mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-20 03:38:43 +00:00
3ca55bce9c
Remove Ethernet node fixup from mgcoge and muas3001 boards and modify its configs for the common mpc8260 code to use generic Ethernet fixup. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> Tested-by: Heiko Schocher <hs@denx.de>
367 lines
16 KiB
C
367 lines
16 KiB
C
/*
|
|
* (C) Copyright 2008
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8260.h>
|
|
#include <ioports.h>
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
|
|
#include <libfdt.h>
|
|
#endif
|
|
|
|
/*
|
|
* I/O Port configuration table
|
|
*
|
|
* if conf is 1, then that port pin will be configured at boot time
|
|
* according to the five values podr/pdir/ppar/psor/pdat for that entry
|
|
*/
|
|
const iop_conf_t iop_conf_tab[4][32] = {
|
|
|
|
/* Port A */
|
|
{ /* conf ppar psor pdir podr pdat */
|
|
/* PA31 */ { 0, 0, 0, 0, 0, 0 }, /* PA31 */
|
|
/* PA30 */ { 0, 0, 0, 0, 0, 0 }, /* PA30 */
|
|
/* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */
|
|
/* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */
|
|
/* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */
|
|
/* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */
|
|
/* PA25 */ { 1, 0, 0, 1, 0, 0 }, /* ETH_PWRDWN */
|
|
/* PA24 */ { 1, 0, 0, 1, 0, 1 }, /* ETH_RESET */
|
|
/* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */
|
|
/* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */
|
|
/* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */
|
|
/* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */
|
|
/* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */
|
|
/* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */
|
|
/* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */
|
|
/* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */
|
|
/* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */
|
|
/* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */
|
|
/* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */
|
|
/* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* ETH_SLEEP */
|
|
/* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */
|
|
/* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* MDIO */
|
|
/* PA9 */ { 1, 0, 0, 1, 0, 0 }, /* MDC */
|
|
/* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RxD */
|
|
/* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */
|
|
/* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */
|
|
/* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */
|
|
/* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */
|
|
/* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */
|
|
/* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */
|
|
/* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */
|
|
/* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */
|
|
},
|
|
|
|
/* Port B */
|
|
{ /* conf ppar psor pdir podr pdat */
|
|
/* PB31 */ { 0, 0, 0, 0, 0, 0 }, /* PB31 */
|
|
/* PB30 */ { 0, 0, 0, 0, 0, 0 }, /* PB30 */
|
|
/* PB29 */ { 0, 0, 0, 0, 0, 0 }, /* PB29 */
|
|
/* PB28 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TxD */
|
|
/* PB27 */ { 0, 0, 0, 0, 0, 0 }, /* PB27 */
|
|
/* PB26 */ { 0, 0, 0, 0, 0, 0 }, /* PB26 */
|
|
/* PB25 */ { 0, 0, 0, 0, 0, 0 }, /* PB25 */
|
|
/* PB24 */ { 0, 0, 0, 0, 0, 0 }, /* PB24 */
|
|
/* PB23 */ { 0, 0, 0, 0, 0, 0 }, /* PB23 */
|
|
/* PB22 */ { 0, 0, 0, 0, 0, 0 }, /* PB22 */
|
|
/* PB21 */ { 0, 0, 0, 0, 0, 0 }, /* PB21 */
|
|
/* PB20 */ { 0, 0, 0, 0, 0, 0 }, /* PB20 */
|
|
/* PB19 */ { 0, 0, 0, 0, 0, 0 }, /* PB19 */
|
|
/* PB18 */ { 0, 0, 0, 0, 0, 0 }, /* PB18 */
|
|
/* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB15 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
|
|
/* PB14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 RxD */
|
|
/* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB12 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */
|
|
/* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB8 */ { 1, 1, 1, 1, 0, 0 }, /* SCC3 TxD */
|
|
/* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
|
|
},
|
|
|
|
/* Port C */
|
|
{ /* conf ppar psor pdir podr pdat */
|
|
/* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
|
|
/* PC30 */ { 1, 1, 1, 1, 0, 0 }, /* Timer1 OUT */
|
|
/* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */
|
|
/* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
|
|
/* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */
|
|
/* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
|
|
/* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
|
|
/* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
|
|
/* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
|
|
/* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */
|
|
/* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC RxCLK 11 */
|
|
/* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC TxCLK 12 */
|
|
/* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */
|
|
/* PC18 */ { 0, 0, 0, 0, 0, 0 }, /* PC18 */
|
|
/* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */
|
|
/* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */
|
|
/* PC15 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TxD */
|
|
/* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */
|
|
/* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */
|
|
/* PC12 */ { 1, 0, 0, 1, 0, 0 }, /* TX OUTPUT SLEW1 */
|
|
/* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* TX OUTPUT SLEW0 */
|
|
/* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */
|
|
/* PC9 */ { 1, 0, 0, 1, 0, 1 }, /* SPA_TX_EN */
|
|
/* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */
|
|
/* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
|
|
/* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
|
|
/* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
|
|
/* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
|
|
/* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
|
|
/* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
|
|
/* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
|
|
/* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */
|
|
},
|
|
|
|
/* Port D */
|
|
{ /* conf ppar psor pdir podr pdat */
|
|
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RxD */
|
|
/* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */
|
|
/* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */
|
|
/* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */
|
|
/* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */
|
|
/* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */
|
|
/* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */
|
|
/* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */
|
|
/* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */
|
|
/* PD22 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: RXD */
|
|
/* PD21 */ { 1, 1, 0, 1, 0, 0 }, /* SCC4: TXD */
|
|
/* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
|
|
/* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */
|
|
/* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
|
|
/* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */
|
|
/* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */
|
|
#if defined(CONFIG_HARD_I2C)
|
|
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
|
|
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
|
|
#else
|
|
/* PD15 */ { 1, 0, 0, 0, 1, 1 }, /* PD15 */
|
|
/* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* PD14 */
|
|
#endif
|
|
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
|
|
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
|
|
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
|
|
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
|
|
/* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TxD */
|
|
/* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RxD */
|
|
/* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */
|
|
/* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */
|
|
/* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */
|
|
/* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */
|
|
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
|
|
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
|
|
}
|
|
};
|
|
|
|
/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
|
|
*
|
|
* This routine performs standard 8260 initialization sequence
|
|
* and calculates the available memory size. It may be called
|
|
* several times to try different SDRAM configurations on both
|
|
* 60x and local buses.
|
|
*/
|
|
static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
|
|
ulong orx, volatile uchar * base)
|
|
{
|
|
volatile uchar c = 0xff;
|
|
volatile uint *sdmr_ptr;
|
|
volatile uint *orx_ptr;
|
|
ulong maxsize, size;
|
|
int i;
|
|
|
|
/* We must be able to test a location outsize the maximum legal size
|
|
* to find out THAT we are outside; but this address still has to be
|
|
* mapped by the controller. That means, that the initial mapping has
|
|
* to be (at least) twice as large as the maximum expected size.
|
|
*/
|
|
maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
|
|
|
|
sdmr_ptr = &memctl->memc_psdmr;
|
|
orx_ptr = &memctl->memc_or1;
|
|
|
|
*orx_ptr = orx;
|
|
|
|
/*
|
|
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
|
|
*
|
|
* "At system reset, initialization software must set up the
|
|
* programmable parameters in the memory controller banks registers
|
|
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
|
|
* system software should execute the following initialization sequence
|
|
* for each SDRAM device.
|
|
*
|
|
* 1. Issue a PRECHARGE-ALL-BANKS command
|
|
* 2. Issue eight CBR REFRESH commands
|
|
* 3. Issue a MODE-SET command to initialize the mode register
|
|
*
|
|
* The initial commands are executed by setting P/LSDMR[OP] and
|
|
* accessing the SDRAM with a single-byte transaction."
|
|
*
|
|
* The appropriate BRx/ORx registers have already been set when we
|
|
* get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
|
|
*/
|
|
|
|
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
|
|
*base = c;
|
|
|
|
*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
|
|
for (i = 0; i < 8; i++)
|
|
*base = c;
|
|
|
|
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
|
|
*(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
|
|
|
|
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
|
|
*base = c;
|
|
|
|
size = get_ram_size ((long *)base, maxsize);
|
|
*orx_ptr = orx | ~(size - 1);
|
|
|
|
return (size);
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8260_t *memctl = &immap->im_memctl;
|
|
long psize;
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
long sizelittle, sizebig;
|
|
#endif
|
|
|
|
memctl->memc_psrt = CONFIG_SYS_PSRT;
|
|
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
|
|
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
/* 60x SDRAM setup:
|
|
*/
|
|
sizelittle = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
|
|
(uchar *) CONFIG_SYS_SDRAM_BASE);
|
|
sizebig = try_init (memctl, CONFIG_SYS_PSDMR_BIG, CONFIG_SYS_OR1_BIG,
|
|
(uchar *) CONFIG_SYS_SDRAM_BASE);
|
|
if (sizelittle < sizebig) {
|
|
psize = sizebig;
|
|
} else {
|
|
psize = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
|
|
(uchar *) CONFIG_SYS_SDRAM_BASE);
|
|
}
|
|
#endif /* CONFIG_SYS_RAMBOOT */
|
|
|
|
icache_enable ();
|
|
|
|
return (psize);
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts ("Board: MUAS3001\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Early board initalization.
|
|
*/
|
|
int board_early_init_r (void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
|
|
/*
|
|
* update "memory" property in the blob
|
|
*/
|
|
void ft_blob_update (void *blob, bd_t *bd)
|
|
{
|
|
int ret, nodeoffset = 0;
|
|
ulong memory_data[2] = {0};
|
|
ulong flash_data[4] = {0};
|
|
ulong speed = 0;
|
|
|
|
memory_data[0] = cpu_to_be32 (bd->bi_memstart);
|
|
memory_data[1] = cpu_to_be32 (bd->bi_memsize);
|
|
|
|
nodeoffset = fdt_path_offset (blob, "/memory");
|
|
if (nodeoffset >= 0) {
|
|
ret = fdt_setprop (blob, nodeoffset, "reg", memory_data,
|
|
sizeof(memory_data));
|
|
if (ret < 0)
|
|
printf ("ft_blob_update): cannot set /memory/reg "
|
|
"property err:%s\n", fdt_strerror (ret));
|
|
} else {
|
|
/* memory node is required in dts */
|
|
printf ("ft_blob_update(): cannot find /memory node "
|
|
"err:%s\n", fdt_strerror(nodeoffset));
|
|
}
|
|
/* update Flash addr, size */
|
|
flash_data[2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE);
|
|
flash_data[3] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE);
|
|
nodeoffset = fdt_path_offset (blob, "/localbus");
|
|
if (nodeoffset >= 0) {
|
|
ret = fdt_setprop (blob, nodeoffset, "ranges", flash_data,
|
|
sizeof (flash_data));
|
|
if (ret < 0)
|
|
printf ("ft_blob_update): cannot set /localbus/ranges "
|
|
"property err:%s\n", fdt_strerror(ret));
|
|
} else {
|
|
/* memory node is required in dts */
|
|
printf ("ft_blob_update(): cannot find /localbus node "
|
|
"err:%s\n", fdt_strerror (nodeoffset));
|
|
}
|
|
|
|
/* baudrate */
|
|
nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial");
|
|
if (nodeoffset >= 0) {
|
|
speed = cpu_to_be32 (bd->bi_baudrate);
|
|
ret = fdt_setprop (blob, nodeoffset, "current-speed", &speed,
|
|
sizeof (unsigned long));
|
|
if (ret < 0)
|
|
printf ("ft_blob_update): cannot set /soc/cpm/serial/current-speed "
|
|
"property err:%s\n", fdt_strerror (ret));
|
|
} else {
|
|
/* baudrate is required in dts */
|
|
printf ("ft_blob_update(): cannot find /soc/cpm/smc2/current-speed node "
|
|
"err:%s\n", fdt_strerror (nodeoffset));
|
|
}
|
|
}
|
|
|
|
void ft_board_setup (void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup (blob, bd);
|
|
ft_blob_update (blob, bd);
|
|
}
|
|
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
|