mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 02:08:38 +00:00
9b15ce9193
Add board and SoC dts Add ddr training code support SD/MMC/GPIO/PINCTRL/UART Signed-off-by: Peng Fan <peng.fan@nxp.com>
37 lines
959 B
Text
37 lines
959 B
Text
U-Boot for the NXP i.MX8MM EVK board
|
|
|
|
Quick Start
|
|
===========
|
|
- Build the ARM Trusted firmware binary
|
|
- Get ddr fimware
|
|
- Build U-Boot
|
|
- Boot
|
|
|
|
Get and Build the ARM Trusted firmware
|
|
======================================
|
|
Note: srctree is U-Boot source directory
|
|
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
|
|
branch: imx_4.19.35_1.0.0
|
|
$ make PLAT=imx8mm bl31
|
|
$ cp build/imx8mm/release/bl31.bin $(srctree)
|
|
|
|
Get the ddr and hdmi firmware
|
|
=============================
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
|
|
$ chmod +x firmware-imx-8.0.bin
|
|
$ ./firmware-imx-8.0
|
|
$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
|
|
|
|
Build U-Boot
|
|
============
|
|
$ export CROSS_COMPILE=aarch64-poky-linux-
|
|
$ make imx8mm_evk_defconfig
|
|
$ export ATF_LOAD_ADDR=0x920000
|
|
$ make flash.bin
|
|
|
|
Burn the flash.bin to MicroSD card offset 33KB
|
|
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
|
|
|
|
Boot
|
|
====
|
|
Set Boot switch to SD boot
|