u-boot/board/netstal/hcu4
Peter Tyser 858290178f ppc: Enable full relocation to RAM
The following changes allow U-Boot to fully relocate from flash to
RAM:
 - Remove linker scripts' .fixup sections from the .text section
 - Add -mrelocatable to PLATFORM_RELFLAGS for all boards
 - Define CONFIG_RELOC_FIXUP_WORKS for all boards

Previously, U-Boot would partially relocate, but statically initialized
pointers needed to be manually relocated.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-03 10:15:45 +02:00
..
config.mk ppc4xx: Netstal HCU4 board. Added POST. Various fixes 2008-01-17 13:49:51 +01:00
hcu4.c ppc4xx: Convert PPC4xx UIC defines from lower case to upper case 2009-09-28 10:45:42 +02:00
Makefile Cleanup out-or-tree building for some boards (.depend) 2008-07-02 23:49:18 +02:00
README.txt Add PPC4xx-HCU4 and HCU5 boards: READMEs 2007-08-10 09:09:19 +02:00
u-boot.lds ppc: Enable full relocation to RAM 2009-10-03 10:15:45 +02:00

HCU4 Configuration Details

Memory Bank 0 -- Flash chip
---------------------------

0xfff00000 - 0xffffffff

The flash chip is really only 512Kbytes, but the high address bit of
the 1Meg region is ignored, so the flash is replicated through the
region. Thus, this is consistent with a flash base address 0xfff80000.

The placement at the end is to be consistent with reset behavior,
where the processor itself initially uses this bus to load the branch
vector and start running.

On-Chip Memory
--------------

0xf4000000 - 0xf4000fff

The 405GPr includes a 4K on-chip memory that can be placed however
software chooses. I choose to place the memory at this address, to
keep it out of the cachable areas.


Internal Peripherals
--------------------

0xef600300 - 0xef6008ff

These are scattered various peripherals internal to the PPC405GPr
chip.

Chip-Select 2: Flash Memory
---------------------------

0x70000000

Chip-Select 3: CAN Interface
----------------------------
0x7800000


Chip-Select 4: IMC-bus standard
-------------------------------

Our IO-Bus (slow version)


Chip-Select 5: IMC-bus fast (inactive)
--------------------------------------

Our IO-Bus (fast, but not yet use)


Memory Bank 1 -- SDRAM
-------------------------------------

0x00000000 - 0x1ffffff   # Default 32 MB