u-boot/board/toradex/colibri_imx6
Igor Opaniuk bfeaea7d84 colibri_imx6: fix broken fsl_esdhc_imx conversion
Not all CONFIG_FSL_ESDHC defines were properly replaced with
CONFIG_FSL_ESDHC_IMX, which broke U-boot proper booting on
Colibri iMX6 SoMs.

U-boot is stuck after this message:
Commercial temperature grade DDR3 timings, 64bit bus width.
Trying to boot from MMC1

Fixes: e37ac717d7("Convert to use fsl_esdhc_imx for i.MX platforms")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-12-27 09:35:29 +01:00
..
colibri_imx6.c colibri_imx6: fix broken fsl_esdhc_imx conversion 2019-12-27 09:35:29 +01:00
do_fuse.c colibri_imx6: revert fuse value set in mfgr_fuse 2019-04-13 20:30:09 +02:00
Kconfig arm: imx: initial support for colibri imx6 2016-12-16 10:03:43 +01:00
MAINTAINERS colibri_imx6: migrate to using device tree 2019-04-13 20:30:09 +02:00
Makefile arm: imx: initial support for colibri imx6 2016-12-16 10:03:43 +01:00
pf0100.c board: colibri_imx6: check for and report ecc errors in fuses 2019-04-13 20:30:09 +02:00
pf0100.h board: colibri_imx6: check for and report ecc errors in fuses 2019-04-13 20:30:09 +02:00
pf0100_otp.inc colibri_imx6: change pmic fusing according to hw 1.1 requirements 2019-04-13 20:30:09 +02:00