2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-20 18:23:08 +00:00
u-boot/arch/arm/dts/meson-gxbb.dtsi
Neil Armstrong ee73135365 ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
Synced from Linux commit 3650b228f83a ("Linux 5.10-rc1")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00

856 lines
16 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andreas Färber
*/
#include "meson-gx.dtsi"
#include "meson-gx-mali450.dtsi"
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/reset/gxbb-aoclkc.h>
/ {
compatible = "amlogic,meson-gxbb";
soc {
usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000000 0x0 0x20>;
resets = <&reset RESET_USB_OTG>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
clock-names = "usb_general", "usb";
status = "disabled";
};
usb1_phy: phy@c0000020 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000020 0x0 0x20>;
resets = <&reset RESET_USB_OTG>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
clock-names = "usb_general", "usb";
status = "disabled";
};
usb0: usb@c9000000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9000000 0x0 0x40000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
clock-names = "otg";
phys = <&usb0_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
usb1: usb@c9100000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9100000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "otg";
phys = <&usb1_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
};
};
&aiu {
compatible = "amlogic,aiu-gxbb", "amlogic,aiu";
clocks = <&clkc CLKID_AIU_GLUE>,
<&clkc CLKID_I2S_OUT>,
<&clkc CLKID_AOCLK_GATE>,
<&clkc CLKID_CTS_AMCLK>,
<&clkc CLKID_MIXER_IFACE>,
<&clkc CLKID_IEC958>,
<&clkc CLKID_IEC958_GATE>,
<&clkc CLKID_CTS_MCLK_I958>,
<&clkc CLKID_CTS_I958>;
clock-names = "pclk",
"i2s_pclk",
"i2s_aoclk",
"i2s_mclk",
"i2s_mixer",
"spdif_pclk",
"spdif_aoclk",
"spdif_mclk",
"spdif_mclk_sel";
resets = <&reset RESET_AIU>;
};
&aobus {
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
<0x0 0x0002c 0x0 0x4>,
<0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_aobus 0 0 14>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
bias-disable;
};
};
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
bias-disable;
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
bias-disable;
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
bias-disable;
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
bias-disable;
};
};
i2c_ao_pins: i2c_ao {
mux {
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
bias-disable;
};
};
pwm_ao_a_3_pins: pwm_ao_a_3 {
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a_3";
bias-disable;
};
};
pwm_ao_a_6_pins: pwm_ao_a_6 {
mux {
groups = "pwm_ao_a_6";
function = "pwm_ao_a_6";
bias-disable;
};
};
pwm_ao_a_12_pins: pwm_ao_a_12 {
mux {
groups = "pwm_ao_a_12";
function = "pwm_ao_a_12";
bias-disable;
};
};
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
bias-disable;
};
};
i2s_am_clk_pins: i2s_am_clk {
mux {
groups = "i2s_am_clk";
function = "i2s_out_ao";
bias-disable;
};
};
i2s_out_ao_clk_pins: i2s_out_ao_clk {
mux {
groups = "i2s_out_ao_clk";
function = "i2s_out_ao";
bias-disable;
};
};
i2s_out_lr_clk_pins: i2s_out_lr_clk {
mux {
groups = "i2s_out_lr_clk";
function = "i2s_out_ao";
bias-disable;
};
};
i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
mux {
groups = "i2s_out_ch01_ao";
function = "i2s_out_ao";
bias-disable;
};
};
i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
mux {
groups = "i2s_out_ch23_ao";
function = "i2s_out_ao";
bias-disable;
};
};
i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
mux {
groups = "i2s_out_ch45_ao";
function = "i2s_out_ao";
bias-disable;
};
};
spdif_out_ao_6_pins: spdif_out_ao_6 {
mux {
groups = "spdif_out_ao_6";
function = "spdif_out_ao";
};
};
spdif_out_ao_13_pins: spdif_out_ao_13 {
mux {
groups = "spdif_out_ao_13";
function = "spdif_out_ao";
bias-disable;
};
};
ao_cec_pins: ao_cec {
mux {
groups = "ao_cec";
function = "cec_ao";
bias-disable;
};
};
ee_cec_pins: ee_cec {
mux {
groups = "ee_cec";
function = "cec_ao";
bias-disable;
};
};
};
};
&cbus {
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clkc CLKID_SPI>;
status = "disabled";
};
};
&cec_AO {
clocks = <&clkc_AO CLKID_AO_CEC_32K>;
clock-names = "core";
};
&clkc_AO {
compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
clocks = <&xtal>, <&clkc CLKID_CLK81>;
clock-names = "xtal", "mpeg-clk";
};
&efuse {
clocks = <&clkc CLKID_EFUSE>;
};
&ethmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
};
&gpio_intc {
compatible = "amlogic,meson-gpio-intc",
"amlogic,meson-gxbb-gpio-intc";
status = "okay";
};
&hdmi_tx {
compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
resets = <&reset RESET_HDMITX_CAPB3>,
<&reset RESET_HDMI_SYSTEM_RESET>,
<&reset RESET_HDMI_TX>;
reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
clocks = <&clkc CLKID_HDMI_PCLK>,
<&clkc CLKID_CLK81>,
<&clkc CLKID_GCLK_VENCI_INT0>;
clock-names = "isfr", "iahb", "venci";
};
&sysctrl {
clkc: clock-controller {
compatible = "amlogic,gxbb-clkc";
#clock-cells = <1>;
clocks = <&xtal>;
clock-names = "xtal";
};
};
&hwrng {
clocks = <&clkc CLKID_RNG0>;
clock-names = "core";
};
&i2c_A {
clocks = <&clkc CLKID_I2C>;
};
&i2c_AO {
clocks = <&clkc CLKID_AO_I2C>;
};
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
&i2c_C {
clocks = <&clkc CLKID_I2C>;
};
&mali {
compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
clock-names = "bus", "core";
assigned-clocks = <&clkc CLKID_GP0_PLL>;
assigned-clock-rates = <744000000>;
};
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
<0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_periphs 0 0 119>;
};
emmc_pins: emmc {
mux-0 {
groups = "emmc_nand_d07",
"emmc_cmd";
function = "emmc";
bias-pull-up;
};
mux-1 {
groups = "emmc_clk";
function = "emmc";
bias-disable;
};
};
emmc_ds_pins: emmc-ds {
mux {
groups = "emmc_ds";
function = "emmc";
bias-pull-down;
};
};
emmc_clk_gate_pins: emmc_clk_gate {
mux {
groups = "BOOT_8";
function = "gpio_periphs";
bias-pull-down;
};
};
nor_pins: nor {
mux {
groups = "nor_d",
"nor_q",
"nor_c",
"nor_cs";
function = "nor";
bias-disable;
};
};
spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
"spi_sclk";
function = "spi";
bias-disable;
};
};
spi_ss0_pins: spi-ss0 {
mux {
groups = "spi_ss0";
function = "spi";
bias-disable;
};
};
sdcard_pins: sdcard {
mux-0 {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
"sdcard_cmd";
function = "sdcard";
bias-pull-up;
};
mux-1 {
groups = "sdcard_clk";
function = "sdcard";
bias-disable;
};
};
sdcard_clk_gate_pins: sdcard_clk_gate {
mux {
groups = "CARD_2";
function = "gpio_periphs";
bias-pull-down;
};
};
sdio_pins: sdio {
mux-0 {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd";
function = "sdio";
bias-pull-up;
};
mux-1 {
groups = "sdio_clk";
function = "sdio";
bias-disable;
};
};
sdio_clk_gate_pins: sdio_clk_gate {
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
bias-pull-down;
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
function = "sdio";
bias-disable;
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
bias-disable;
};
};
uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
bias-disable;
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
bias-disable;
};
};
uart_b_cts_rts_pins: uart_b_cts_rts {
mux {
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
bias-disable;
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
bias-disable;
};
};
uart_c_cts_rts_pins: uart_c_cts_rts {
mux {
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
bias-disable;
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
bias-disable;
};
};
i2c_b_pins: i2c_b {
mux {
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
bias-disable;
};
};
i2c_c_pins: i2c_c {
mux {
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
bias-disable;
};
};
eth_rgmii_pins: eth-rgmii {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_rxd2",
"eth_rxd3",
"eth_rgmii_tx_clk",
"eth_tx_en",
"eth_txd0",
"eth_txd1",
"eth_txd2",
"eth_txd3";
function = "eth";
bias-disable;
};
};
eth_rmii_pins: eth-rmii {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_tx_en",
"eth_txd0",
"eth_txd1";
function = "eth";
bias-disable;
};
};
pwm_a_x_pins: pwm_a_x {
mux {
groups = "pwm_a_x";
function = "pwm_a_x";
bias-disable;
};
};
pwm_a_y_pins: pwm_a_y {
mux {
groups = "pwm_a_y";
function = "pwm_a_y";
bias-disable;
};
};
pwm_b_pins: pwm_b {
mux {
groups = "pwm_b";
function = "pwm_b";
bias-disable;
};
};
pwm_d_pins: pwm_d {
mux {
groups = "pwm_d";
function = "pwm_d";
bias-disable;
};
};
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
function = "pwm_e";
bias-disable;
};
};
pwm_f_x_pins: pwm_f_x {
mux {
groups = "pwm_f_x";
function = "pwm_f_x";
bias-disable;
};
};
pwm_f_y_pins: pwm_f_y {
mux {
groups = "pwm_f_y";
function = "pwm_f_y";
bias-disable;
};
};
hdmi_hpd_pins: hdmi_hpd {
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
bias-disable;
};
};
hdmi_i2c_pins: hdmi_i2c {
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
bias-disable;
};
};
i2sout_ch23_y_pins: i2sout_ch23_y {
mux {
groups = "i2sout_ch23_y";
function = "i2s_out";
bias-disable;
};
};
i2sout_ch45_y_pins: i2sout_ch45_y {
mux {
groups = "i2sout_ch45_y";
function = "i2s_out";
bias-disable;
};
};
i2sout_ch67_y_pins: i2sout_ch67_y {
mux {
groups = "i2sout_ch67_y";
function = "i2s_out";
bias-disable;
};
};
spdif_out_y_pins: spdif_out_y {
mux {
groups = "spdif_out_y";
function = "spdif_out";
bias-disable;
};
};
};
};
&pwrc {
resets = <&reset RESET_VIU>,
<&reset RESET_VENC>,
<&reset RESET_VCBUS>,
<&reset RESET_BT656>,
<&reset RESET_DVIN_RESET>,
<&reset RESET_RDMA>,
<&reset RESET_VENCI>,
<&reset RESET_VENCP>,
<&reset RESET_VDAC>,
<&reset RESET_VDI6>,
<&reset RESET_VENCL>,
<&reset RESET_VID_LOCK>;
reset-names = "viu", "venc", "vcbus", "bt656",
"dvin", "rdma", "venci", "vencp",
"vdac", "vdi6", "vencl", "vid_lock";
clocks = <&clkc CLKID_VPU>,
<&clkc CLKID_VAPB>;
clock-names = "vpu", "vapb";
/*
* VPU clocking is provided by two identical clock paths
* VPU_0 and VPU_1 muxed to a single clock by a glitch
* free mux to safely change frequency while running.
* Same for VAPB but with a final gate after the glitch free mux.
*/
assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
<&clkc CLKID_VPU_0>,
<&clkc CLKID_VPU>, /* Glitch free mux */
<&clkc CLKID_VAPB_0_SEL>,
<&clkc CLKID_VAPB_0>,
<&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
<0>, /* Do Nothing */
<&clkc CLKID_VPU_0>,
<&clkc CLKID_FCLK_DIV4>,
<0>, /* Do Nothing */
<&clkc CLKID_VAPB_0>;
assigned-clock-rates = <0>, /* Do Nothing */
<666666666>,
<0>, /* Do Nothing */
<0>, /* Do Nothing */
<250000000>,
<0>; /* Do Nothing */
};
&saradc {
compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
<&clkc CLKID_SAR_ADC>,
<&clkc CLKID_SAR_ADC_CLK>,
<&clkc CLKID_SAR_ADC_SEL>;
clock-names = "clkin", "core", "adc_clk", "adc_sel";
};
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&clkc CLKID_SD_EMMC_A_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
resets = <&reset RESET_SD_EMMC_A>;
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
resets = <&reset RESET_SD_EMMC_B>;
};
&sd_emmc_c {
clocks = <&clkc CLKID_SD_EMMC_C>,
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
resets = <&reset RESET_SD_EMMC_C>;
};
&simplefb_hdmi {
clocks = <&clkc CLKID_HDMI_PCLK>,
<&clkc CLKID_CLK81>,
<&clkc CLKID_GCLK_VENCI_INT0>;
};
&spicc {
clocks = <&clkc CLKID_SPICC>;
clock-names = "core";
resets = <&reset RESET_PERIPHS_SPICC>;
num-cs = <1>;
};
&spifc {
clocks = <&clkc CLKID_SPI>;
};
&uart_A {
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO {
clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO_B {
clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_B {
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_C {
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
};
&vdec {
compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
clocks = <&clkc CLKID_DOS_PARSER>,
<&clkc CLKID_DOS>,
<&clkc CLKID_VDEC_1>,
<&clkc CLKID_VDEC_HEVC>;
clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
resets = <&reset RESET_PARSER>;
reset-names = "esparser";
};