cr;
|
|
int sdram0_b3cr;
|
|
|
|
int sdram0_cfg=0;
|
|
|
|
int t_rp;
|
|
int t_rcd;
|
|
int t_ras;
|
|
int t_rc;
|
|
int min_cas;
|
|
|
|
PPC4xx_SYS_INFO sys_info;
|
|
unsigned long bus_period_x_10;
|
|
|
|
/*
|
|
* get the board info
|
|
*/
|
|
get_sys_info(&sys_info);
|
|
bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
|
|
|
|
if (read_spd == 0){
|
|
read_spd=spd_read;
|
|
/*
|
|
* Make sure I2C controller is initialized
|
|
* before continuing.
|
|
*/
|
|
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
}
|
|
|
|
/* Make shure we are using SDRAM */
|
|
if (read_spd(2) != 0x04) {
|
|
SPD_ERR("SDRAM - non SDRAM memory module found\n");
|
|
}
|
|
|
|
/* ------------------------------------------------------------------
|
|
* configure memory timing register
|
|
*
|
|
* data from DIMM:
|
|
* 27 IN Row Precharge Time ( t RP)
|
|
* 29 MIN RAS to CAS Delay ( t RCD)
|
|
* 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
|
|
* -------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* first figure out which cas latency mode to use
|
|
* use the min supported mode
|
|
*/
|
|
|
|
tmp = read_spd(127) & 0x6;
|
|
if (tmp == 0x02) { /* only cas = 2 supported */
|
|
min_cas = 2;
|
|
/* t_ck = read_spd(9); */
|
|
/* t_ac = read_spd(10); */
|
|
} else if (tmp == 0x04) { /* only cas = 3 supported */
|
|
min_cas = 3;
|
|
/* t_ck = read_spd(9); */
|
|
/* t_ac = read_spd(10); */
|
|
} else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
|
|
min_cas = 2;
|
|
/* t_ck = read_spd(23); */
|
|
/* t_ac = read_spd(24); */
|
|
} else {
|
|
SPD_ERR("SDRAM - unsupported CAS latency \n");
|
|
}
|
|
|
|
/* get some timing values, t_rp,t_rcd,t_ras,t_rc
|
|
*/
|
|
t_rp = read_spd(27);
|
|
t_rcd = read_spd(29);
|
|
t_ras = read_spd(30);
|
|
t_rc = t_ras + t_rp;
|
|
|
|
/* The following timing calcs subtract 1 before deviding.
|
|
* this has effect of using ceiling instead of floor rounding,
|
|
* and also subtracting 1 to convert number to reg value
|
|
*/
|
|
/* set up CASL */
|
|
sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
|
|
/* set up PTA */
|
|
sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
|
|
/* set up CTP */
|
|
tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
|
|
if (tmp < 1)
|
|
tmp = 1;
|
|
sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
|
|
/* set LDF = 2 cycles, reg value = 1 */
|
|
sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
|
|
/* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
|
|
tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
|
|
if (tmp < 0)
|
|
tmp = 0;
|
|
if (tmp > 6)
|
|
tmp = 6;
|
|
sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
|
|
/* set RCD = t_rcd/bus_period*/
|
|
sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
|
|
|
|
|
|
/*------------------------------------------------------------------
|
|
* configure RTR register
|
|
* -------------------------------------------------------------------*/
|
|
row = read_spd(3);
|
|
col = read_spd(4);
|
|
tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
|
|
switch (tmp) {
|
|
case 0x00:
|
|
tmp = 15625;
|
|
break;
|
|
case 0x01:
|
|
tmp = 15625 / 4;
|
|
break;
|
|
case 0x02:
|
|
tmp = 15625 / 2;
|
|
break;
|
|
case 0x03:
|
|
tmp = 15625 * 2;
|
|
break;
|
|
case 0x04:
|
|
tmp = 15625 * 4;
|
|
break;
|
|
case 0x05:
|
|
tmp = 15625 * 8;
|
|
break;
|
|
default:
|
|
SPD_ERR("SDRAM - Bad refresh period \n");
|
|
}
|
|
/* convert from nsec to bus cycles */
|
|
tmp = (tmp * 10) / bus_period_x_10;
|
|
sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
|
|
|
|
/*------------------------------------------------------------------
|
|
* determine the number of banks used
|
|
* -------------------------------------------------------------------*/
|
|
/* byte 7:6 is module data width */
|
|
if (read_spd(7) != 0)
|
|
SPD_ERR("SDRAM - unsupported module width\n");
|
|
tmp = read_spd(6);
|
|
if (tmp < 32)
|
|
SPD_ERR("SDRAM - unsupported module width\n");
|
|
else if (tmp < 64)
|
|
bank_cnt = 1; /* one bank per sdram side */
|
|
else if (tmp < 73)
|
|
bank_cnt = 2; /* need two banks per side */
|
|
else if (tmp < 161)
|
|
bank_cnt = 4; /* need four banks per side */
|
|
else
|
|
SPD_ERR("SDRAM - unsupported module width\n");
|
|
|
|
/* byte 5 is the module row count (refered to as dimm "sides") */
|
|
tmp = read_spd(5);
|
|
if (tmp == 1)
|
|
;
|
|
else if (tmp==2)
|
|
bank_cnt *= 2;
|
|
else if (tmp==4)
|
|
bank_cnt *= 4;
|
|
else
|
|
bank_cnt = 8; /* 8 is an error code */
|
|
|
|
if (bank_cnt > 4) /* we only have 4 banks to work with */
|
|
SPD_ERR("SDRAM - unsupported module rows for this width\n");
|
|
|
|
/* now check for ECC ability of module. We only support ECC
|
|
* on 32 bit wide devices with 8 bit ECC.
|
|
*/
|
|
if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
|
|
sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
|
|
ecc_on = 1;
|
|
} else {
|
|
sdram0_ecccfg = 0;
|
|
ecc_on = 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------
|
|
* calculate total size
|
|
* -------------------------------------------------------------------*/
|
|
/* calculate total size and do sanity check */
|
|
tmp = read_spd(31);
|
|
total_size = 1 << 22; /* total_size = 4MB */
|
|
/* now multiply 4M by the smallest device row density */
|
|
/* note that we don't support asymetric rows */
|
|
while (((tmp & 0x0001) == 0) && (tmp != 0)) {
|
|
total_size = total_size << 1;
|
|
tmp = tmp >> 1;
|
|
}
|
|
total_size *= read_spd(5); /* mult by module rows (dimm sides) */
|
|
|
|
/*------------------------------------------------------------------
|
|
* map rows * cols * banks to a mode
|
|
* -------------------------------------------------------------------*/
|
|
|
|
switch (row) {
|
|
case 11:
|
|
switch (col) {
|
|
case 8:
|
|
mode=4; /* mode 5 */
|
|
break;
|
|
case 9:
|
|
case 10:
|
|
mode=0; /* mode 1 */
|
|
break;
|
|
default:
|
|
SPD_ERR("SDRAM - unsupported mode\n");
|
|
}
|
|
break;
|
|
case 12:
|
|
switch (col) {
|
|
case 8:
|
|
mode=3; /* mode 4 */
|
|
break;
|
|
case 9:
|
|
case 10:
|
|
mode=1; /* mode 2 */
|
|
break;
|
|
default:
|
|
SPD_ERR("SDRAM - unsupported mode\n");
|
|
}
|
|
break;
|
|
case 13:
|
|
switch (col) {
|
|
case 8:
|
|
mode=5; /* mode 6 */
|
|
break;
|
|
case 9:
|
|
case 10:
|
|
if (read_spd(17) == 2)
|
|
mode = 6; /* mode 7 */
|
|
else
|
|
mode = 2; /* mode 3 */
|
|
break;
|
|
case 11:
|
|
mode = 2; /* mode 3 */
|
|
break;
|
|
default:
|
|
SPD_ERR("SDRAM - unsupported mode\n");
|
|
}
|
|
break;
|
|
default:
|
|
SPD_ERR("SDRAM - unsupported mode\n");
|
|
}
|
|
|
|
/*------------------------------------------------------------------
|
|
* using the calculated values, compute the bank
|
|
* config register values.
|
|
* -------------------------------------------------------------------*/
|
|
sdram0_b1cr = 0;
|
|
sdram0_b2cr = 0;
|
|
sdram0_b3cr = 0;
|
|
|
|
/* compute the size of each bank */
|
|
bank_size = total_size / bank_cnt;
|
|
/* convert bank size to bank size code for ppc4xx
|
|
by takeing log2(bank_size) - 22 */
|
|
tmp = bank_size; /* start with tmp = bank_size */
|
|
bank_code = 0; /* and bank_code = 0 */
|
|
while (tmp > 1) { /* this takes log2 of tmp */
|
|
bank_code++; /* and stores result in bank_code */
|
|
tmp = tmp >> 1;
|
|
} /* bank_code is now log2(bank_size) */
|
|
bank_code -= 22; /* subtract 22 to get the code */
|
|
|
|
tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
|
|
sdram0_b0cr = (bank_size * 0) | tmp;
|
|
#ifndef CONFIG_405EP /* not on PPC405EP */
|
|
if (bank_cnt > 1)
|
|
sdram0_b2cr = (bank_size * 1) | tmp;
|
|
if (bank_cnt > 2)
|
|
sdram0_b1cr = (bank_size * 2) | tmp;
|
|
if (bank_cnt > 3)
|
|
sdram0_b3cr = (bank_size * 3) | tmp;
|
|
#else
|
|
/* PPC405EP chip only supports two SDRAM banks */
|
|
if (bank_cnt > 1)
|
|
sdram0_b1cr = (bank_size * 1) | tmp;
|
|
if (bank_cnt > 2)
|
|
total_size = 2 * bank_size;
|
|
#endif
|
|
|
|
/*
|
|
* enable sdram controller DCE=1
|
|
* enable burst read prefetch to 32 bytes BRPF=2
|
|
* leave other functions off
|
|
*/
|
|
|
|
/*------------------------------------------------------------------
|
|
* now that we've done our calculations, we are ready to
|
|
* program all the registers.
|
|
* -------------------------------------------------------------------*/
|
|
|
|
#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
|
|
/* disable memcontroller so updates work */
|
|
mtsdram0( mem_mcopt1, 0 );
|
|
|
|
#ifndef CONFIG_405EP /* not on PPC405EP */
|
|
mtsdram0( mem_besra , sdram0_besr0 );
|
|
mtsdram0( mem_besrb , sdram0_besr1 );
|
|
mtsdram0( mem_ecccf , sdram0_ecccfg );
|
|
mtsdram0( mem_eccerr, sdram0_eccesr );
|
|
#endif
|
|
mtsdram0( mem_rtr , sdram0_rtr );
|
|
mtsdram0( mem_pmit , sdram0_pmit );
|
|
mtsdram0( mem_mb0cf , sdram0_b0cr );
|
|
mtsdram0( mem_mb1cf , sdram0_b1cr );
|
|
#ifndef CONFIG_405EP /* not on PPC405EP */
|
|
mtsdram0( mem_mb2cf , sdram0_b2cr );
|
|
mtsdram0( mem_mb3cf , sdram0_b3cr );
|
|
#endif
|
|
mtsdram0( mem_sdtr1 , sdram0_tr );
|
|
|
|
/* SDRAM have a power on delay, 500 micro should do */
|
|
udelay(500);
|
|
sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
|
|
if (ecc_on)
|
|
sdram0_cfg |= SDRAM0_CFG_MEMCHK;
|
|
mtsdram0(mem_mcopt1, sdram0_cfg);
|
|
|
|
return (total_size);
|
|
}
|
|
|
|
int spd_read(uint addr)
|
|
{
|
|
uchar data[2];
|
|
|
|
if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
|
|
return (int)data[0];
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_SPD_EEPROM */
|