u-boot/include/configs/imx31_phycore.h
Tom Rini d56b4b1974 configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS
The above CONFIG options are in Kconfig, and now have correct depends and
inter-dependencies.  Migrate these to configs/ from include/configs/.  In the
case of CMD_UBIFS also change it to be a default y if CMD_UBI.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-24 20:35:55 -04:00

181 lines
5.3 KiB
C

/*
* (C) Copyright 2004
* Texas Instruments.
* Richard Woodruff <r-woodruff2@ti.com>
* Kshitij Gupta <kshitij@ti.com>
*
* Configuration settings for the phyCORE-i.MX31 board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
#define CONFIG_MX31 /* This is a mx31 */
#define CONFIG_MX31_CLK32 32000
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024)
/*
* Hardware drivers
*/
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
/***********************************************************
* Command definition
***********************************************************/
#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro," \
"1536k(kernel),-(root)"
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.23.168
#define CONFIG_SERVERIP 192.168.23.2
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
"bootargs_flash=setenv bootargs $(bootargs) " \
"root=/dev/mtdblock2 rootfstype=jffs2\0" \
"bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \
"bootcmd=run bootcmd_net\0" \
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs;" \
"tftpboot 0x80000000 $(uimage);bootm\0" \
"bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash;" \
"bootm 0x80000000\0" \
"unlock=yes\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"prg_uboot=tftpboot 0x80000000 $(uboot);" \
"protect off 0xa0000000 +0x20000;" \
"erase 0xa0000000 +0x20000;" \
"cp.b 0x80000000 0xa0000000 $(filesize)\0" \
"prg_kernel=tftpboot 0x80000000 $(uimage);" \
"erase 0xa0040000 +0x180000;" \
"cp.b 0x80000000 0xa0040000 $(filesize)\0" \
"prg_jffs2=tftpboot 0x80000000 $(jffs2);" \
"erase 0xa01c0000 0xa1ffffff;" \
"cp.b 0x80000000 0xa01c0000 $(filesize)\0" \
"videomode=video=ctfb:x:240,y:320,depth:16,mode:0," \
"pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1," \
"sync:1241513985,vmode:0\0"
#define CONFIG_SMC911X
#define CONFIG_SMC911X_BASE 0xa8000000
#define CONFIG_SMC911X_32_BIT
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 256
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
/* max number of command args */
#define CONFIG_SYS_MAXARGS 16
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x10000
#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */
#define CONFIG_CMDLINE_EDITING
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x80000000
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
#define CONFIG_SYS_TEXT_BASE 0xA0000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_GBL_DATA_OFFSET)
/*
* FLASH and environment organization
*/
#define CONFIG_SYS_FLASH_BASE 0xa0000000
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max # of sectors/chip */
/* Monitor at beginning of flash */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_ENV_IS_IN_EEPROM
#define CONFIG_ENV_OFFSET 0x00 /* env. starts here */
#define CONFIG_ENV_SIZE 4096
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10 ms delay */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* byte addr. lenght */
/*
* CFI FLASH driver setup
*/
#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/mtd/cfi_flash.c */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffered writes (~10x faster) */
#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */
/*
* Timeout for Flash Erase and Flash Write
* timeout values are in ticks
*/
#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ)
/*
* JFFS2 partitions
*/
#define CONFIG_JFFS2_DEV "nor0"
/* EET platform additions */
#ifdef CONFIG_TARGET_IMX31_PHYCORE_EET
#define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI
#define CONFIG_MXC_SPI
#define CONFIG_S6E63D6
#define CONFIG_VIDEO_MX3
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#endif
#endif /* __CONFIG_H */