mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
09c04c2096
There were a few files which were already using phy_read and phy_write for their PHY function names. It's only a few places, and the name seems most appropriate for the high-level abstraction, so let's rename the other versions to something more specific. Also, uec_phy.c had a marvell_init function which I renamed to not conflict with the one in marvell.c Lastly, uec_phy.c was putting a space between the phy writing function names, and the open paren, so I fixed that Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Detlev Zundel <dzu@denx.de>
978 lines
23 KiB
C
978 lines
23 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
|
|
* Martin Krause, Martin.Krause@tqs.de
|
|
* reworked original enc28j60.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <net.h>
|
|
#include <spi.h>
|
|
#include <malloc.h>
|
|
#include <netdev.h>
|
|
#include <miiphy.h>
|
|
#include "enc28j60.h"
|
|
|
|
/*
|
|
* IMPORTANT: spi_claim_bus() and spi_release_bus()
|
|
* are called at begin and end of each of the following functions:
|
|
* enc_miiphy_read(), enc_miiphy_write(), enc_write_hwaddr(),
|
|
* enc_init(), enc_recv(), enc_send(), enc_halt()
|
|
* ALL other functions assume that the bus has already been claimed!
|
|
* Since NetReceive() might call enc_send() in return, the bus must be
|
|
* released, NetReceive() called and claimed again.
|
|
*/
|
|
|
|
/*
|
|
* Controller memory layout.
|
|
* We only allow 1 frame for transmission and reserve the rest
|
|
* for reception to handle as many broadcast packets as possible.
|
|
* Also use the memory from 0x0000 for receiver buffer. See errata pt. 5
|
|
* 0x0000 - 0x19ff 6656 bytes receive buffer
|
|
* 0x1a00 - 0x1fff 1536 bytes transmit buffer =
|
|
* control(1)+frame(1518)+status(7)+reserve(10).
|
|
*/
|
|
#define ENC_RX_BUF_START 0x0000
|
|
#define ENC_RX_BUF_END 0x19ff
|
|
#define ENC_TX_BUF_START 0x1a00
|
|
#define ENC_TX_BUF_END 0x1fff
|
|
#define ENC_MAX_FRM_LEN 1518
|
|
#define RX_RESET_COUNTER 1000
|
|
|
|
/*
|
|
* For non data transfer functions, like phy read/write, set hwaddr, init
|
|
* we do not need a full, time consuming init including link ready wait.
|
|
* This enum helps to bring the chip through the minimum necessary inits.
|
|
*/
|
|
enum enc_initstate {none=0, setupdone, linkready};
|
|
typedef struct enc_device {
|
|
struct eth_device *dev; /* back pointer */
|
|
struct spi_slave *slave;
|
|
int rx_reset_counter;
|
|
u16 next_pointer;
|
|
u8 bank; /* current bank in enc28j60 */
|
|
enum enc_initstate initstate;
|
|
} enc_dev_t;
|
|
|
|
/*
|
|
* enc_bset: set bits in a common register
|
|
* enc_bclr: clear bits in a common register
|
|
*
|
|
* making the reg parameter u8 will give a compile time warning if the
|
|
* functions are called with a register not accessible in all Banks
|
|
*/
|
|
static void enc_bset(enc_dev_t *enc, const u8 reg, const u8 data)
|
|
{
|
|
u8 dout[2];
|
|
|
|
dout[0] = CMD_BFS(reg);
|
|
dout[1] = data;
|
|
spi_xfer(enc->slave, 2 * 8, dout, NULL,
|
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
|
}
|
|
|
|
static void enc_bclr(enc_dev_t *enc, const u8 reg, const u8 data)
|
|
{
|
|
u8 dout[2];
|
|
|
|
dout[0] = CMD_BFC(reg);
|
|
dout[1] = data;
|
|
spi_xfer(enc->slave, 2 * 8, dout, NULL,
|
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
|
}
|
|
|
|
/*
|
|
* high byte of the register contains bank number:
|
|
* 0: no bank switch necessary
|
|
* 1: switch to bank 0
|
|
* 2: switch to bank 1
|
|
* 3: switch to bank 2
|
|
* 4: switch to bank 3
|
|
*/
|
|
static void enc_set_bank(enc_dev_t *enc, const u16 reg)
|
|
{
|
|
u8 newbank = reg >> 8;
|
|
|
|
if (newbank == 0 || newbank == enc->bank)
|
|
return;
|
|
switch (newbank) {
|
|
case 1:
|
|
enc_bclr(enc, CTL_REG_ECON1,
|
|
ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1);
|
|
break;
|
|
case 2:
|
|
enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_BSEL0);
|
|
enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_BSEL1);
|
|
break;
|
|
case 3:
|
|
enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_BSEL0);
|
|
enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_BSEL1);
|
|
break;
|
|
case 4:
|
|
enc_bset(enc, CTL_REG_ECON1,
|
|
ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1);
|
|
break;
|
|
}
|
|
enc->bank = newbank;
|
|
}
|
|
|
|
/*
|
|
* local functions to access SPI
|
|
*
|
|
* reg: register inside ENC28J60
|
|
* data: 8/16 bits to write
|
|
* c: number of retries
|
|
*
|
|
* enc_r8: read 8 bits
|
|
* enc_r16: read 16 bits
|
|
* enc_w8: write 8 bits
|
|
* enc_w16: write 16 bits
|
|
* enc_w8_retry: write 8 bits, verify and retry
|
|
* enc_rbuf: read from ENC28J60 into buffer
|
|
* enc_wbuf: write from buffer into ENC28J60
|
|
*/
|
|
|
|
/*
|
|
* MAC and MII registers need a 3 byte SPI transfer to read,
|
|
* all other registers need a 2 byte SPI transfer.
|
|
*/
|
|
static int enc_reg2nbytes(const u16 reg)
|
|
{
|
|
/* check if MAC or MII register */
|
|
return ((reg >= CTL_REG_MACON1 && reg <= CTL_REG_MIRDH) ||
|
|
(reg >= CTL_REG_MAADR1 && reg <= CTL_REG_MAADR4) ||
|
|
(reg == CTL_REG_MISTAT)) ? 3 : 2;
|
|
}
|
|
|
|
/*
|
|
* Read a byte register
|
|
*/
|
|
static u8 enc_r8(enc_dev_t *enc, const u16 reg)
|
|
{
|
|
u8 dout[3];
|
|
u8 din[3];
|
|
int nbytes = enc_reg2nbytes(reg);
|
|
|
|
enc_set_bank(enc, reg);
|
|
dout[0] = CMD_RCR(reg);
|
|
spi_xfer(enc->slave, nbytes * 8, dout, din,
|
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
|
return din[nbytes-1];
|
|
}
|
|
|
|
/*
|
|
* Read a L/H register pair and return a word.
|
|
* Must be called with the L register's address.
|
|
*/
|
|
static u16 enc_r16(enc_dev_t *enc, const u16 reg)
|
|
{
|
|
u8 dout[3];
|
|
u8 din[3];
|
|
u16 result;
|
|
int nbytes = enc_reg2nbytes(reg);
|
|
|
|
enc_set_bank(enc, reg);
|
|
dout[0] = CMD_RCR(reg);
|
|
spi_xfer(enc->slave, nbytes * 8, dout, din,
|
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
|
result = din[nbytes-1];
|
|
dout[0]++; /* next register */
|
|
spi_xfer(enc->slave, nbytes * 8, dout, din,
|
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
|
result |= din[nbytes-1] << 8;
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Write a byte register
|
|
*/
|
|
static void enc_w8(enc_dev_t *enc, const u16 reg, const u8 data)
|
|
{
|
|
u8 dout[2];
|
|
|
|
enc_set_bank(enc, reg);
|
|
dout[0] = CMD_WCR(reg);
|
|
dout[1] = data;
|
|
spi_xfer(enc->slave, 2 * 8, dout, NULL,
|
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
|
}
|
|
|
|
/*
|
|
* Write a L/H register pair.
|
|
* Must be called with the L register's address.
|
|
*/
|
|
static void enc_w16(enc_dev_t *enc, const u16 reg, const u16 data)
|
|
{
|
|
u8 dout[2];
|
|
|
|
enc_set_bank(enc, reg);
|
|
dout[0] = CMD_WCR(reg);
|
|
dout[1] = data;
|
|
spi_xfer(enc->slave, 2 * 8, dout, NULL,
|
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
|
dout[0]++; /* next register */
|
|
dout[1] = data >> 8;
|
|
spi_xfer(enc->slave, 2 * 8, dout, NULL,
|
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
|
}
|
|
|
|
/*
|
|
* Write a byte register, verify and retry
|
|
*/
|
|
static void enc_w8_retry(enc_dev_t *enc, const u16 reg, const u8 data, const int c)
|
|
{
|
|
u8 dout[2];
|
|
u8 readback;
|
|
int i;
|
|
|
|
enc_set_bank(enc, reg);
|
|
for (i = 0; i < c; i++) {
|
|
dout[0] = CMD_WCR(reg);
|
|
dout[1] = data;
|
|
spi_xfer(enc->slave, 2 * 8, dout, NULL,
|
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
|
readback = enc_r8(enc, reg);
|
|
if (readback == data)
|
|
break;
|
|
/* wait 1ms */
|
|
udelay(1000);
|
|
}
|
|
if (i == c) {
|
|
printf("%s: write reg 0x%03x failed\n", enc->dev->name, reg);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read ENC RAM into buffer
|
|
*/
|
|
static void enc_rbuf(enc_dev_t *enc, const u16 length, u8 *buf)
|
|
{
|
|
u8 dout[1];
|
|
|
|
dout[0] = CMD_RBM;
|
|
spi_xfer(enc->slave, 8, dout, NULL, SPI_XFER_BEGIN);
|
|
spi_xfer(enc->slave, length * 8, NULL, buf, SPI_XFER_END);
|
|
#ifdef DEBUG
|
|
puts("Rx:\n");
|
|
print_buffer(0, buf, 1, length, 0);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Write buffer into ENC RAM
|
|
*/
|
|
static void enc_wbuf(enc_dev_t *enc, const u16 length, const u8 *buf, const u8 control)
|
|
{
|
|
u8 dout[2];
|
|
dout[0] = CMD_WBM;
|
|
dout[1] = control;
|
|
spi_xfer(enc->slave, 2 * 8, dout, NULL, SPI_XFER_BEGIN);
|
|
spi_xfer(enc->slave, length * 8, buf, NULL, SPI_XFER_END);
|
|
#ifdef DEBUG
|
|
puts("Tx:\n");
|
|
print_buffer(0, buf, 1, length, 0);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Try to claim the SPI bus.
|
|
* Print error message on failure.
|
|
*/
|
|
static int enc_claim_bus(enc_dev_t *enc)
|
|
{
|
|
int rc = spi_claim_bus(enc->slave);
|
|
if (rc)
|
|
printf("%s: failed to claim SPI bus\n", enc->dev->name);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Release previously claimed SPI bus.
|
|
* This function is mainly for symmetry to enc_claim_bus().
|
|
* Let the toolchain decide to inline it...
|
|
*/
|
|
static void enc_release_bus(enc_dev_t *enc)
|
|
{
|
|
spi_release_bus(enc->slave);
|
|
}
|
|
|
|
/*
|
|
* Read PHY register
|
|
*/
|
|
static u16 enc_phy_read(enc_dev_t *enc, const u8 addr)
|
|
{
|
|
uint64_t etime;
|
|
u8 status;
|
|
|
|
enc_w8(enc, CTL_REG_MIREGADR, addr);
|
|
enc_w8(enc, CTL_REG_MICMD, ENC_MICMD_MIIRD);
|
|
/* 1 second timeout - only happens on hardware problem */
|
|
etime = get_ticks() + get_tbclk();
|
|
/* poll MISTAT.BUSY bit until operation is complete */
|
|
do
|
|
{
|
|
status = enc_r8(enc, CTL_REG_MISTAT);
|
|
} while (get_ticks() <= etime && (status & ENC_MISTAT_BUSY));
|
|
if (status & ENC_MISTAT_BUSY) {
|
|
printf("%s: timeout reading phy\n", enc->dev->name);
|
|
return 0;
|
|
}
|
|
enc_w8(enc, CTL_REG_MICMD, 0);
|
|
return enc_r16(enc, CTL_REG_MIRDL);
|
|
}
|
|
|
|
/*
|
|
* Write PHY register
|
|
*/
|
|
static void enc_phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
|
|
{
|
|
uint64_t etime;
|
|
u8 status;
|
|
|
|
enc_w8(enc, CTL_REG_MIREGADR, addr);
|
|
enc_w16(enc, CTL_REG_MIWRL, data);
|
|
/* 1 second timeout - only happens on hardware problem */
|
|
etime = get_ticks() + get_tbclk();
|
|
/* poll MISTAT.BUSY bit until operation is complete */
|
|
do
|
|
{
|
|
status = enc_r8(enc, CTL_REG_MISTAT);
|
|
} while (get_ticks() <= etime && (status & ENC_MISTAT_BUSY));
|
|
if (status & ENC_MISTAT_BUSY) {
|
|
printf("%s: timeout writing phy\n", enc->dev->name);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Verify link status, wait if necessary
|
|
*
|
|
* Note: with a 10 MBit/s only PHY there is no autonegotiation possible,
|
|
* half/full duplex is a pure setup matter. For the time being, this driver
|
|
* will setup in half duplex mode only.
|
|
*/
|
|
static int enc_phy_link_wait(enc_dev_t *enc)
|
|
{
|
|
u16 status;
|
|
int duplex;
|
|
uint64_t etime;
|
|
|
|
#ifdef CONFIG_ENC_SILENTLINK
|
|
/* check if we have a link, then just return */
|
|
status = enc_phy_read(enc, PHY_REG_PHSTAT1);
|
|
if (status & ENC_PHSTAT1_LLSTAT)
|
|
return 0;
|
|
#endif
|
|
|
|
/* wait for link with 1 second timeout */
|
|
etime = get_ticks() + get_tbclk();
|
|
while (get_ticks() <= etime) {
|
|
status = enc_phy_read(enc, PHY_REG_PHSTAT1);
|
|
if (status & ENC_PHSTAT1_LLSTAT) {
|
|
/* now we have a link */
|
|
status = enc_phy_read(enc, PHY_REG_PHSTAT2);
|
|
duplex = (status & ENC_PHSTAT2_DPXSTAT) ? 1 : 0;
|
|
printf("%s: link up, 10Mbps %s-duplex\n",
|
|
enc->dev->name, duplex ? "full" : "half");
|
|
return 0;
|
|
}
|
|
udelay(1000);
|
|
}
|
|
|
|
/* timeout occured */
|
|
printf("%s: link down\n", enc->dev->name);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* This function resets the receiver only.
|
|
*/
|
|
static void enc_reset_rx(enc_dev_t *enc)
|
|
{
|
|
u8 econ1;
|
|
|
|
econ1 = enc_r8(enc, CTL_REG_ECON1);
|
|
if ((econ1 & ENC_ECON1_RXRST) == 0) {
|
|
enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXRST);
|
|
enc->rx_reset_counter = RX_RESET_COUNTER;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset receiver and reenable it.
|
|
*/
|
|
static void enc_reset_rx_call(enc_dev_t *enc)
|
|
{
|
|
enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_RXRST);
|
|
enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
|
|
}
|
|
|
|
/*
|
|
* Copy a packet from the receive ring and forward it to
|
|
* the protocol stack.
|
|
*/
|
|
static void enc_receive(enc_dev_t *enc)
|
|
{
|
|
u8 *packet = (u8 *)NetRxPackets[0];
|
|
u16 pkt_len;
|
|
u16 copy_len;
|
|
u16 status;
|
|
u8 eir_reg;
|
|
u8 pkt_cnt = 0;
|
|
u16 rxbuf_rdpt;
|
|
u8 hbuf[6];
|
|
|
|
enc_w16(enc, CTL_REG_ERDPTL, enc->next_pointer);
|
|
do {
|
|
enc_rbuf(enc, 6, hbuf);
|
|
enc->next_pointer = hbuf[0] | (hbuf[1] << 8);
|
|
pkt_len = hbuf[2] | (hbuf[3] << 8);
|
|
status = hbuf[4] | (hbuf[5] << 8);
|
|
debug("next_pointer=$%04x pkt_len=%u status=$%04x\n",
|
|
enc->next_pointer, pkt_len, status);
|
|
if (pkt_len <= ENC_MAX_FRM_LEN)
|
|
copy_len = pkt_len;
|
|
else
|
|
copy_len = 0;
|
|
if ((status & (1L << 7)) == 0) /* check Received Ok bit */
|
|
copy_len = 0;
|
|
/* check if next pointer is resonable */
|
|
if (enc->next_pointer >= ENC_TX_BUF_START)
|
|
copy_len = 0;
|
|
if (copy_len > 0) {
|
|
enc_rbuf(enc, copy_len, packet);
|
|
}
|
|
/* advance read pointer to next pointer */
|
|
enc_w16(enc, CTL_REG_ERDPTL, enc->next_pointer);
|
|
/* decrease packet counter */
|
|
enc_bset(enc, CTL_REG_ECON2, ENC_ECON2_PKTDEC);
|
|
/*
|
|
* Only odd values should be written to ERXRDPTL,
|
|
* see errata B4 pt.13
|
|
*/
|
|
rxbuf_rdpt = enc->next_pointer - 1;
|
|
if ((rxbuf_rdpt < enc_r16(enc, CTL_REG_ERXSTL)) ||
|
|
(rxbuf_rdpt > enc_r16(enc, CTL_REG_ERXNDL))) {
|
|
enc_w16(enc, CTL_REG_ERXRDPTL,
|
|
enc_r16(enc, CTL_REG_ERXNDL));
|
|
} else {
|
|
enc_w16(enc, CTL_REG_ERXRDPTL, rxbuf_rdpt);
|
|
}
|
|
/* read pktcnt */
|
|
pkt_cnt = enc_r8(enc, CTL_REG_EPKTCNT);
|
|
if (copy_len == 0) {
|
|
eir_reg = enc_r8(enc, CTL_REG_EIR);
|
|
enc_reset_rx(enc);
|
|
printf("%s: receive copy_len=0\n", enc->dev->name);
|
|
continue;
|
|
}
|
|
/*
|
|
* Because NetReceive() might call enc_send(), we need to
|
|
* release the SPI bus, call NetReceive(), reclaim the bus
|
|
*/
|
|
enc_release_bus(enc);
|
|
NetReceive(packet, pkt_len);
|
|
if (enc_claim_bus(enc))
|
|
return;
|
|
eir_reg = enc_r8(enc, CTL_REG_EIR);
|
|
} while (pkt_cnt);
|
|
/* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
|
|
}
|
|
|
|
/*
|
|
* Poll for completely received packets.
|
|
*/
|
|
static void enc_poll(enc_dev_t *enc)
|
|
{
|
|
u8 eir_reg;
|
|
u8 estat_reg;
|
|
u8 pkt_cnt;
|
|
|
|
#ifdef CONFIG_USE_IRQ
|
|
/* clear global interrupt enable bit in enc28j60 */
|
|
enc_bclr(enc, CTL_REG_EIE, ENC_EIE_INTIE);
|
|
#endif
|
|
estat_reg = enc_r8(enc, CTL_REG_ESTAT);
|
|
eir_reg = enc_r8(enc, CTL_REG_EIR);
|
|
if (eir_reg & ENC_EIR_TXIF) {
|
|
/* clear TXIF bit in EIR */
|
|
enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXIF);
|
|
}
|
|
/* We have to use pktcnt and not pktif bit, see errata pt. 6 */
|
|
pkt_cnt = enc_r8(enc, CTL_REG_EPKTCNT);
|
|
if (pkt_cnt > 0) {
|
|
if ((eir_reg & ENC_EIR_PKTIF) == 0) {
|
|
debug("enc_poll: pkt cnt > 0, but pktif not set\n");
|
|
}
|
|
enc_receive(enc);
|
|
/*
|
|
* clear PKTIF bit in EIR, this should not need to be done
|
|
* but it seems like we get problems if we do not
|
|
*/
|
|
enc_bclr(enc, CTL_REG_EIR, ENC_EIR_PKTIF);
|
|
}
|
|
if (eir_reg & ENC_EIR_RXERIF) {
|
|
printf("%s: rx error\n", enc->dev->name);
|
|
enc_bclr(enc, CTL_REG_EIR, ENC_EIR_RXERIF);
|
|
}
|
|
if (eir_reg & ENC_EIR_TXERIF) {
|
|
printf("%s: tx error\n", enc->dev->name);
|
|
enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXERIF);
|
|
}
|
|
#ifdef CONFIG_USE_IRQ
|
|
/* set global interrupt enable bit in enc28j60 */
|
|
enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Completely Reset the ENC
|
|
*/
|
|
static void enc_reset(enc_dev_t *enc)
|
|
{
|
|
u8 dout[1];
|
|
|
|
dout[0] = CMD_SRC;
|
|
spi_xfer(enc->slave, 8, dout, NULL,
|
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
|
/* sleep 1 ms. See errata pt. 2 */
|
|
udelay(1000);
|
|
}
|
|
|
|
/*
|
|
* Initialisation data for most of the ENC registers
|
|
*/
|
|
static const u16 enc_initdata[] = {
|
|
/*
|
|
* Setup the buffer space. The reset values are valid for the
|
|
* other pointers.
|
|
*
|
|
* We shall not write to ERXST, see errata pt. 5. Instead we
|
|
* have to make sure that ENC_RX_BUS_START is 0.
|
|
*/
|
|
CTL_REG_ERXSTL, ENC_RX_BUF_START,
|
|
CTL_REG_ERXSTH, ENC_RX_BUF_START >> 8,
|
|
CTL_REG_ERXNDL, ENC_RX_BUF_END,
|
|
CTL_REG_ERXNDH, ENC_RX_BUF_END >> 8,
|
|
CTL_REG_ERDPTL, ENC_RX_BUF_START,
|
|
CTL_REG_ERDPTH, ENC_RX_BUF_START >> 8,
|
|
/*
|
|
* Set the filter to receive only good-CRC, unicast and broadcast
|
|
* frames.
|
|
* Note: some DHCP servers return their answers as broadcasts!
|
|
* So its unwise to remove broadcast from this. This driver
|
|
* might incur receiver overruns with packet loss on a broadcast
|
|
* flooded network.
|
|
*/
|
|
CTL_REG_ERXFCON, ENC_RFR_BCEN | ENC_RFR_UCEN | ENC_RFR_CRCEN,
|
|
|
|
/* enable MAC to receive frames */
|
|
CTL_REG_MACON1,
|
|
ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS,
|
|
|
|
/* configure pad, tx-crc and duplex */
|
|
CTL_REG_MACON3,
|
|
ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN |
|
|
ENC_MACON3_FRMLNEN,
|
|
|
|
/* Allow infinite deferals if the medium is continously busy */
|
|
CTL_REG_MACON4, ENC_MACON4_DEFER,
|
|
|
|
/* Late collisions occur beyond 63 bytes */
|
|
CTL_REG_MACLCON2, 63,
|
|
|
|
/*
|
|
* Set (low byte) Non-Back-to_Back Inter-Packet Gap.
|
|
* Recommended 0x12
|
|
*/
|
|
CTL_REG_MAIPGL, 0x12,
|
|
|
|
/*
|
|
* Set (high byte) Non-Back-to_Back Inter-Packet Gap.
|
|
* Recommended 0x0c for half-duplex. Nothing for full-duplex
|
|
*/
|
|
CTL_REG_MAIPGH, 0x0C,
|
|
|
|
/* set maximum frame length */
|
|
CTL_REG_MAMXFLL, ENC_MAX_FRM_LEN,
|
|
CTL_REG_MAMXFLH, ENC_MAX_FRM_LEN >> 8,
|
|
|
|
/*
|
|
* Set MAC back-to-back inter-packet gap.
|
|
* Recommended 0x12 for half duplex
|
|
* and 0x15 for full duplex.
|
|
*/
|
|
CTL_REG_MABBIPG, 0x12,
|
|
|
|
/* end of table */
|
|
0xffff
|
|
};
|
|
|
|
/*
|
|
* Wait for the XTAL oscillator to become ready
|
|
*/
|
|
static int enc_clock_wait(enc_dev_t *enc)
|
|
{
|
|
uint64_t etime;
|
|
|
|
/* one second timeout */
|
|
etime = get_ticks() + get_tbclk();
|
|
|
|
/*
|
|
* Wait for CLKRDY to become set (i.e., check that we can
|
|
* communicate with the ENC)
|
|
*/
|
|
do
|
|
{
|
|
if (enc_r8(enc, CTL_REG_ESTAT) & ENC_ESTAT_CLKRDY)
|
|
return 0;
|
|
} while (get_ticks() <= etime);
|
|
|
|
printf("%s: timeout waiting for CLKRDY\n", enc->dev->name);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Write the MAC address into the ENC
|
|
*/
|
|
static int enc_write_macaddr(enc_dev_t *enc)
|
|
{
|
|
unsigned char *p = enc->dev->enetaddr;
|
|
|
|
enc_w8_retry(enc, CTL_REG_MAADR5, *p++, 5);
|
|
enc_w8_retry(enc, CTL_REG_MAADR4, *p++, 5);
|
|
enc_w8_retry(enc, CTL_REG_MAADR3, *p++, 5);
|
|
enc_w8_retry(enc, CTL_REG_MAADR2, *p++, 5);
|
|
enc_w8_retry(enc, CTL_REG_MAADR1, *p++, 5);
|
|
enc_w8_retry(enc, CTL_REG_MAADR0, *p, 5);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Setup most of the ENC registers
|
|
*/
|
|
static int enc_setup(enc_dev_t *enc)
|
|
{
|
|
u16 phid1 = 0;
|
|
u16 phid2 = 0;
|
|
const u16 *tp;
|
|
|
|
/* reset enc struct values */
|
|
enc->next_pointer = ENC_RX_BUF_START;
|
|
enc->rx_reset_counter = RX_RESET_COUNTER;
|
|
enc->bank = 0xff; /* invalidate current bank in enc28j60 */
|
|
|
|
/* verify PHY identification */
|
|
phid1 = enc_phy_read(enc, PHY_REG_PHID1);
|
|
phid2 = enc_phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
|
|
if (phid1 != ENC_PHID1_VALUE || phid2 != ENC_PHID2_VALUE) {
|
|
printf("%s: failed to identify PHY. Found %04x:%04x\n",
|
|
enc->dev->name, phid1, phid2);
|
|
return -1;
|
|
}
|
|
|
|
/* now program registers */
|
|
for (tp = enc_initdata; *tp != 0xffff; tp += 2)
|
|
enc_w8_retry(enc, tp[0], tp[1], 10);
|
|
|
|
/*
|
|
* Prevent automatic loopback of data beeing transmitted by setting
|
|
* ENC_PHCON2_HDLDIS
|
|
*/
|
|
enc_phy_write(enc, PHY_REG_PHCON2, (1<<8));
|
|
|
|
/*
|
|
* LEDs configuration
|
|
* LEDA: LACFG = 0100 -> display link status
|
|
* LEDB: LBCFG = 0111 -> display TX & RX activity
|
|
* STRCH = 1 -> LED pulses
|
|
*/
|
|
enc_phy_write(enc, PHY_REG_PHLCON, 0x0472);
|
|
|
|
/* Reset PDPXMD-bit => half duplex */
|
|
enc_phy_write(enc, PHY_REG_PHCON1, 0);
|
|
|
|
#ifdef CONFIG_USE_IRQ
|
|
/* enable interrupts */
|
|
enc_bset(enc, CTL_REG_EIE, ENC_EIE_PKTIE);
|
|
enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXIE);
|
|
enc_bset(enc, CTL_REG_EIE, ENC_EIE_RXERIE);
|
|
enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXERIE);
|
|
enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check if ENC has been initialized.
|
|
* If not, try to initialize it.
|
|
* Remember initialized state in struct.
|
|
*/
|
|
static int enc_initcheck(enc_dev_t *enc, const enum enc_initstate requiredstate)
|
|
{
|
|
if (enc->initstate >= requiredstate)
|
|
return 0;
|
|
|
|
if (enc->initstate < setupdone) {
|
|
/* Initialize the ENC only */
|
|
enc_reset(enc);
|
|
/* if any of functions fails, skip the rest and return an error */
|
|
if (enc_clock_wait(enc) || enc_setup(enc) || enc_write_macaddr(enc)) {
|
|
return -1;
|
|
}
|
|
enc->initstate = setupdone;
|
|
}
|
|
/* if that's all we need, return here */
|
|
if (enc->initstate >= requiredstate)
|
|
return 0;
|
|
|
|
/* now wait for link ready condition */
|
|
if (enc_phy_link_wait(enc)) {
|
|
return -1;
|
|
}
|
|
enc->initstate = linkready;
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_MII)
|
|
/*
|
|
* Read a PHY register.
|
|
*
|
|
* This function is registered with miiphy_register().
|
|
*/
|
|
int enc_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
|
|
{
|
|
struct eth_device *dev = eth_get_dev_by_name(devname);
|
|
enc_dev_t *enc;
|
|
|
|
if (!dev || phy_adr != 0)
|
|
return -1;
|
|
|
|
enc = dev->priv;
|
|
if (enc_claim_bus(enc))
|
|
return -1;
|
|
if (enc_initcheck(enc, setupdone)) {
|
|
enc_release_bus(enc);
|
|
return -1;
|
|
}
|
|
*value = enc_phy_read(enc, reg);
|
|
enc_release_bus(enc);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Write a PHY register.
|
|
*
|
|
* This function is registered with miiphy_register().
|
|
*/
|
|
int enc_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
|
|
{
|
|
struct eth_device *dev = eth_get_dev_by_name(devname);
|
|
enc_dev_t *enc;
|
|
|
|
if (!dev || phy_adr != 0)
|
|
return -1;
|
|
|
|
enc = dev->priv;
|
|
if (enc_claim_bus(enc))
|
|
return -1;
|
|
if (enc_initcheck(enc, setupdone)) {
|
|
enc_release_bus(enc);
|
|
return -1;
|
|
}
|
|
enc_phy_write(enc, reg, value);
|
|
enc_release_bus(enc);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Write hardware (MAC) address.
|
|
*
|
|
* This function entered into eth_device structure.
|
|
*/
|
|
static int enc_write_hwaddr(struct eth_device *dev)
|
|
{
|
|
enc_dev_t *enc = dev->priv;
|
|
|
|
if (enc_claim_bus(enc))
|
|
return -1;
|
|
if (enc_initcheck(enc, setupdone)) {
|
|
enc_release_bus(enc);
|
|
return -1;
|
|
}
|
|
enc_release_bus(enc);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialize ENC28J60 for use.
|
|
*
|
|
* This function entered into eth_device structure.
|
|
*/
|
|
static int enc_init(struct eth_device *dev, bd_t *bis)
|
|
{
|
|
enc_dev_t *enc = dev->priv;
|
|
|
|
if (enc_claim_bus(enc))
|
|
return -1;
|
|
if (enc_initcheck(enc, linkready)) {
|
|
enc_release_bus(enc);
|
|
return -1;
|
|
}
|
|
/* enable receive */
|
|
enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
|
|
enc_release_bus(enc);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check for received packets.
|
|
*
|
|
* This function entered into eth_device structure.
|
|
*/
|
|
static int enc_recv(struct eth_device *dev)
|
|
{
|
|
enc_dev_t *enc = dev->priv;
|
|
|
|
if (enc_claim_bus(enc))
|
|
return -1;
|
|
if (enc_initcheck(enc, linkready)) {
|
|
enc_release_bus(enc);
|
|
return -1;
|
|
}
|
|
/* Check for dead receiver */
|
|
if (enc->rx_reset_counter > 0)
|
|
enc->rx_reset_counter--;
|
|
else
|
|
enc_reset_rx_call(enc);
|
|
enc_poll(enc);
|
|
enc_release_bus(enc);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Send a packet.
|
|
*
|
|
* This function entered into eth_device structure.
|
|
*
|
|
* Should we wait here until we have a Link? Or shall we leave that to
|
|
* protocol retries?
|
|
*/
|
|
static int enc_send(
|
|
struct eth_device *dev,
|
|
volatile void *packet,
|
|
int length)
|
|
{
|
|
enc_dev_t *enc = dev->priv;
|
|
|
|
if (enc_claim_bus(enc))
|
|
return -1;
|
|
if (enc_initcheck(enc, linkready)) {
|
|
enc_release_bus(enc);
|
|
return -1;
|
|
}
|
|
/* setup transmit pointers */
|
|
enc_w16(enc, CTL_REG_EWRPTL, ENC_TX_BUF_START);
|
|
enc_w16(enc, CTL_REG_ETXNDL, length + ENC_TX_BUF_START);
|
|
enc_w16(enc, CTL_REG_ETXSTL, ENC_TX_BUF_START);
|
|
/* write packet to ENC */
|
|
enc_wbuf(enc, length, (u8 *) packet, 0x00);
|
|
/*
|
|
* Check that the internal transmit logic has not been altered
|
|
* by excessive collisions. Reset transmitter if so.
|
|
* See Errata B4 12 and 14.
|
|
*/
|
|
if (enc_r8(enc, CTL_REG_EIR) & ENC_EIR_TXERIF) {
|
|
enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_TXRST);
|
|
enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_TXRST);
|
|
}
|
|
enc_bclr(enc, CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
|
|
/* start transmitting */
|
|
enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_TXRTS);
|
|
enc_release_bus(enc);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Finish use of ENC.
|
|
*
|
|
* This function entered into eth_device structure.
|
|
*/
|
|
static void enc_halt(struct eth_device *dev)
|
|
{
|
|
enc_dev_t *enc = dev->priv;
|
|
|
|
if (enc_claim_bus(enc))
|
|
return;
|
|
/* Just disable receiver */
|
|
enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
|
|
enc_release_bus(enc);
|
|
}
|
|
|
|
/*
|
|
* This is the only exported function.
|
|
*
|
|
* It may be called several times with different bus:cs combinations.
|
|
*/
|
|
int enc28j60_initialize(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct eth_device *dev;
|
|
enc_dev_t *enc;
|
|
|
|
/* try to allocate, check and clear eth_device object */
|
|
dev = malloc(sizeof(*dev));
|
|
if (!dev) {
|
|
return -1;
|
|
}
|
|
memset(dev, 0, sizeof(*dev));
|
|
|
|
/* try to allocate, check and clear enc_dev_t object */
|
|
enc = malloc(sizeof(*enc));
|
|
if (!enc) {
|
|
free(dev);
|
|
return -1;
|
|
}
|
|
memset(enc, 0, sizeof(*enc));
|
|
|
|
/* try to setup the SPI slave */
|
|
enc->slave = spi_setup_slave(bus, cs, max_hz, mode);
|
|
if (!enc->slave) {
|
|
printf("enc28j60: invalid SPI device %i:%i\n", bus, cs);
|
|
free(enc);
|
|
free(dev);
|
|
return -1;
|
|
}
|
|
|
|
enc->dev = dev;
|
|
/* now fill the eth_device object */
|
|
dev->priv = enc;
|
|
dev->init = enc_init;
|
|
dev->halt = enc_halt;
|
|
dev->send = enc_send;
|
|
dev->recv = enc_recv;
|
|
dev->write_hwaddr = enc_write_hwaddr;
|
|
sprintf(dev->name, "enc%i.%i", bus, cs);
|
|
eth_register(dev);
|
|
#if defined(CONFIG_CMD_MII)
|
|
miiphy_register(dev->name, enc_miiphy_read, enc_miiphy_write);
|
|
#endif
|
|
return 0;
|
|
}
|