mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
ed9720d055
Provide a man-page for the pinmux command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
95 lines
2.2 KiB
ReStructuredText
95 lines
2.2 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+:
|
|
|
|
pinmux command
|
|
==============
|
|
|
|
Synopsis
|
|
--------
|
|
|
|
::
|
|
|
|
pinmux list
|
|
pinmux dev [pincontroller-name]
|
|
pinmux status [-a | pin-name]
|
|
|
|
Description
|
|
-----------
|
|
|
|
The pinmux command is used to show the pin-controller muxing.
|
|
|
|
The 'pinmux list' command diplays the available pin-controller.
|
|
|
|
The 'pinmux dev' command selects the pin-controller for next commands.
|
|
|
|
pincontroller-name
|
|
name of the pin-controller to select
|
|
|
|
The 'pinmux status' command displays the pin muxing information.
|
|
|
|
\-a
|
|
display pin muxing of all pin-controllers.
|
|
pin-name
|
|
name of the pin to display
|
|
|
|
Example
|
|
-------
|
|
|
|
::
|
|
|
|
=> pinmux list
|
|
| Device | Driver | Parent
|
|
| pinctrl-gpio | sandbox_pinctrl_gpio | root_driver
|
|
| pinctrl | sandbox_pinctrl | root_driver
|
|
=>
|
|
=> pinmux dev pinctrl
|
|
dev: pinctrl
|
|
=>
|
|
=> pinmux status
|
|
P0 : UART TX.
|
|
P1 : UART RX.
|
|
P2 : I2S SCK.
|
|
P3 : I2S SD.
|
|
P4 : I2S WS.
|
|
P5 : GPIO0 bias-pull-up input-disable.
|
|
P6 : GPIO1 drive-open-drain.
|
|
P7 : GPIO2 bias-pull-down input-enable.
|
|
P8 : GPIO3 bias-disable.
|
|
=>
|
|
=> pinmux status P0
|
|
P0 : UART TX.
|
|
=>
|
|
=> pinmux status -a
|
|
--------------------------
|
|
pinctrl-gpio:
|
|
a0 : gpio input .
|
|
a1 : gpio input .
|
|
a2 : gpio input .
|
|
a3 : gpio input .
|
|
a4 : gpio input .
|
|
a5 : gpio output .
|
|
a6 : gpio output .
|
|
a7 : gpio input .
|
|
a8 : gpio input .
|
|
a9 : gpio input .
|
|
--------------------------
|
|
pinctrl:
|
|
P0 : UART TX.
|
|
P1 : UART RX.
|
|
P2 : I2S SCK.
|
|
P3 : I2S SD.
|
|
P4 : I2S WS.
|
|
P5 : GPIO0 bias-pull-up input-disable.
|
|
P6 : GPIO1 drive-open-drain.
|
|
P7 : GPIO2 bias-pull-down input-enable.
|
|
P8 : GPIO3 bias-disable.
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
The pinmux command is only available if CONFIG_CMD_PINMUX=y.
|
|
|
|
Return value
|
|
------------
|
|
|
|
The return value $? is set to 0 (true) if the command succeded and to 1 (false)
|
|
otherwise.
|