mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 11:18:28 +00:00
21b02414f1
BD71837 and BD71847 is PMIC intended for powering single-core, dual-core, and quad-core SoC’s such as NXP-i.MX 8M. BD71847 is used for example on NXP imx8mm EVK. Add regulator driver for ROHM BD71837 and BD71847 PMICs. BD71837 contains 8 bucks and 7 LDOS. BD71847 is reduced version containing 6 bucks and 6 LDOs. Voltages for DVS bucks (1-4 on BD71837, 1 and 2 on BD71847) can be adjusted when regulators are enabled. For other bucks and LDOs we may have over- or undershooting if voltage is adjusted when regulator is enabled. Thus this is prevented by default. BD718x7 has a quirk which may leave power output disabled after reset if enable/disable state was controlled by SW. Thus the SW control is only allowed for BD71837 bucks 3 and 4 by default. The impact of this limitation must be evaluated board-by board and restrictions may need to be modified. (Linux driver get's these limitations from DT and we may want to implement same on u-Boot driver). Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
||
|---|---|---|
| .. | ||
| act8846.c | ||
| as3722_regulator.c | ||
| bd71837.c | ||
| fan53555.c | ||
| fixed.c | ||
| gpio-regulator.c | ||
| Kconfig | ||
| lp873x_regulator.c | ||
| lp87565_regulator.c | ||
| Makefile | ||
| max77686.c | ||
| palmas_regulator.c | ||
| pbias_regulator.c | ||
| pfuze100.c | ||
| pwm_regulator.c | ||
| regulator-uclass.c | ||
| regulator_common.c | ||
| regulator_common.h | ||
| rk8xx.c | ||
| s2mps11_regulator.c | ||
| s5m8767.c | ||
| sandbox.c | ||
| stm32-vrefbuf.c | ||
| stpmic1.c | ||
| tps65090_regulator.c | ||
| tps65910_regulator.c | ||