mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
c2120fbfbc
The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
194 lines
4.8 KiB
C
194 lines
4.8 KiB
C
/*
|
|
*
|
|
* (C) Copyright 2000-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2004-2007, 2012 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
|
|
#include <asm/immap.h>
|
|
#include <asm/io.h>
|
|
#include <asm/rtc.h>
|
|
#include <linux/compiler.h>
|
|
|
|
/*
|
|
* Breath some life into the CPU...
|
|
*
|
|
* Set up the memory map,
|
|
* initialize a bunch of registers,
|
|
* initialize the UPM's
|
|
*/
|
|
void cpu_init_f(void)
|
|
{
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS;
|
|
|
|
#if !defined(CONFIG_CF_SBF)
|
|
scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
|
|
pll_t *pll = (pll_t *)MMAP_PLL;
|
|
|
|
/* Workaround, must place before fbcs */
|
|
out_be32(&pll->psr, 0x12);
|
|
|
|
out_be32(&scm1->mpr, 0x77777777);
|
|
out_be32(&scm1->pacra, 0);
|
|
out_be32(&scm1->pacrb, 0);
|
|
out_be32(&scm1->pacrc, 0);
|
|
out_be32(&scm1->pacrd, 0);
|
|
out_be32(&scm1->pacre, 0);
|
|
out_be32(&scm1->pacrf, 0);
|
|
out_be32(&scm1->pacrg, 0);
|
|
out_be32(&scm1->pacri, 0);
|
|
|
|
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
|
|
&& defined(CONFIG_SYS_CS0_CTRL))
|
|
out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
|
|
out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
|
|
out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK);
|
|
#endif
|
|
#endif /* CONFIG_CF_SBF */
|
|
|
|
#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
|
|
&& defined(CONFIG_SYS_CS1_CTRL))
|
|
out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE);
|
|
out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL);
|
|
out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
|
|
&& defined(CONFIG_SYS_CS2_CTRL))
|
|
out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE);
|
|
out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL);
|
|
out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
|
|
&& defined(CONFIG_SYS_CS3_CTRL))
|
|
out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE);
|
|
out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL);
|
|
out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
|
|
&& defined(CONFIG_SYS_CS4_CTRL))
|
|
out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
|
|
out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
|
|
out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
|
|
&& defined(CONFIG_SYS_CS5_CTRL))
|
|
out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
|
|
out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
|
|
out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_FSL
|
|
out_8(&gpio->par_i2c, GPIO_PAR_I2C_SCL_SCL | GPIO_PAR_I2C_SDA_SDA);
|
|
#endif
|
|
|
|
icache_enable();
|
|
}
|
|
|
|
/*
|
|
* initialize higher level parts of CPU like timers
|
|
*/
|
|
int cpu_init_r(void)
|
|
{
|
|
#ifdef CONFIG_MCFRTC
|
|
rtc_t *rtc = (rtc_t *)(CONFIG_SYS_MCFRTC_BASE);
|
|
rtcex_t *rtcex = (rtcex_t *)&rtc->extended;
|
|
|
|
out_be32(&rtcex->gocu, (CONFIG_SYS_RTC_OSCILLATOR >> 16) & 0xffff);
|
|
out_be32(&rtcex->gocl, CONFIG_SYS_RTC_OSCILLATOR & 0xffff);
|
|
#endif
|
|
|
|
return (0);
|
|
}
|
|
|
|
void uart_port_conf(int port)
|
|
{
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
|
|
/* Setup Ports: */
|
|
switch (port) {
|
|
case 0:
|
|
clrbits_be16(&gpio->par_uart,
|
|
~(GPIO_PAR_UART_U0TXD_UNMASK & GPIO_PAR_UART_U0RXD_UNMASK));
|
|
setbits_be16(&gpio->par_uart,
|
|
GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
|
|
break;
|
|
case 1:
|
|
clrbits_be16(&gpio->par_uart,
|
|
~(GPIO_PAR_UART_U1TXD_UNMASK & GPIO_PAR_UART_U1RXD_UNMASK));
|
|
setbits_be16(&gpio->par_uart,
|
|
GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
|
|
break;
|
|
case 2:
|
|
clrbits_8(&gpio->par_dspi,
|
|
~(GPIO_PAR_DSPI_SIN_UNMASK & GPIO_PAR_DSPI_SOUT_UNMASK));
|
|
out_8(&gpio->par_dspi,
|
|
GPIO_PAR_DSPI_SIN_U2RXD | GPIO_PAR_DSPI_SOUT_U2TXD);
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_CF_DSPI
|
|
void cfspi_port_conf(void)
|
|
{
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
|
|
out_8(&gpio->par_dspi,
|
|
GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT |
|
|
GPIO_PAR_DSPI_SCK_SCK);
|
|
}
|
|
|
|
int cfspi_claim_bus(uint bus, uint cs)
|
|
{
|
|
dspi_t *dspi = (dspi_t *) MMAP_DSPI;
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
|
|
if ((in_be32(&dspi->sr) & DSPI_SR_TXRXS) != DSPI_SR_TXRXS)
|
|
return -1;
|
|
|
|
/* Clear FIFO and resume transfer */
|
|
clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
|
|
|
|
switch (cs) {
|
|
case 0:
|
|
clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_UNMASK);
|
|
setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
|
|
break;
|
|
case 2:
|
|
clrbits_8(&gpio->par_timer, ~GPIO_PAR_TIMER_T2IN_UNMASK);
|
|
setbits_8(&gpio->par_timer, GPIO_PAR_TIMER_T2IN_DSPIPCS2);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void cfspi_release_bus(uint bus, uint cs)
|
|
{
|
|
dspi_t *dspi = (dspi_t *) MMAP_DSPI;
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
|
|
/* Clear FIFO */
|
|
clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
|
|
|
|
switch (cs) {
|
|
case 0:
|
|
clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
|
|
break;
|
|
case 2:
|
|
clrbits_8(&gpio->par_timer, ~GPIO_PAR_TIMER_T2IN_UNMASK);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|