mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
1d78d68349
Add PSGTR driver for Xilinx ZynqMP. The most of configurations are taken from Linux kernel psgtr driver. USB3.0 and SGMII configurations are tested on SOM. In SGMII case also IOU_SLCR reg is updated to get proper clock setup and signal detection configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/36e6e9d3baf8511af1916e91e4887032ca2b6c20.1641458978.git.michal.simek@xilinx.com
295 lines
8 KiB
Text
295 lines
8 KiB
Text
|
|
menu "PHY Subsystem"
|
|
|
|
config PHY
|
|
bool "PHY Core"
|
|
depends on DM
|
|
help
|
|
PHY support.
|
|
|
|
This framework is designed to provide a generic interface for PHY
|
|
devices. PHY devices are dedicated hardware that handle the physical
|
|
layer of the protocols in the OSI model.
|
|
PHYs are commonly used for high speed interfaces such as Serial-ATA
|
|
or PCI express.
|
|
The API provides functions to initialize/deinitialize the
|
|
PHY, power on/off the PHY, and reset the PHY. It's meant to be as
|
|
compatible as possible with the equivalent framework found in the
|
|
linux kernel.
|
|
|
|
config SPL_PHY
|
|
bool "PHY Core in SPL"
|
|
depends on DM && SPL
|
|
help
|
|
PHY support in SPL.
|
|
|
|
This framework is designed to provide a generic interface for PHY
|
|
devices. PHY devices are dedicated hardware that handle the physical
|
|
layer of the protocols (https://en.wikipedia.org/wiki/OSI_model).
|
|
PHYs are commonly used for high speed interfaces such as Serial-ATA
|
|
or PCI express.
|
|
The API provides functions to initialize/deinitialize the
|
|
PHY, power on/off the PHY, and reset the PHY. It's meant to be as
|
|
compatible as possible with the equivalent framework found in the
|
|
linux kernel.
|
|
|
|
config PHY_SANDBOX
|
|
bool "Sandbox PHY support"
|
|
depends on SANDBOX
|
|
depends on PHY
|
|
help
|
|
This select a dummy sandbox PHY driver. It used only to implement
|
|
the unit tests for the phy framework
|
|
|
|
config NOP_PHY
|
|
bool "NOP PHY driver"
|
|
depends on PHY
|
|
help
|
|
Support for a no-op PHY driver (stubbed PHY driver).
|
|
|
|
This is useful when a driver uses the PHY framework but no real PHY
|
|
hardware exists.
|
|
|
|
config SPL_NOP_PHY
|
|
bool "NOP PHY driver in SPL"
|
|
depends on SPL_PHY
|
|
help
|
|
Support for a no-op PHY driver (stubbed PHY driver) in the SPL.
|
|
|
|
This is useful when a driver uses the PHY framework but no real PHY
|
|
hardware exists.
|
|
|
|
config MIPI_DPHY_HELPERS
|
|
bool "MIPI D-PHY support helpers"
|
|
help
|
|
Provides a number of helpers a core functions for MIPI D-PHY drivers.
|
|
|
|
config AB8500_USB_PHY
|
|
bool "AB8500 USB PHY Driver"
|
|
depends on PHY && PMIC_AB8500
|
|
help
|
|
Support for the USB OTG PHY in ST-Ericsson AB8500.
|
|
|
|
config BCM6318_USBH_PHY
|
|
bool "BCM6318 USBH PHY support"
|
|
depends on PHY && ARCH_BMIPS
|
|
select POWER_DOMAIN
|
|
help
|
|
Support for the Broadcom MIPS BCM6318 USBH PHY.
|
|
|
|
config BCM6348_USBH_PHY
|
|
bool "BCM6348 USBH PHY support"
|
|
depends on PHY && ARCH_BMIPS
|
|
help
|
|
Support for the Broadcom MIPS BCM6348 USBH PHY.
|
|
|
|
config BCM6358_USBH_PHY
|
|
bool "BCM6358 USBH PHY support"
|
|
depends on PHY && ARCH_BMIPS
|
|
help
|
|
Support for the Broadcom MIPS BCM6358 USBH PHY.
|
|
|
|
config BCM6368_USBH_PHY
|
|
bool "BCM6368 USBH PHY support"
|
|
depends on PHY && ARCH_BMIPS
|
|
help
|
|
Support for the Broadcom MIPS BCM6368 USBH PHY.
|
|
|
|
config BCM_SR_PCIE_PHY
|
|
bool "Broadcom Stingray PCIe PHY driver"
|
|
depends on PHY
|
|
help
|
|
Enable this to support the Broadcom Stingray PCIe PHY
|
|
If unsure, say N.
|
|
|
|
config PHY_DA8XX_USB
|
|
tristate "TI DA8xx USB PHY Driver"
|
|
depends on PHY && ARCH_DAVINCI
|
|
help
|
|
Enable this to support the USB PHY on DA8xx SoCs.
|
|
|
|
config PIPE3_PHY
|
|
bool "Support omap's PIPE3 PHY"
|
|
depends on PHY && ARCH_OMAP2PLUS
|
|
help
|
|
Support for the omap PIPE3 phy for sata
|
|
|
|
This PHY is found on omap devices supporting SATA such as dra7, am57x
|
|
and omap5
|
|
|
|
config SPL_PIPE3_PHY
|
|
bool "Support omap's PIPE3 PHY in SPL"
|
|
depends on SPL_PHY && ARCH_OMAP2PLUS
|
|
help
|
|
Support for the omap PIPE3 phy for sata in SPL
|
|
|
|
This PHY is found on omap devices supporting SATA such as dra7, am57x
|
|
and omap5
|
|
|
|
config AM654_PHY
|
|
tristate "TI AM654 SERDES support"
|
|
depends on PHY && ARCH_K3
|
|
select REGMAP
|
|
select SYSCON
|
|
help
|
|
This option enables support for TI AM654 SerDes PHY used for
|
|
PCIe.
|
|
|
|
config STI_USB_PHY
|
|
bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
|
|
depends on PHY && ARCH_STI
|
|
help
|
|
This is the generic phy driver for the picoPHY ports
|
|
used by USB2 and USB3 Host controllers available on
|
|
STiH407 SoC families.
|
|
|
|
config PHY_QCOM_IPQ4019_USB
|
|
tristate "Qualcomm IPQ4019 USB PHY driver"
|
|
depends on PHY && ARCH_IPQ40XX
|
|
help
|
|
Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
|
|
|
|
config PHY_RCAR_GEN2
|
|
tristate "Renesas R-Car Gen2 USB PHY"
|
|
depends on PHY && RCAR_GEN2
|
|
help
|
|
Support for the Renesas R-Car Gen2 USB PHY. This driver operates the
|
|
PHY connected to USBHS module, PCI EHCI module and USB3.0 module and
|
|
allows configuring the module multiplexing.
|
|
|
|
config PHY_RCAR_GEN3
|
|
tristate "Renesas R-Car Gen3 USB PHY"
|
|
depends on PHY && RCAR_GEN3 && CLK && DM_REGULATOR
|
|
default y if RCAR_GEN3
|
|
help
|
|
Support for the Renesas R-Car Gen3 USB PHY. This driver operates the
|
|
PHY connected to EHCI USB module and controls USB OTG operation.
|
|
|
|
config PHY_STM32_USBPHYC
|
|
tristate "STMicroelectronics STM32 SoC USB HS PHY driver"
|
|
depends on PHY && ARCH_STM32MP
|
|
help
|
|
Enable this to support the High-Speed USB transceiver that is part of
|
|
STMicroelectronics STM32 SoCs.
|
|
|
|
This driver controls the entire USB PHY block: the USB PHY controller
|
|
(USBPHYC) and the two 8-bit wide UTMI+ interface. First interface is
|
|
used by an HS USB Host controller, and the second one is shared
|
|
between an HS USB OTG controller and an HS USB Host controller,
|
|
selected by an USB switch.
|
|
|
|
config MESON_GXBB_USB_PHY
|
|
bool "Amlogic Meson GXBB USB PHY"
|
|
depends on PHY && ARCH_MESON && MESON_GXBB
|
|
imply REGMAP
|
|
help
|
|
This is the generic phy driver for the Amlogic Meson GXBB
|
|
USB2 PHY.
|
|
|
|
config MESON_GXL_USB_PHY
|
|
bool "Amlogic Meson GXL USB PHYs"
|
|
depends on PHY && ARCH_MESON && (MESON_GXL || MESON_GXM || MESON_AXG)
|
|
imply REGMAP
|
|
help
|
|
This is the generic phy driver for the Amlogic Meson GXL
|
|
USB2 and USB3 PHYS.
|
|
|
|
config MESON_G12A_USB_PHY
|
|
bool "Amlogic Meson G12A USB PHYs"
|
|
depends on PHY && ARCH_MESON && MESON_G12A
|
|
imply REGMAP
|
|
help
|
|
This is the generic phy driver for the Amlogic Meson G12A
|
|
USB2 and USB3 PHYS.
|
|
|
|
config MESON_AXG_MIPI_DPHY
|
|
bool "Amlogic Meson AXG MIPI D-PHY"
|
|
depends on PHY && ARCH_MESON && MESON_AXG
|
|
select MIPI_DPHY_HELPERS
|
|
imply REGMAP
|
|
help
|
|
This is the generic phy driver for the Amlogic Meson AXG
|
|
MIPI D-PHY.
|
|
|
|
config MESON_AXG_MIPI_PCIE_ANALOG_PHY
|
|
bool "Amlogic Meson AXG MIPI PCIe Analog PHY"
|
|
depends on PHY && ARCH_MESON && MESON_AXG
|
|
select MIPI_DPHY_HELPERS
|
|
imply REGMAP
|
|
help
|
|
This is the generic phy driver for the Amlogic Meson AXG
|
|
MIPI PCIe Analog PHY.
|
|
|
|
config MSM8916_USB_PHY
|
|
bool "Qualcomm MSM8916 USB PHY support"
|
|
depends on PHY
|
|
help
|
|
Support the USB PHY in msm8916
|
|
|
|
This PHY is found on qualcomm dragonboard410c development board.
|
|
|
|
config OMAP_USB2_PHY
|
|
bool "Support OMAP's USB2 PHY"
|
|
depends on PHY
|
|
depends on SYSCON
|
|
help
|
|
Support for the OMAP's USB2 PHY.
|
|
|
|
This PHY is found on OMAP devices supporting USB2.
|
|
|
|
|
|
config KEYSTONE_USB_PHY
|
|
bool "Support TI Keystone USB PHY"
|
|
depends on PHY
|
|
depends on ARCH_KEYSTONE
|
|
help
|
|
Support for the USB PHY found on some Keystone (k2) processors
|
|
|
|
This PHY is found on some Keystone (K2) devices supporting USB.
|
|
|
|
config MT7620_USB_PHY
|
|
bool "MediaTek MT7620 USB PHY support"
|
|
depends on PHY
|
|
depends on SOC_MT7620
|
|
help
|
|
Support the intergated USB PHY in MediaTek MT7620 SoC
|
|
|
|
config MT76X8_USB_PHY
|
|
bool "MediaTek MT76x8 (7628/88) USB PHY support"
|
|
depends on PHY
|
|
depends on SOC_MT7628
|
|
help
|
|
Support the USB PHY in MT76x8 SoCs
|
|
|
|
This PHY is found on MT76x8 devices supporting USB.
|
|
|
|
config PHY_MTK_TPHY
|
|
bool "MediaTek T-PHY Driver"
|
|
depends on PHY
|
|
depends on ARCH_MEDIATEK
|
|
help
|
|
MediaTek T-PHY driver supports usb2.0, usb3.0 ports, PCIe and
|
|
SATA, and meanwhile supports two version T-PHY which have
|
|
different banks layout, the T-PHY with shared banks between
|
|
multi-ports is first version, otherwise is second veriosn,
|
|
so you can easily distinguish them by banks layout.
|
|
|
|
config PHY_IMX8MQ_USB
|
|
bool "NXP i.MX8MQ USB PHY Driver"
|
|
depends on PHY
|
|
depends on IMX8MQ
|
|
help
|
|
Support the USB3.0 PHY in NXP i.MX8MQ SoC
|
|
|
|
config PHY_XILINX_ZYNQMP
|
|
tristate "Xilinx ZynqMP PHY driver"
|
|
depends on PHY && ARCH_ZYNQMP
|
|
help
|
|
Enable this to support ZynqMP High Speed Gigabit Transceiver
|
|
that is part of ZynqMP SoC.
|
|
|
|
source "drivers/phy/rockchip/Kconfig"
|
|
source "drivers/phy/cadence/Kconfig"
|
|
source "drivers/phy/ti/Kconfig"
|
|
|
|
endmenu
|