u-boot/board/bubinga405ep/bubinga405ep.c
wdenk c837dcb1a3 * The PS/2 mux on the BMS2003 board needs 450 ms after power on
before we can access it; add delay in case we are faster (with no
  CF card inserted)

* Cleanup of some init functions

* Make sure SCC Ethernet is always stopped by the time we boot Linux
  to avoid Linux crashes by early packets coming in.

* Accelerate flash accesses on LWMON board by using buffered writes
2004-01-20 23:12:12 +00:00

117 lines
2.9 KiB
C

/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
long int spd_sdram (void);
#include <common.h>
#include <asm/processor.h>
int board_early_init_f (void)
{
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr (uicer, 0x00000000); /* disable all ints */
mtdcr (uiccr, 0x00000010);
mtdcr (uicpr, 0xFFFF7FF0); /* set int polarities */
mtdcr (uictr, 0x00000010); /* set int trigger levels */
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
#if 0
#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
/* CS1 */
/* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
mtebc (pb1ap, 0x02815480);
mtebc (pb1cr, 0xF0018000);
p = (unsigned int*)0xEF600708;
t = *p;
t = t | 0x00000400;
*p = t;
/* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
mtebc (pb2ap, 0x04815A80);
mtebc (pb2cr, 0xF0118000);
/* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
mtebc (pb3ap, 0x01815280);
mtebc (pb3cr, 0xF0218000);
/* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
mtebc (pb7ap, 0x01815280);
mtebc (pb7cr, 0xF0318000);
/* set UART1 control to select CTS/RTS */
#define FPGA_BRDC 0xF0300004
*(volatile char *) (FPGA_BRDC) |= 0x1;
#endif
return 0;
}
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*/
int checkboard (void)
{
unsigned char *s = getenv ("serial#");
puts ("Board: IBM 405EP Eval Board");
if (s != NULL) {
puts (", serial# ");
puts (s);
}
putc ('\n');
return (0);
}
/* -------------------------------------------------------------------------
initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
the necessary info for SDRAM controller configuration
------------------------------------------------------------------------- */
long int initdram (int board_type)
{
long int ret;
ret = spd_sdram ();
return ret;
}
/* ------------------------------------------------------------------------- */
int testdram (void)
{
/* TODO: XXX XXX XXX */
printf ("test: xxx MB - ok\n");
return (0);
}
/* ------------------------------------------------------------------------- */