u-boot/board/freescale/common/arm_sleep.c
Hongbo Zhang 214ffae02d nxp: ls102xa: add LS1 PSCI system suspend
The deep sleep function of LS1 platform, is mapped into PSCI system
suspend function, this patch adds implementation of it.

Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:08:04 -07:00

130 lines
2.7 KiB
C

/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#ifndef CONFIG_ARMV7_NONSEC
#error " Deep sleep needs non-secure mode support. "
#else
#include <asm/secure.h>
#endif
#include <asm/armv7.h>
#if defined(CONFIG_LS102XA)
#include <asm/arch/immap_ls102xa.h>
#endif
#include "sleep.h"
#ifdef CONFIG_U_QE
#include <fsl_qe.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
void __weak board_mem_sleep_setup(void)
{
}
void __weak board_sleep_prepare(void)
{
}
bool is_warm_boot(void)
{
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
return 1;
return 0;
}
void fsl_dp_disable_console(void)
{
gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
}
/*
* When wakeup from deep sleep, the first 128 bytes space
* will be used to do DDR training which corrupts the data
* in there. This function will restore them.
*/
static void dp_ddr_restore(void)
{
u64 *src, *dst;
int i;
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
/* get the address of ddr date from SPARECR3 */
src = (u64 *)in_le32(&scfg->sparecr[2]);
dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
for (i = 0; i < DDR_BUFF_LEN / 8; i++)
*dst++ = *src++;
}
#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_LS102XA)
void ls1_psci_resume_fixup(void)
{
u32 tmp;
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
#ifdef QIXIS_BASE
void *qixis_base = (void *)QIXIS_BASE;
/* Pull on PCIe RST# */
out_8(qixis_base + QIXIS_RST_FORCE_3, 0);
/* disable deep sleep signals in FPGA */
tmp = in_8(qixis_base + QIXIS_PWR_CTL2);
tmp &= ~QIXIS_PWR_CTL2_PCTL;
out_8(qixis_base + QIXIS_PWR_CTL2, tmp);
#endif
/* Disable wakeup interrupt during deep sleep */
out_be32(&scfg->pmcintecr, 0);
/* Clear PMC interrupt status */
out_be32(&scfg->pmcintsr, 0xffffffff);
/* Disable Warm Device Reset */
tmp = in_be32(&scfg->dpslpcr);
tmp &= ~SCFG_DPSLPCR_WDRR_EN;
out_be32(&scfg->dpslpcr, tmp);
}
#endif
static void dp_resume_prepare(void)
{
dp_ddr_restore();
board_sleep_prepare();
armv7_init_nonsec();
#ifdef CONFIG_U_QE
u_qe_resume();
#endif
#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_LS102XA)
ls1_psci_resume_fixup();
#endif
}
int fsl_dp_resume(void)
{
u32 start_addr;
void (*kernel_resume)(void);
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
if (!is_warm_boot())
return 0;
dp_resume_prepare();
/* Get the entry address and jump to kernel */
start_addr = in_le32(&scfg->sparecr[3]);
debug("Entry address is 0x%08x\n", start_addr);
kernel_resume = (void (*)(void))start_addr;
secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0);
return 0;
}