mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 18:10:13 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
435 lines
11 KiB
C
435 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Amarula Solutions B.V.
|
|
* Copyright (C) 2016 Engicam S.r.l.
|
|
* Author: Jagan Teki <jagan@amarulasolutions.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <image.h>
|
|
#include <init.h>
|
|
#include <serial.h>
|
|
#include <spl.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-ddr.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/video.h>
|
|
|
|
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
|
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
static iomux_v3_cfg_t const uart_pads[] = {
|
|
#ifdef CONFIG_MX6QDL
|
|
IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
|
|
#elif CONFIG_MX6UL
|
|
IOMUX_PADS(PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL)),
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_SPL_LOAD_FIT
|
|
int board_fit_config_name_match(const char *name)
|
|
{
|
|
if (is_mx6dq() && !strcmp(name, "imx6q-icore"))
|
|
return 0;
|
|
else if (is_mx6dq() && !strcmp(name, "imx6q-icore-rqs"))
|
|
return 0;
|
|
else if (is_mx6dq() && !strcmp(name, "imx6q-icore-mipi"))
|
|
return 0;
|
|
else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore"))
|
|
return 0;
|
|
else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore-rqs"))
|
|
return 0;
|
|
else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore-mipi"))
|
|
return 0;
|
|
else
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_MMC
|
|
void board_boot_order(u32 *spl_boot_list)
|
|
{
|
|
u32 bmode = imx6_src_get_boot_mode();
|
|
u8 boot_dev = BOOT_DEVICE_MMC1;
|
|
|
|
switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
|
|
case IMX6_BMODE_SD:
|
|
case IMX6_BMODE_ESD:
|
|
/* SD/eSD - BOOT_DEVICE_MMC1 */
|
|
break;
|
|
case IMX6_BMODE_MMC:
|
|
case IMX6_BMODE_EMMC:
|
|
/* MMC/eMMC */
|
|
boot_dev = BOOT_DEVICE_MMC2;
|
|
break;
|
|
default:
|
|
/* Default - BOOT_DEVICE_MMC1 */
|
|
printf("Wrong board boot order\n");
|
|
break;
|
|
}
|
|
|
|
spl_boot_list[0] = boot_dev;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
int spl_start_uboot(void)
|
|
{
|
|
/* break into full u-boot on 'c' */
|
|
if (serial_tstc() && serial_getc() == 'c')
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MX6QDL
|
|
/*
|
|
* Driving strength:
|
|
* 0x30 == 40 Ohm
|
|
* 0x28 == 48 Ohm
|
|
*/
|
|
#define IMX6DQ_DRIVE_STRENGTH 0x30
|
|
#define IMX6SDL_DRIVE_STRENGTH 0x28
|
|
|
|
/* configure MX6Q/DUAL mmdc DDR io registers */
|
|
static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
|
|
.dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_cas = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_ras = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_reset = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdcke0 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdcke1 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdba2 = 0x00000000,
|
|
.dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
|
|
};
|
|
|
|
/* configure MX6Q/DUAL mmdc GRP io registers */
|
|
static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
|
|
.grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_addds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
.grp_ddrpke = 0x00000000,
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_ddr_type = 0x000c0000,
|
|
};
|
|
|
|
/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
|
|
struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
|
|
.dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_cas = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_ras = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_reset = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdba2 = 0x00000000,
|
|
.dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm0 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm1 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm2 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm3 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm4 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm5 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm6 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm7 = IMX6SDL_DRIVE_STRENGTH,
|
|
};
|
|
|
|
/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
|
|
struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
|
|
.grp_ddr_type = 0x000c0000,
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
.grp_ddrpke = 0x00000000,
|
|
.grp_addds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_ctlds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_b0ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b1ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b2ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b3ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b4ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b5ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b6ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b7ds = IMX6SDL_DRIVE_STRENGTH,
|
|
};
|
|
|
|
/* mt41j256 */
|
|
static struct mx6_ddr3_cfg mt41j256 = {
|
|
.mem_speed = 1066,
|
|
.density = 2,
|
|
.width = 16,
|
|
.banks = 8,
|
|
.rowaddr = 13,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1375,
|
|
.trcmin = 4875,
|
|
.trasmin = 3500,
|
|
.SRT = 0,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6dq_mmdc_calib = {
|
|
.p0_mpwldectrl0 = 0x000E0009,
|
|
.p0_mpwldectrl1 = 0x0018000E,
|
|
.p1_mpwldectrl0 = 0x00000007,
|
|
.p1_mpwldectrl1 = 0x00000000,
|
|
.p0_mpdgctrl0 = 0x43280334,
|
|
.p0_mpdgctrl1 = 0x031C0314,
|
|
.p1_mpdgctrl0 = 0x4318031C,
|
|
.p1_mpdgctrl1 = 0x030C0258,
|
|
.p0_mprddlctl = 0x3E343A40,
|
|
.p1_mprddlctl = 0x383C3844,
|
|
.p0_mpwrdlctl = 0x40404440,
|
|
.p1_mpwrdlctl = 0x4C3E4446,
|
|
};
|
|
|
|
/* DDR 64bit */
|
|
static struct mx6_ddr_sysinfo mem_q = {
|
|
.ddr_type = DDR_TYPE_DDR3,
|
|
.dsize = 2,
|
|
.cs1_mirror = 0,
|
|
/* config for full 4GB range so that get_mem_size() works */
|
|
.cs_density = 32,
|
|
.ncs = 1,
|
|
.bi_on = 1,
|
|
.rtt_nom = 2,
|
|
.rtt_wr = 2,
|
|
.ralat = 5,
|
|
.walat = 0,
|
|
.mif3_mode = 3,
|
|
.rst_to_cke = 0x23,
|
|
.sde_to_rst = 0x10,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6dl_mmdc_calib = {
|
|
.p0_mpwldectrl0 = 0x001F0024,
|
|
.p0_mpwldectrl1 = 0x00110018,
|
|
.p1_mpwldectrl0 = 0x001F0024,
|
|
.p1_mpwldectrl1 = 0x00110018,
|
|
.p0_mpdgctrl0 = 0x4230022C,
|
|
.p0_mpdgctrl1 = 0x02180220,
|
|
.p1_mpdgctrl0 = 0x42440248,
|
|
.p1_mpdgctrl1 = 0x02300238,
|
|
.p0_mprddlctl = 0x44444A48,
|
|
.p1_mprddlctl = 0x46484A42,
|
|
.p0_mpwrdlctl = 0x38383234,
|
|
.p1_mpwrdlctl = 0x3C34362E,
|
|
};
|
|
|
|
/* DDR 64bit 1GB */
|
|
static struct mx6_ddr_sysinfo mem_dl = {
|
|
.dsize = 2,
|
|
.cs1_mirror = 0,
|
|
/* config for full 4GB range so that get_mem_size() works */
|
|
.cs_density = 32,
|
|
.ncs = 1,
|
|
.bi_on = 1,
|
|
.rtt_nom = 1,
|
|
.rtt_wr = 1,
|
|
.ralat = 5,
|
|
.walat = 0,
|
|
.mif3_mode = 3,
|
|
.rst_to_cke = 0x23,
|
|
.sde_to_rst = 0x10,
|
|
};
|
|
|
|
/* DDR 32bit 512MB */
|
|
static struct mx6_ddr_sysinfo mem_s = {
|
|
.dsize = 1,
|
|
.cs1_mirror = 0,
|
|
/* config for full 4GB range so that get_mem_size() works */
|
|
.cs_density = 32,
|
|
.ncs = 1,
|
|
.bi_on = 1,
|
|
.rtt_nom = 1,
|
|
.rtt_wr = 1,
|
|
.ralat = 5,
|
|
.walat = 0,
|
|
.mif3_mode = 3,
|
|
.rst_to_cke = 0x23,
|
|
.sde_to_rst = 0x10,
|
|
};
|
|
#endif /* CONFIG_MX6QDL */
|
|
|
|
#ifdef CONFIG_MX6UL
|
|
static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
|
|
.grp_addds = 0x00000030,
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
.grp_b0ds = 0x00000030,
|
|
.grp_ctlds = 0x00000030,
|
|
.grp_b1ds = 0x00000030,
|
|
.grp_ddrpke = 0x00000000,
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_ddr_type = 0x000c0000,
|
|
};
|
|
|
|
static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
|
|
.dram_dqm0 = 0x00000030,
|
|
.dram_dqm1 = 0x00000030,
|
|
.dram_ras = 0x00000030,
|
|
.dram_cas = 0x00000030,
|
|
.dram_odt0 = 0x00000030,
|
|
.dram_odt1 = 0x00000030,
|
|
.dram_sdba2 = 0x00000000,
|
|
.dram_sdclk_0 = 0x00000008,
|
|
.dram_sdqs0 = 0x00000038,
|
|
.dram_sdqs1 = 0x00000030,
|
|
.dram_reset = 0x00000030,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6_mmcd_calib = {
|
|
.p0_mpwldectrl0 = 0x00070007,
|
|
.p0_mpdgctrl0 = 0x41490145,
|
|
.p0_mprddlctl = 0x40404546,
|
|
.p0_mpwrdlctl = 0x4040524D,
|
|
};
|
|
|
|
struct mx6_ddr_sysinfo ddr_sysinfo = {
|
|
.dsize = 0,
|
|
.cs_density = 20,
|
|
.ncs = 1,
|
|
.cs1_mirror = 0,
|
|
.rtt_wr = 2,
|
|
.rtt_nom = 1, /* RTT_Nom = RZQ/2 */
|
|
.walat = 1, /* Write additional latency */
|
|
.ralat = 5, /* Read additional latency */
|
|
.mif3_mode = 3, /* Command prediction working mode */
|
|
.bi_on = 1, /* Bank interleaving enabled */
|
|
.sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
|
|
.rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
|
|
.ddr_type = DDR_TYPE_DDR3,
|
|
};
|
|
|
|
static struct mx6_ddr3_cfg mem_ddr = {
|
|
.mem_speed = 800,
|
|
.density = 4,
|
|
.width = 16,
|
|
.banks = 8,
|
|
#ifdef TARGET_MX6UL_ISIOT
|
|
.rowaddr = 15,
|
|
#else
|
|
.rowaddr = 13,
|
|
#endif
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1375,
|
|
.trcmin = 4875,
|
|
.trasmin = 3500,
|
|
};
|
|
#endif /* CONFIG_MX6UL */
|
|
|
|
static void ccgr_init(void)
|
|
{
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
#ifdef CONFIG_MX6QDL
|
|
writel(0x00003F3F, &ccm->CCGR0);
|
|
writel(0x0030FC00, &ccm->CCGR1);
|
|
writel(0x000FC000, &ccm->CCGR2);
|
|
writel(0x3F300000, &ccm->CCGR3);
|
|
writel(0xFF00F300, &ccm->CCGR4);
|
|
writel(0x0F0000C3, &ccm->CCGR5);
|
|
writel(0x000003CC, &ccm->CCGR6);
|
|
#elif CONFIG_MX6UL
|
|
writel(0x00c03f3f, &ccm->CCGR0);
|
|
writel(0xfcffff00, &ccm->CCGR1);
|
|
writel(0x0cffffcc, &ccm->CCGR2);
|
|
writel(0x3f3c3030, &ccm->CCGR3);
|
|
writel(0xff00fffc, &ccm->CCGR4);
|
|
writel(0x033f30ff, &ccm->CCGR5);
|
|
writel(0x00c00fff, &ccm->CCGR6);
|
|
#endif
|
|
}
|
|
|
|
static void spl_dram_init(void)
|
|
{
|
|
#ifdef CONFIG_MX6QDL
|
|
if (is_mx6solo()) {
|
|
mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
|
|
mx6_dram_cfg(&mem_s, &mx6dl_mmdc_calib, &mt41j256);
|
|
} else if (is_mx6dl()) {
|
|
mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
|
|
mx6_dram_cfg(&mem_dl, &mx6dl_mmdc_calib, &mt41j256);
|
|
} else if (is_mx6dq()) {
|
|
mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
|
|
mx6_dram_cfg(&mem_q, &mx6dq_mmdc_calib, &mt41j256);
|
|
}
|
|
#elif CONFIG_MX6UL
|
|
mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
|
|
mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
|
|
#endif
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
ccgr_init();
|
|
|
|
/* setup AIPS and disable watchdog */
|
|
arch_cpu_init();
|
|
|
|
if (!(is_mx6ul()))
|
|
gpr_init();
|
|
|
|
/* iomux */
|
|
SETUP_IOMUX_PADS(uart_pads);
|
|
|
|
/* setup GP timer */
|
|
timer_init();
|
|
|
|
/* UART clocks enabled and gd valid - init serial console */
|
|
preloader_console_init();
|
|
|
|
/* DDR initialization */
|
|
spl_dram_init();
|
|
}
|