mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 17:41:08 +00:00
2be296538e
This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
327 lines
9.7 KiB
C
327 lines
9.7 KiB
C
/*
|
|
* am335x_evm.h
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#ifndef __CONFIG_BALTOS_H
|
|
#define __CONFIG_BALTOS_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <configs/ti_am335x_common.h>
|
|
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 24000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK)
|
|
|
|
/* Custom script for NOR */
|
|
#define CONFIG_SYS_LDSCRIPT "board/vscom/baltos/u-boot.lds"
|
|
|
|
/* Always 128 KiB env size */
|
|
#define CONFIG_ENV_SIZE (128 << 10)
|
|
|
|
/* FIT support */
|
|
#define CONFIG_SYS_BOOTM_LEN SZ_64M
|
|
|
|
/* UBI Support */
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_MTD_DEVICE
|
|
|
|
/* I2C configuration */
|
|
#undef CONFIG_SYS_OMAP24_I2C_SPEED
|
|
#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
|
|
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
|
|
#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
|
|
#endif
|
|
#define NANDARGS \
|
|
"mtdids=" MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"${mtdparts} " \
|
|
"root=${nandroot} " \
|
|
"rootfstype=${nandrootfstype}\0" \
|
|
"nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
|
|
"nandrootfstype=ubifs rootwait=1\0" \
|
|
"nandboot=echo Booting from nand ...; " \
|
|
"run nandargs; " \
|
|
"setenv loadaddr 0x84000000; " \
|
|
"ubi part UBI; " \
|
|
"ubifsmount ubi0:kernel; " \
|
|
"ubifsload $loadaddr kernel-fit.itb;" \
|
|
"ubifsumount; " \
|
|
"bootm ${loadaddr}#conf${board_name}; " \
|
|
"if test $? -ne 0; then echo Using default FIT config; " \
|
|
"bootm ${loadaddr}; fi;\0"
|
|
#else
|
|
#define NANDARGS ""
|
|
#endif
|
|
|
|
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
DEFAULT_LINUX_BOOT_ENV \
|
|
"boot_fdt=try\0" \
|
|
"bootpart=0:2\0" \
|
|
"bootdir=/boot\0" \
|
|
"bootfile=zImage\0" \
|
|
"fdtfile=undefined\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"partitions=" \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
|
"optargs=\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcroot=/dev/mmcblk0p2 ro\0" \
|
|
"usbroot=/dev/sda2 ro\0" \
|
|
"mmcrootfstype=ext4 rootwait\0" \
|
|
"usbrootfstype=ext4 rootwait\0" \
|
|
"rootpath=/export/rootfs\0" \
|
|
"nfsopts=nolock\0" \
|
|
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
|
|
"::off\0" \
|
|
"ramroot=/dev/ram0 rw\0" \
|
|
"ramrootfstype=ext2\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"${mtdparts} " \
|
|
"root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype}\0" \
|
|
"usbargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"${mtdparts} " \
|
|
"root=${usbroot} " \
|
|
"rootfstype=${usbrootfstype}\0" \
|
|
"spiroot=/dev/mtdblock4 rw\0" \
|
|
"spirootfstype=jffs2\0" \
|
|
"spisrcaddr=0xe0000\0" \
|
|
"spiimgsize=0x362000\0" \
|
|
"spibusno=0\0" \
|
|
"spiargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=${spiroot} " \
|
|
"rootfstype=${spirootfstype}\0" \
|
|
"netargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=/dev/nfs " \
|
|
"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
|
|
"ip=dhcp\0" \
|
|
"bootenv=uEnv.txt\0" \
|
|
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
|
|
"usbloadbootenv=load usb 0:1 ${loadaddr} ${bootenv}\0" \
|
|
"importbootenv=echo Importing environment from mmc ...; " \
|
|
"env import -t $loadaddr $filesize\0" \
|
|
"usbimportbootenv=echo Importing environment from USB ...; " \
|
|
"env import -t $loadaddr $filesize\0" \
|
|
"ramargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=${ramroot} " \
|
|
"rootfstype=${ramrootfstype}\0" \
|
|
"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
|
|
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
|
|
"usbloadimage=load usb 0:1 ${loadaddr} kernel-fit.itb\0" \
|
|
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
|
|
"usbloados=run usbargs; " \
|
|
"bootm ${loadaddr}#conf${board_name}; " \
|
|
"if test $? -ne 0; then " \
|
|
"echo Using default FIT configuration; " \
|
|
"bootm ${loadaddr}; " \
|
|
"fi;\0" \
|
|
"mmcloados=run mmcargs; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if run loadfdt; then " \
|
|
"bootz ${loadaddr} - ${fdtaddr}; " \
|
|
"else " \
|
|
"if test ${boot_fdt} = try; then " \
|
|
"bootz; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else " \
|
|
"bootz; " \
|
|
"fi;\0" \
|
|
"usbboot=usb reset; " \
|
|
"if usb storage; then " \
|
|
"echo USB drive found;" \
|
|
"if run usbloadbootenv; then " \
|
|
"echo Loaded environment from ${bootenv};" \
|
|
"run usbimportbootenv;" \
|
|
"fi;" \
|
|
"if test -n $uenvcmd; then " \
|
|
"echo Running uenvcmd ...;" \
|
|
"run uenvcmd;" \
|
|
"fi;" \
|
|
"if run usbloadimage; then " \
|
|
"run usbloados;" \
|
|
"fi;" \
|
|
"fi;\0" \
|
|
"mmcboot=mmc dev ${mmcdev}; " \
|
|
"if mmc rescan; then " \
|
|
"echo SD/MMC found on device ${mmcdev};" \
|
|
"if run loadbootenv; then " \
|
|
"echo Loaded environment from ${bootenv};" \
|
|
"run importbootenv;" \
|
|
"fi;" \
|
|
"if test -n $uenvcmd; then " \
|
|
"echo Running uenvcmd ...;" \
|
|
"run uenvcmd;" \
|
|
"fi;" \
|
|
"if run loadimage; then " \
|
|
"run mmcloados;" \
|
|
"fi;" \
|
|
"fi;\0" \
|
|
"spiboot=echo Booting from spi ...; " \
|
|
"run spiargs; " \
|
|
"sf probe ${spibusno}:0; " \
|
|
"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
|
|
"bootz ${loadaddr}\0" \
|
|
"netboot=echo Booting from network ...; " \
|
|
"setenv autoload no; " \
|
|
"dhcp; " \
|
|
"tftp ${loadaddr} ${bootfile}; " \
|
|
"tftp ${fdtaddr} ${fdtfile}; " \
|
|
"run netargs; " \
|
|
"bootz ${loadaddr} - ${fdtaddr}\0" \
|
|
"ramboot=echo Booting from ramdisk ...; " \
|
|
"run ramargs; " \
|
|
"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
|
|
"findfdt=setenv fdtfile am335x-baltos.dtb\0" \
|
|
NANDARGS
|
|
/*DFUARGS*/
|
|
#endif
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run findfdt; " \
|
|
"run usbboot;" \
|
|
"run mmcboot;" \
|
|
"setenv mmcdev 1; " \
|
|
"setenv bootpart 1:2; " \
|
|
"run mmcboot;" \
|
|
"run nandboot;"
|
|
|
|
/* NS16550 Configuration */
|
|
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
|
|
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
|
|
#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
|
|
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
|
|
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
|
|
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
|
|
|
|
#define CONFIG_ENV_EEPROM_IS_ON_I2C
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
|
|
/* PMIC support */
|
|
#define CONFIG_POWER_TPS65910
|
|
|
|
/* SPL */
|
|
#ifndef CONFIG_NOR_BOOT
|
|
/* Bootcount using the RTC block */
|
|
#define CONFIG_BOOTCOUNT_LIMIT
|
|
#define CONFIG_BOOTCOUNT_AM33XX
|
|
|
|
/* USB gadget RNDIS */
|
|
|
|
/* General network SPL, both CPSW and USB gadget RNDIS */
|
|
#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/
|
|
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_NAND_OMAP_GPMC
|
|
#define CONFIG_NAND_OMAP_GPMC_PREFETCH
|
|
#define CONFIG_NAND_OMAP_ELM
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* USB configuration. We enable MUSB support, both for host and for
|
|
* gadget. We set USB0 as peripheral and USB1 as host, based on the
|
|
* board schematic and physical port wired to each. Then for host we
|
|
* add mass storage support and for gadget we add both RNDIS ethernet
|
|
* and DFU.
|
|
*/
|
|
#define CONFIG_USB_MUSB_DSPS
|
|
#define CONFIG_USB_MUSB_PIO_ONLY
|
|
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
|
|
#define CONFIG_AM335X_USB0
|
|
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
|
|
#define CONFIG_AM335X_USB1
|
|
#define CONFIG_AM335X_USB1_MODE MUSB_OTG
|
|
|
|
#ifdef CONFIG_USB_MUSB_GADGET
|
|
#define CONFIG_USB_ETHER
|
|
#define CONFIG_USB_ETH_RNDIS
|
|
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
|
|
#endif /* CONFIG_USB_MUSB_GADGET */
|
|
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
|
|
/* disable host part of MUSB in SPL */
|
|
/* disable EFI partitions and partition UUID support */
|
|
/*
|
|
* Disable CPSW SPL support so we fit within the 101KiB limit.
|
|
*/
|
|
#endif
|
|
|
|
/* Network. */
|
|
#define CONFIG_PHY_GIGE
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_PHY_ADDR 0
|
|
#define CONFIG_PHY_SMSC
|
|
#define CONFIG_MII
|
|
#define CONFIG_PHY_ATHEROS
|
|
|
|
/* NAND support */
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_CMD_NAND
|
|
#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
|
|
#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
|
|
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
|
|
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
|
|
"128k(SPL.backup1)," \
|
|
"128k(SPL.backup2)," \
|
|
"128k(SPL.backup3)," \
|
|
"1920k(u-boot)," \
|
|
"-(UBI)"
|
|
#endif
|
|
#endif
|
|
|
|
#endif /* ! __CONFIG_BALTOS_H */
|