mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
393cb36199
As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15 based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15 based SoC's will be sub-classified as Exynos4 and Exynos5 respectively. In order to better adapt and reuse code across various upcoming Samsung Exynos based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix are renamed as exynos4/EXYNOS4. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
421 lines
8.7 KiB
ArmAsm
421 lines
8.7 KiB
ArmAsm
/*
|
|
* Memory setup for ORIGEN board based on EXYNOS4210
|
|
*
|
|
* Copyright (C) 2011 Samsung Electronics
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include "origen_setup.h"
|
|
#define SET_MIU
|
|
|
|
.globl mem_ctrl_asm_init
|
|
mem_ctrl_asm_init:
|
|
/*
|
|
* Async bridge configuration at CPU_core:
|
|
* 1: half_sync
|
|
* 0: full_sync
|
|
*/
|
|
ldr r0, =ASYNC_CONFIG
|
|
mov r1, #1
|
|
str r1, [r0]
|
|
|
|
#ifdef SET_MIU
|
|
ldr r0, =EXYNOS4_MIU_BASE
|
|
/* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
|
|
ldr r1, =0x20001507
|
|
str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
|
|
|
|
/* Update MIU Configuration */
|
|
ldr r1, =0x00000001
|
|
str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
|
|
#endif
|
|
/* DREX0 */
|
|
ldr r0, =EXYNOS4_DMC0_BASE
|
|
|
|
/*
|
|
* DLL Parameter Setting:
|
|
* Termination: Enable R/W
|
|
* Phase Delay for DQS Cleaning: 180' Shift
|
|
*/
|
|
ldr r1, =0xe0000086
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
|
|
/*
|
|
* ZQ Calibration
|
|
* Termination: Disable
|
|
* Auto Calibration Start: Enable
|
|
*/
|
|
ldr r1, =0xE3855703
|
|
str r1, [r0, #DMC_PHYZQCONTROL]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
1: subs r2, r2, #1
|
|
bne 1b
|
|
|
|
/*
|
|
* Update DLL Information:
|
|
* Force DLL Resyncronization
|
|
*/
|
|
ldr r1, =0xe000008e
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
|
|
/* Reset Force DLL Resyncronization */
|
|
ldr r1, =0xe0000086
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
|
|
/* Enable Differential DQS, DLL Off*/
|
|
ldr r1, =0x71101008
|
|
str r1, [r0, #DMC_PHYCONTROL0]
|
|
|
|
/* Activate PHY DLL: DLL On */
|
|
ldr r1, =0x7110100A
|
|
str r1, [r0, #DMC_PHYCONTROL0]
|
|
|
|
/* Set DLL Parameters */
|
|
ldr r1, =0xe0000086
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
|
|
/* DLL Start */
|
|
ldr r1, =0x7110100B
|
|
str r1, [r0, #DMC_PHYCONTROL0]
|
|
|
|
ldr r1, =0x00000000
|
|
str r1, [r0, #DMC_PHYCONTROL2]
|
|
|
|
/* Set Clock Ratio of Bus clock to Memory Clock */
|
|
ldr r1, =0x0FFF301a
|
|
str r1, [r0, #DMC_CONCONTROL]
|
|
|
|
/*
|
|
* Memor Burst length: 8
|
|
* Number of chips: 2
|
|
* Memory Bus width: 32 bit
|
|
* Memory Type: DDR3
|
|
* Additional Latancy for PLL: 1 Cycle
|
|
*/
|
|
ldr r1, =0x00312640
|
|
str r1, [r0, #DMC_MEMCONTROL]
|
|
|
|
/*
|
|
* Memory Configuration Chip 0
|
|
* Address Mapping: Interleaved
|
|
* Number of Column address Bits: 10 bits
|
|
* Number of Rows Address Bits: 14
|
|
* Number of Banks: 8
|
|
*/
|
|
ldr r1, =0x20e01323
|
|
str r1, [r0, #DMC_MEMCONFIG0]
|
|
|
|
/*
|
|
* Memory Configuration Chip 1
|
|
* Address Mapping: Interleaved
|
|
* Number of Column address Bits: 10 bits
|
|
* Number of Rows Address Bits: 14
|
|
* Number of Banks: 8
|
|
*/
|
|
ldr r1, =0x40e01323
|
|
str r1, [r0, #DMC_MEMCONFIG1]
|
|
|
|
/* Config Precharge Policy */
|
|
ldr r1, =0xff000000
|
|
str r1, [r0, #DMC_PRECHCONFIG]
|
|
|
|
/*
|
|
* TimingAref, TimingRow, TimingData, TimingPower Setting:
|
|
* Values as per Memory AC Parameters
|
|
*/
|
|
ldr r1, =0x000000BB
|
|
str r1, [r0, #DMC_TIMINGAREF]
|
|
ldr r1, =0x4046654f
|
|
str r1, [r0, #DMC_TIMINGROW]
|
|
ldr r1, =0x46400506
|
|
str r1, [r0, #DMC_TIMINGDATA]
|
|
ldr r1, =0x52000A3C
|
|
str r1, [r0, #DMC_TIMINGPOWER]
|
|
|
|
/* Chip0: NOP Command: Assert and Hold CKE to high level */
|
|
ldr r1, =0x07000000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
2: subs r2, r2, #1
|
|
bne 2b
|
|
|
|
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
|
|
ldr r1, =0x00020000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00030000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00010002
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00000328
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
3: subs r2, r2, #1
|
|
bne 3b
|
|
|
|
/* Chip0: ZQINIT */
|
|
ldr r1, =0x0a000000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
4: subs r2, r2, #1
|
|
bne 4b
|
|
|
|
/* Chip1: NOP Command: Assert and Hold CKE to high level */
|
|
ldr r1, =0x07100000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
5: subs r2, r2, #1
|
|
bne 5b
|
|
|
|
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
|
|
ldr r1, =0x00120000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00130000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00110002
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00100328
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
6: subs r2, r2, #1
|
|
bne 6b
|
|
|
|
/* Chip1: ZQINIT */
|
|
ldr r1, =0x0a100000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
7: subs r2, r2, #1
|
|
bne 7b
|
|
|
|
ldr r1, =0xe000008e
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
ldr r1, =0xe0000086
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
8: subs r2, r2, #1
|
|
bne 8b
|
|
|
|
/* DREX1 */
|
|
ldr r0, =EXYNOS4_DMC1_BASE @0x10410000
|
|
|
|
/*
|
|
* DLL Parameter Setting:
|
|
* Termination: Enable R/W
|
|
* Phase Delay for DQS Cleaning: 180' Shift
|
|
*/
|
|
ldr r1, =0xe0000086
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
|
|
/*
|
|
* ZQ Calibration:
|
|
* Termination: Disable
|
|
* Auto Calibration Start: Enable
|
|
*/
|
|
ldr r1, =0xE3855703
|
|
str r1, [r0, #DMC_PHYZQCONTROL]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
1: subs r2, r2, #1
|
|
bne 1b
|
|
|
|
/*
|
|
* Update DLL Information:
|
|
* Force DLL Resyncronization
|
|
*/
|
|
ldr r1, =0xe000008e
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
|
|
/* Reset Force DLL Resyncronization */
|
|
ldr r1, =0xe0000086
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
|
|
/* Enable Differential DQS, DLL Off*/
|
|
ldr r1, =0x71101008
|
|
str r1, [r0, #DMC_PHYCONTROL0]
|
|
|
|
/* Activate PHY DLL: DLL On */
|
|
ldr r1, =0x7110100A
|
|
str r1, [r0, #DMC_PHYCONTROL0]
|
|
|
|
/* Set DLL Parameters */
|
|
ldr r1, =0xe0000086
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
|
|
/* DLL Start */
|
|
ldr r1, =0x7110100B
|
|
str r1, [r0, #DMC_PHYCONTROL0]
|
|
|
|
ldr r1, =0x00000000
|
|
str r1, [r0, #DMC_PHYCONTROL2]
|
|
|
|
/* Set Clock Ratio of Bus clock to Memory Clock */
|
|
ldr r1, =0x0FFF301a
|
|
str r1, [r0, #DMC_CONCONTROL]
|
|
|
|
/*
|
|
* Memor Burst length: 8
|
|
* Number of chips: 2
|
|
* Memory Bus width: 32 bit
|
|
* Memory Type: DDR3
|
|
* Additional Latancy for PLL: 1 Cycle
|
|
*/
|
|
ldr r1, =0x00312640
|
|
str r1, [r0, #DMC_MEMCONTROL]
|
|
|
|
/*
|
|
* Memory Configuration Chip 0
|
|
* Address Mapping: Interleaved
|
|
* Number of Column address Bits: 10 bits
|
|
* Number of Rows Address Bits: 14
|
|
* Number of Banks: 8
|
|
*/
|
|
ldr r1, =0x20e01323
|
|
str r1, [r0, #DMC_MEMCONFIG0]
|
|
|
|
/*
|
|
* Memory Configuration Chip 1
|
|
* Address Mapping: Interleaved
|
|
* Number of Column address Bits: 10 bits
|
|
* Number of Rows Address Bits: 14
|
|
* Number of Banks: 8
|
|
*/
|
|
ldr r1, =0x40e01323
|
|
str r1, [r0, #DMC_MEMCONFIG1]
|
|
|
|
/* Config Precharge Policy */
|
|
ldr r1, =0xff000000
|
|
str r1, [r0, #DMC_PRECHCONFIG]
|
|
|
|
/*
|
|
* TimingAref, TimingRow, TimingData, TimingPower Setting:
|
|
* Values as per Memory AC Parameters
|
|
*/
|
|
ldr r1, =0x000000BB
|
|
str r1, [r0, #DMC_TIMINGAREF]
|
|
ldr r1, =0x4046654f
|
|
str r1, [r0, #DMC_TIMINGROW]
|
|
ldr r1, =0x46400506
|
|
str r1, [r0, #DMC_TIMINGDATA]
|
|
ldr r1, =0x52000A3C
|
|
str r1, [r0, #DMC_TIMINGPOWER]
|
|
|
|
/* Chip0: NOP Command: Assert and Hold CKE to high level */
|
|
ldr r1, =0x07000000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
2: subs r2, r2, #1
|
|
bne 2b
|
|
|
|
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
|
|
ldr r1, =0x00020000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00030000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00010002
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00000328
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
3: subs r2, r2, #1
|
|
bne 3b
|
|
|
|
/* Chip 0: ZQINIT */
|
|
ldr r1, =0x0a000000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
4: subs r2, r2, #1
|
|
bne 4b
|
|
|
|
/* Chip1: NOP Command: Assert and Hold CKE to high level */
|
|
ldr r1, =0x07100000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
5: subs r2, r2, #1
|
|
bne 5b
|
|
|
|
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
|
|
ldr r1, =0x00120000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00130000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00110002
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
ldr r1, =0x00100328
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
6: subs r2, r2, #1
|
|
bne 6b
|
|
|
|
/* Chip1: ZQINIT */
|
|
ldr r1, =0x0a100000
|
|
str r1, [r0, #DMC_DIRECTCMD]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
7: subs r2, r2, #1
|
|
bne 7b
|
|
|
|
ldr r1, =0xe000008e
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
ldr r1, =0xe0000086
|
|
str r1, [r0, #DMC_PHYCONTROL1]
|
|
|
|
/* Wait ?us*/
|
|
mov r2, #0x100000
|
|
8: subs r2, r2, #1
|
|
bne 8b
|
|
|
|
/* turn on DREX0, DREX1 */
|
|
ldr r0, =EXYNOS4_DMC0_BASE
|
|
ldr r1, =0x0FFF303a
|
|
str r1, [r0, #DMC_CONCONTROL]
|
|
|
|
ldr r0, =EXYNOS4_DMC1_BASE
|
|
ldr r1, =0x0FFF303a
|
|
str r1, [r0, #DMC_CONCONTROL]
|
|
|
|
mov pc, lr
|