Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-03 18:10:13 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/rk3566-quartz64-a.dts
Jonas Karlman 9c1b5d163e board: rockchip: Add Pine64 Quartz64-A Board 
The Pine64 Quartz64 Model A is a single-board computer based on the
Rockchip RK3566 SoC. The board features USB3, SATA, PCIe, HDMI, USB2.0,
CSI, DSI, eDP, eMMC, SD, and an e-paper parallel port, as well as a
20 pin GPIO header.

Features tested on a Quartz64-A 8GB v2.0 2021-04-27:
- SD-card boot
- eMMC boot
- PCIe/NVMe/AHCI
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:35 +08:00

839 lines
17 KiB
Text
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3566.dtsi"
/ {
model = "Pine64 RK3566 Quartz64-A Board";
compatible = "pine64,quartz64-a", "rockchip,rk3566";
aliases {
ethernet0 = &gmac1;
mmc0 = &sdmmc0;
mmc1 = &sdhci;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
gmac1_clkin: external-gmac1-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac1_clkin";
#clock-cells = <0>;
};
fan: gpio_fan {
compatible = "gpio-fan";
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
4500 1>;
pinctrl-names = "default";
pinctrl-0 = <&fan_en_h>;
#cooling-cells = <2>;
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
led-work {
label = "work-led";
default-state = "off";
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&work_led_enable_h>;
retain-state-suspended;
};
led-diy {
label = "diy-led";
default-state = "on";
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
pinctrl-names = "default";
pinctrl-0 = <&diy_led_enable_h>;
retain-state-suspended;
};
};
rk817-sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,name = "Analog RK817";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,cpu {
sound-dai = <&i2s1_8ch>;
};
simple-audio-card,codec {
sound-dai = <&rk817>;
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk817 1>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
post-power-on-delay-ms = <100>;
power-off-delay-us = <5000000>;
reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
};
spdif_dit: spdif-dit {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
};
spdif_sound: spdif-sound {
compatible = "simple-audio-card";
simple-audio-card,name = "SPDIF";
simple-audio-card,cpu {
sound-dai = <&spdif>;
};
simple-audio-card,codec {
sound-dai = <&spdif_dit>;
};
};
vcc12v_dcin: vcc12v_dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
/* vbus feeds the rk817 usb input.
* With no battery attached, also feeds vcc_bat+
* via ON/OFF_BAT jumper
*/
vbus: vbus {
compatible = "regulator-fixed";
regulator-name = "vbus";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_enable_h>;
regulator-name = "vcc3v3_pcie_p";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3>;
};
vcc5v0_usb: vcc5v0_usb {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
/* all four ports are controlled by one gpio
* the host ports are sourced from vcc5v0_usb
* the otg port is sourced from vcc5v0_midu
*/
vcc5v0_usb20_host: vcc5v0_usb20_host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb20_host_en>;
regulator-name = "vcc5v0_usb20_host";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_usb20_otg: vcc5v0_usb20_otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc5v0_usb20_otg";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dcdc_boost>;
};
vcc3v3_sd: vcc3v3_sd {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&vcc_sd_h>;
regulator-boot-on;
regulator-name = "vcc3v3_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3>;
};
/* sourced from vbus and vcc_bat+ via rk817 sw5 */
vcc_sys: vcc_sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4400000>;
regulator-max-microvolt = <4400000>;
vin-supply = <&vbus>;
};
/* sourced from vcc_sys, sdio module operates internally at 3.3v */
vcc_wl: vcc_wl {
compatible = "regulator-fixed";
regulator-name = "vcc_wl";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_sys>;
};
};
&combphy1 {
status = "okay";
};
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&cpu_thermal {
trips {
cpu_hot: cpu_hot {
temperature = <55000>;
hysteresis = <2000>;
type = "active";
};
};
cooling-maps {
map1 {
trip = <&cpu_hot>;
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
&gmac1 {
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
clock_in_out = "input";
phy-supply = <&vcc_3v3>;
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&gmac1m0_miim
&gmac1m0_tx_bus2
&gmac1m0_rx_bus2
&gmac1m0_rgmii_clk
&gmac1m0_clkinout
&gmac1m0_rgmii_bus>;
snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
tx_delay = <0x30>;
rx_delay = <0x10>;
phy-handle = <&rgmii_phy1>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda_0v9>;
avdd-1v8-supply = <&vcc_1v8>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-ramp-delay = <2300>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rk817: pmic@20 {
compatible = "rockchip,rk817";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
clock-names = "mclk";
clocks = <&cru I2S1_MCLKOUT_TX>;
clock-output-names = "rk808-clkout1", "rk808-clkout2";
#clock-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
rockchip,system-power-controller;
#sound-dai-cells = <0>;
wakeup-source;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc5-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_sys>;
vcc9-supply = <&dcdc_boost>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_logic";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_gpu";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_3v3: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_3v3";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdda_0v9: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda_0v9";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_acodec";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_1v8: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_dvp: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc1v8_dvp";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc2v8_dvp: LDO_REG9 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vcc2v8_dvp";
regulator-state-mem {
regulator-off-in-suspend;
};
};
dcdc_boost: BOOST {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "boost";
regulator-state-mem {
regulator-off-in-suspend;
};
};
otg_switch: OTG_SWITCH {
regulator-name = "otg_switch";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
/* i2c3 is exposed on con40
* pin 3 - i2c3_sda_m0, pullup to vcc_3v3
* pin 5 - i2c3_scl_m0, pullup to vcc_3v3
*/
&i2c3 {
status = "okay";
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_sclktx
&i2s1m0_lrcktx
&i2s1m0_sdi0
&i2s1m0_sdo0>;
rockchip,trcm-sync-tx-only;
status = "okay";
};
&mdio1 {
rgmii_phy1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&pcie2x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_h>;
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie_p>;
status = "okay";
};
&pinctrl {
bt {
bt_enable_h: bt-enable-h {
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_host_wake_l: bt-host-wake-l {
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
};
bt_wake_l: bt-wake-l {
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
fan {
fan_en_h: fan-en-h {
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
work_led_enable_h: work-led-enable-h {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
diy_led_enable_h: diy-led-enable-h {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie_enable_h: pcie-enable-h {
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie_reset_h: pcie-reset-h {
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb2 {
vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
vcc_sd {
vcc_sd_h: vcc-sd-h {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio2-supply = <&vcc_1v8>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc1v8_dvp>;
vccio7-supply = <&vcc_3v3>;
status = "okay";
};
&sdhci {
bus-width = <8>;
mmc-hs200-1_8v;
non-removable;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_1v8>;
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdmmc1 {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
sd-uhs-sdr104;
vmmc-supply = <&vcc_wl>;
vqmmc-supply = <&vcc_1v8>;
status = "okay";
};
&sfc {
pinctrl-0 = <&fspi_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
};
};
/* spdif is exposed on con40 pin 18 */
&spdif {
status = "okay";
};
/* spi1 is exposed on con40
* pin 11 - spi1_mosi_m1
* pin 13 - spi1_miso_m1
* pin 15 - spi1_clk_m1
* pin 17 - spi1_cs0_m1
*/
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
};
&tsadc {
/* tshut mode 0:CRU 1:GPIO */
rockchip,hw-tshut-mode = <1>;
/* tshut polarity 0:LOW 1:HIGH */
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
/* uart0 is exposed on con40
* pin 12 - uart0_tx
* pin 14 - uart0_rx
*/
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
status = "okay";
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk817 1>;
clock-names = "lpo";
host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
vbat-supply = <&vcc_sys>;
vddio-supply = <&vcca1v8_pmu>;
max-speed = <3000000>;
};
};
/* uart2 is exposed on con40
* pin 8 - uart2_tx_m0_debug
* pin 10 - uart2_rx_m0_debug
*/
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host0_xhci {
dr_mode = "host";
status = "okay";
};
/* usb3 controller is muxed with sata1 */
&usb_host1_xhci {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc5v0_usb20_host>;
status = "okay";
};
&usb2phy0_otg {
phy-supply = <&vcc5v0_usb20_otg>;
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy1_host {
phy-supply = <&vcc5v0_usb20_host>;
status = "okay";
};
&usb2phy1_otg {
phy-supply = <&vcc5v0_usb20_host>;
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};
Reference in a new issue View git blame Copy permalink