mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
6b66d2ee47
If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Because the beaglebone X15 (rev A,B and C), am57xx-evms and am57xx-idks don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
590 lines
12 KiB
Text
590 lines
12 KiB
Text
/*
|
|
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "dra74x.dtsi"
|
|
#include "am57xx-commercial-grade.dtsi"
|
|
#include "dra74x-mmc-iodelay.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
|
|
|
|
aliases {
|
|
rtc0 = &mcp_rtc;
|
|
rtc1 = &tps659038_rtc;
|
|
rtc2 = &rtc;
|
|
display0 = &hdmi0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart3;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x80000000 0x0 0x80000000>;
|
|
};
|
|
|
|
vdd_3v3: fixedregulator-vdd_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_3v3";
|
|
vin-supply = <®en1>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
aic_dvdd: fixedregulator-aic_dvdd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "aic_dvdd_fixed";
|
|
vin-supply = <&vdd_3v3>;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vtt_fixed: fixedregulator-vtt {
|
|
/* TPS51200 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vtt_fixed";
|
|
vin-supply = <&smps3_reg>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led0 {
|
|
label = "beagle-x15:usr0";
|
|
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "off";
|
|
};
|
|
|
|
led1 {
|
|
label = "beagle-x15:usr1";
|
|
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "cpu0";
|
|
default-state = "off";
|
|
};
|
|
|
|
led2 {
|
|
label = "beagle-x15:usr2";
|
|
gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "mmc0";
|
|
default-state = "off";
|
|
};
|
|
|
|
led3 {
|
|
label = "beagle-x15:usr3";
|
|
gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "disk-activity";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
gpio_fan: gpio_fan {
|
|
/* Based on 5v 500mA AFB02505HHB */
|
|
compatible = "gpio-fan";
|
|
gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
|
|
gpio-fan,speed-map = <0 0>,
|
|
<13000 1>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
hdmi0: connector {
|
|
compatible = "hdmi-connector";
|
|
label = "hdmi";
|
|
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&tpd12s015_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpd12s015: encoder {
|
|
compatible = "ti,tpd12s015";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
tpd12s015_in: endpoint {
|
|
remote-endpoint = <&hdmi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
tpd12s015_out: endpoint {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
sound0: sound0 {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "BeagleBoard-X15";
|
|
simple-audio-card,widgets =
|
|
"Line", "Line Out",
|
|
"Line", "Line In";
|
|
simple-audio-card,routing =
|
|
"Line Out", "LLOUT",
|
|
"Line Out", "RLOUT",
|
|
"MIC2L", "Line In",
|
|
"MIC2R", "Line In";
|
|
simple-audio-card,format = "dsp_b";
|
|
simple-audio-card,bitclock-master = <&sound0_master>;
|
|
simple-audio-card,frame-master = <&sound0_master>;
|
|
simple-audio-card,bitclock-inversion;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&mcasp3>;
|
|
};
|
|
|
|
sound0_master: simple-audio-card,codec {
|
|
sound-dai = <&tlv320aic3104>;
|
|
clocks = <&clkout2_clk>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
tps659038: tps659038@58 {
|
|
compatible = "ti,tps659038";
|
|
reg = <0x58>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
|
|
ti,system-power-controller;
|
|
ti,palmas-override-powerhold;
|
|
|
|
tps659038_pmic {
|
|
compatible = "ti,tps659038-pmic";
|
|
|
|
regulators {
|
|
smps12_reg: smps12 {
|
|
/* VDD_MPU */
|
|
regulator-name = "smps12";
|
|
regulator-min-microvolt = < 850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps3_reg: smps3 {
|
|
/* VDD_DDR */
|
|
regulator-name = "smps3";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps45_reg: smps45 {
|
|
/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
|
|
regulator-name = "smps45";
|
|
regulator-min-microvolt = < 850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps6_reg: smps6 {
|
|
/* VDD_CORE */
|
|
regulator-name = "smps6";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* SMPS7 unused */
|
|
|
|
smps8_reg: smps8 {
|
|
/* VDD_1V8 */
|
|
regulator-name = "smps8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* SMPS9 unused */
|
|
|
|
ldo1_reg: ldo1 {
|
|
/* VDD_SD / VDDSHV8 */
|
|
regulator-name = "ldo1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: ldo2 {
|
|
/* VDD_SHV5 */
|
|
regulator-name = "ldo2";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo3_reg: ldo3 {
|
|
/* VDDA_1V8_PHYA */
|
|
regulator-name = "ldo3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo4_reg: ldo4 {
|
|
/* VDDA_1V8_PHYB */
|
|
regulator-name = "ldo4";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo9_reg: ldo9 {
|
|
/* VDD_RTC */
|
|
regulator-name = "ldo9";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldoln_reg: ldoln {
|
|
/* VDDA_1V8_PLL */
|
|
regulator-name = "ldoln";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldousb_reg: ldousb {
|
|
/* VDDA_3V_USB: VDDA_USBHS33 */
|
|
regulator-name = "ldousb";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
regen1: regen1 {
|
|
/* VDD_3V3_ON */
|
|
regulator-name = "regen1";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
tps659038_rtc: tps659038_rtc {
|
|
compatible = "ti,palmas-rtc";
|
|
interrupt-parent = <&tps659038>;
|
|
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
|
wakeup-source;
|
|
};
|
|
|
|
tps659038_pwr_button: tps659038_pwr_button {
|
|
compatible = "ti,palmas-pwrbutton";
|
|
interrupt-parent = <&tps659038>;
|
|
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
|
wakeup-source;
|
|
ti,palmas-long-press-seconds = <12>;
|
|
};
|
|
|
|
tps659038_gpio: tps659038_gpio {
|
|
compatible = "ti,palmas-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
extcon_usb2: tps659038_usb {
|
|
compatible = "ti,palmas-usb-vid";
|
|
ti,enable-vbus-detection;
|
|
vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
};
|
|
|
|
tmp102: tmp102@48 {
|
|
compatible = "ti,tmp102";
|
|
reg = <0x48>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
tlv320aic3104: tlv320aic3104@18 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "ti,tlv320aic3104";
|
|
reg = <0x18>;
|
|
assigned-clocks = <&clkoutmux2_clk_mux>;
|
|
assigned-clock-parents = <&sys_clk2_dclk_div>;
|
|
|
|
status = "okay";
|
|
adc-settle-ms = <40>;
|
|
|
|
AVDD-supply = <&vdd_3v3>;
|
|
IOVDD-supply = <&vdd_3v3>;
|
|
DRVDD-supply = <&vdd_3v3>;
|
|
DVDD-supply = <&aic_dvdd>;
|
|
};
|
|
|
|
eeprom: eeprom@50 {
|
|
compatible = "atmel,24c32";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
mcp_rtc: rtc@6f {
|
|
compatible = "microchip,mcp7941x";
|
|
reg = <0x6f>;
|
|
interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&dra7_pmx_core 0x424>;
|
|
interrupt-names = "irq", "wakeup";
|
|
|
|
vcc-supply = <&vdd_3v3>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&gpio7 {
|
|
ti,no-reset-on-init;
|
|
ti,no-idle-on-init;
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&smps12_reg>;
|
|
voltage-tolerance = <1>;
|
|
};
|
|
|
|
&uart3 {
|
|
status = "okay";
|
|
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&dra7_pmx_core 0x3f8>;
|
|
};
|
|
|
|
&davinci_mdio {
|
|
phy0: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
phy1: ethernet-phy@2 {
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
&mac {
|
|
status = "okay";
|
|
dual_emac;
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rgmii";
|
|
dual_emac_res_vlan = <1>;
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy-handle = <&phy1>;
|
|
phy-mode = "rgmii";
|
|
dual_emac_res_vlan = <2>;
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins_default>;
|
|
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
|
|
no-1-8-v;
|
|
};
|
|
|
|
&mmc2 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins_default>;
|
|
|
|
vmmc-supply = <&vdd_3v3>;
|
|
bus-width = <8>;
|
|
ti,non-removable;
|
|
cap-mmc-dual-data-rate;
|
|
};
|
|
|
|
&sata {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_phy1 {
|
|
phy-supply = <&ldousb_reg>;
|
|
};
|
|
|
|
&usb2_phy2 {
|
|
phy-supply = <&ldousb_reg>;
|
|
};
|
|
|
|
&usb1 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&omap_dwc3_2 {
|
|
extcon = <&extcon_usb2>;
|
|
};
|
|
|
|
&usb2 {
|
|
/*
|
|
* Stand alone usage is peripheral only.
|
|
* However, with some resistor modifications
|
|
* this port can be used via expansion connectors
|
|
* as "host" or "dual-role". If so, provide
|
|
* the necessary dr_mode override in the expansion
|
|
* board's DT.
|
|
*/
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&cpu_trips {
|
|
cpu_alert1: cpu_alert1 {
|
|
temperature = <50000>; /* millicelsius */
|
|
hysteresis = <2000>; /* millicelsius */
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
&cpu_cooling_maps {
|
|
map1 {
|
|
trip = <&cpu_alert1>;
|
|
cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
&thermal_zones {
|
|
board_thermal: board_thermal {
|
|
polling-delay-passive = <1250>; /* milliseconds */
|
|
polling-delay = <1500>; /* milliseconds */
|
|
|
|
/* sensor ID */
|
|
thermal-sensors = <&tmp102 0>;
|
|
|
|
board_trips: trips {
|
|
board_alert0: board_alert {
|
|
temperature = <40000>; /* millicelsius */
|
|
hysteresis = <2000>; /* millicelsius */
|
|
type = "active";
|
|
};
|
|
|
|
board_crit: board_crit {
|
|
temperature = <105000>; /* millicelsius */
|
|
hysteresis = <0>; /* millicelsius */
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
board_cooling_maps: cooling-maps {
|
|
map0 {
|
|
trip = <&board_alert0>;
|
|
cooling-device =
|
|
<&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dss {
|
|
status = "ok";
|
|
|
|
vdda_video-supply = <&ldoln_reg>;
|
|
};
|
|
|
|
&hdmi {
|
|
status = "ok";
|
|
vdda-supply = <&ldo4_reg>;
|
|
|
|
port {
|
|
hdmi_out: endpoint {
|
|
remote-endpoint = <&tpd12s015_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie1_rc {
|
|
status = "ok";
|
|
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&pcie1_ep {
|
|
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&mcasp3 {
|
|
#sound-dai-cells = <0>;
|
|
assigned-clocks = <&mcasp3_ahclkx_mux>;
|
|
assigned-clock-parents = <&sys_clkin2>;
|
|
status = "okay";
|
|
|
|
op-mode = <0>; /* MCASP_IIS_MODE */
|
|
tdm-slots = <2>;
|
|
/* 4 serializers */
|
|
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
|
1 2 0 0
|
|
>;
|
|
tx-num-evt = <32>;
|
|
rx-num-evt = <32>;
|
|
};
|
|
|
|
&mailbox5 {
|
|
status = "okay";
|
|
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
|
|
status = "okay";
|
|
};
|
|
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&mailbox6 {
|
|
status = "okay";
|
|
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
|
|
status = "okay";
|
|
};
|
|
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
|
|
status = "okay";
|
|
};
|
|
};
|