mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 18:10:13 +00:00
02d138b7ca
Import initial support for BPI-CM4 module with BPI-CM4IO baseboard from the Linux submission applied at [1]. The BananaPi BPI-CM4 module follows the CM4 specifications at [2], but with a single HDMI port and a single DSI output. The current CM4IO baseboard DT should work fine on the Raspberry CM4 baseboard and other derivatives baseboards, but proper DT should be written for other baseboards. [1] https://git.kernel.org/amlogic/c/0262f2736978b1763363224698f47112a148dab0 [2] https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf Link: https://lore.kernel.org/r/20230307-u-boot-cm4-v1-1-43f5a393cd37@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
388 lines
7.2 KiB
Text
388 lines
7.2 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
|
|
*/
|
|
|
|
#include "meson-g12b-a311d.dtsi"
|
|
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart_AO;
|
|
rtc1 = &vrtc;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
emmc_pwrseq: emmc-pwrseq {
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x40000000>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>;
|
|
clocks = <&wifi32k>;
|
|
clock-names = "ext_clock";
|
|
};
|
|
|
|
emmc_1v8: regulator-emmc-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "EMMC_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vddao_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
dc_in: regulator-dc-in {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "DC_IN";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddio_c: regulator-vddio-c {
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "VDDIO_C";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
|
|
gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>;
|
|
gpios-states = <1>;
|
|
|
|
states = <1800000 0>,
|
|
<3300000 1>;
|
|
};
|
|
|
|
vddao_1v8: regulator-vddao-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDDAO_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vddao_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddao_3v3: regulator-vddao-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDDAO_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&dc_in>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddcpu_a: regulator-vddcpu-a {
|
|
/*
|
|
* MP8756GD DC/DC Regulator.
|
|
*/
|
|
compatible = "pwm-regulator";
|
|
|
|
regulator-name = "VDDCPU_A";
|
|
regulator-min-microvolt = <680000>;
|
|
regulator-max-microvolt = <1040000>;
|
|
|
|
pwm-supply = <&dc_in>;
|
|
|
|
pwms = <&pwm_ab 0 1250 0>;
|
|
pwm-dutycycle-range = <100 0>;
|
|
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddcpu_b: regulator-vddcpu-b {
|
|
/*
|
|
* SY8120B1ABC DC/DC Regulator.
|
|
*/
|
|
compatible = "pwm-regulator";
|
|
|
|
regulator-name = "VDDCPU_B";
|
|
regulator-min-microvolt = <680000>;
|
|
regulator-max-microvolt = <1040000>;
|
|
|
|
pwm-supply = <&dc_in>;
|
|
|
|
pwms = <&pwm_AO_cd 1 1250 0>;
|
|
pwm-dutycycle-range = <100 0>;
|
|
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
wifi32k: wifi32k {
|
|
compatible = "pwm-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
|
};
|
|
};
|
|
|
|
&arb {
|
|
status = "okay";
|
|
};
|
|
|
|
&clkc_audio {
|
|
status = "okay";
|
|
};
|
|
|
|
&cec_AO {
|
|
pinctrl-0 = <&cec_ao_a_h_pins>;
|
|
pinctrl-names = "default";
|
|
hdmi-phandle = <&hdmi_tx>;
|
|
};
|
|
|
|
&cecb_AO {
|
|
pinctrl-0 = <&cec_ao_b_h_pins>;
|
|
pinctrl-names = "default";
|
|
hdmi-phandle = <&hdmi_tx>;
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vddcpu_b>;
|
|
operating-points-v2 = <&cpu_opp_table_0>;
|
|
clocks = <&clkc CLKID_CPU_CLK>;
|
|
clock-latency = <50000>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <&vddcpu_b>;
|
|
operating-points-v2 = <&cpu_opp_table_0>;
|
|
clocks = <&clkc CLKID_CPU_CLK>;
|
|
clock-latency = <50000>;
|
|
};
|
|
|
|
&cpu100 {
|
|
cpu-supply = <&vddcpu_a>;
|
|
operating-points-v2 = <&cpub_opp_table_1>;
|
|
clocks = <&clkc CLKID_CPUB_CLK>;
|
|
clock-latency = <50000>;
|
|
};
|
|
|
|
&cpu101 {
|
|
cpu-supply = <&vddcpu_a>;
|
|
operating-points-v2 = <&cpub_opp_table_1>;
|
|
clocks = <&clkc CLKID_CPUB_CLK>;
|
|
clock-latency = <50000>;
|
|
};
|
|
|
|
&cpu102 {
|
|
cpu-supply = <&vddcpu_a>;
|
|
operating-points-v2 = <&cpub_opp_table_1>;
|
|
clocks = <&clkc CLKID_CPUB_CLK>;
|
|
clock-latency = <50000>;
|
|
};
|
|
|
|
&cpu103 {
|
|
cpu-supply = <&vddcpu_a>;
|
|
operating-points-v2 = <&cpub_opp_table_1>;
|
|
clocks = <&clkc CLKID_CPUB_CLK>;
|
|
clock-latency = <50000>;
|
|
};
|
|
|
|
&ext_mdio {
|
|
external_phy: ethernet-phy@0 {
|
|
/* Realtek RTL8211F (0x001cc916) */
|
|
reg = <0>;
|
|
max-speed = <1000>;
|
|
|
|
interrupt-parent = <&gpio_intc>;
|
|
/* MAC_INTR on GPIOZ_14 */
|
|
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
/* Ethernet to be enabled in baseboard DT */
|
|
ðmac {
|
|
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
phy-mode = "rgmii-txid";
|
|
phy-handle = <&external_phy>;
|
|
};
|
|
|
|
&frddr_a {
|
|
status = "okay";
|
|
};
|
|
|
|
&frddr_b {
|
|
status = "okay";
|
|
};
|
|
|
|
&frddr_c {
|
|
status = "okay";
|
|
};
|
|
|
|
/* HDMI to be enabled in baseboard DT */
|
|
&hdmi_tx {
|
|
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
|
pinctrl-names = "default";
|
|
hdmi-supply = <&dc_in>;
|
|
};
|
|
|
|
/* "Camera" I2C bus */
|
|
&i2c1 {
|
|
pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
/* Main I2C bus */
|
|
&i2c2 {
|
|
pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
/* "ID" I2C bus */
|
|
&i2c3 {
|
|
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&pcie {
|
|
reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&pwm_ab {
|
|
pinctrl-0 = <&pwm_a_e_pins>;
|
|
pinctrl-names = "default";
|
|
clocks = <&xtal>;
|
|
clock-names = "clkin0";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm_ef {
|
|
pinctrl-0 = <&pwm_e_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm_AO_cd {
|
|
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
|
pinctrl-names = "default";
|
|
clocks = <&xtal>;
|
|
clock-names = "clkin1";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vddao_1v8>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
/* on-module SDIO WiFi */
|
|
&sd_emmc_a {
|
|
pinctrl-0 = <&sdio_pins>;
|
|
pinctrl-1 = <&sdio_clk_gate_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
bus-width = <4>;
|
|
sd-uhs-sdr104;
|
|
max-frequency = <50000000>;
|
|
|
|
non-removable;
|
|
disable-wp;
|
|
|
|
/* WiFi firmware requires power in suspend */
|
|
keep-power-in-suspend;
|
|
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
|
|
vmmc-supply = <&vddao_3v3>;
|
|
vqmmc-supply = <&vddao_3v3>;
|
|
|
|
status = "okay";
|
|
|
|
rtl8822cs: wifi@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
/* SD card to be enabled in baseboard DT */
|
|
&sd_emmc_b {
|
|
pinctrl-0 = <&sdcard_c_pins>;
|
|
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
max-frequency = <50000000>;
|
|
disable-wp;
|
|
|
|
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <&vddao_3v3>;
|
|
vqmmc-supply = <&vddio_c>;
|
|
};
|
|
|
|
/* on-module eMMC */
|
|
&sd_emmc_c {
|
|
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
|
pinctrl-1 = <&emmc_clk_gate_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
max-frequency = <200000000>;
|
|
disable-wp;
|
|
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
vmmc-supply = <&vddao_3v3>;
|
|
vqmmc-supply = <&vddao_1v8>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&tdmif_b {
|
|
status = "okay";
|
|
};
|
|
|
|
&tdmout_b {
|
|
status = "okay";
|
|
};
|
|
|
|
/* on-module UART BT */
|
|
&uart_A {
|
|
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
|
pinctrl-names = "default";
|
|
uart-has-rtscts;
|
|
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "realtek,rtl8822cs-bt";
|
|
enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
|
|
host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
|
|
device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&uart_AO {
|
|
pinctrl-0 = <&uart_ao_a_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb {
|
|
phys = <&usb2_phy0>, <&usb2_phy1>;
|
|
phy-names = "usb2-phy0", "usb2-phy1";
|
|
};
|