u-boot/arch/x86/cpu/broadwell/pch.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

540 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2016 Google, Inc
*/
#include <common.h>
#include <dm.h>
#include <pch.h>
#include <asm/cpu.h>
#include <asm/gpio.h>
#include <asm/i8259.h>
#include <asm/intel_regs.h>
#include <asm/io.h>
#include <asm/ioapic.h>
#include <asm/lpc_common.h>
#include <asm/pch_common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/iomap.h>
#include <asm/arch/pch.h>
#include <asm/arch/pm.h>
#include <asm/arch/rcb.h>
#include <asm/arch/spi.h>
#define BIOS_CTRL 0xdc
bool cpu_is_ult(void)
{
u32 fm = cpu_get_family_model();
return fm == BROADWELL_FAMILY_ULT || fm == HASWELL_FAMILY_ULT;
}
static int broadwell_pch_early_init(struct udevice *dev)
{
struct gpio_desc desc;
struct udevice *bus;
pci_dev_t bdf;
int ret;
dm_pci_write_config32(dev, PCH_RCBA, RCB_BASE_ADDRESS | 1);
dm_pci_write_config32(dev, PMBASE, ACPI_BASE_ADDRESS | 1);
dm_pci_write_config8(dev, ACPI_CNTL, ACPI_EN);
dm_pci_write_config32(dev, GPIO_BASE, GPIO_BASE_ADDRESS | 1);
dm_pci_write_config8(dev, GPIO_CNTL, GPIO_EN);
/* Enable IOAPIC */
writew(0x1000, RCB_REG(OIC));
/* Read back for posted write */
readw(RCB_REG(OIC));
/* Set HPET address and enable it */
clrsetbits_le32(RCB_REG(HPTC), 3, 1 << 7);
/* Read back for posted write */
readl(RCB_REG(HPTC));
/* Enable HPET to start counter */
setbits_le32(HPET_BASE_ADDRESS + 0x10, 1 << 0);
setbits_le32(RCB_REG(GCS), 1 << 5);
/*
* Enable PP3300_AUTOBAHN_EN after initial GPIO setup
* to prevent possible brownout. This will cause the GPIOs to be set
* up if it has not been done already.
*/
ret = gpio_request_by_name(dev, "power-enable-gpio", 0, &desc,
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
if (ret)
return ret;
/* 8.14 Additional PCI Express Programming Steps, step #1 */
bdf = PCI_BDF(0, 0x1c, 0);
bus = pci_get_controller(dev);
pci_bus_clrset_config32(bus, bdf, 0xf4, 0x60, 0);
pci_bus_clrset_config32(bus, bdf, 0xf4, 0x80, 0x80);
pci_bus_clrset_config32(bus, bdf, 0xe2, 0x30, 0x30);
return 0;
}
static void pch_misc_init(struct udevice *dev)
{
/* Setup SLP signal assertion, SLP_S4=4s, SLP_S3=50ms */
dm_pci_clrset_config8(dev, GEN_PMCON_3, 3 << 4 | 1 << 10,
1 << 3 | 1 << 11 | 1 << 12);
/* Prepare sleep mode */
clrsetio_32(ACPI_BASE_ADDRESS + PM1_CNT, SLP_TYP, SCI_EN);
/* Setup NMI on errors, disable SERR */
clrsetio_8(0x61, 0xf0, 1 << 2);
/* Disable NMI sources */
setio_8(0x70, 1 << 7);
/* Indicate DRAM init done for MRC */
dm_pci_clrset_config8(dev, GEN_PMCON_2, 0, 1 << 7);
/* Clear status bits to prevent unexpected wake */
setbits_le32(RCB_REG(0x3310), 0x0000002f);
clrsetbits_le32(RCB_REG(0x3f02), 0x0000000f, 0);
/* Enable PCIe Relaxed Order */
setbits_le32(RCB_REG(0x2314), 1 << 31 | 1 << 7);
setbits_le32(RCB_REG(0x1114), 1 << 15 | 1 << 14);
/* Setup SERIRQ, enable continuous mode */
dm_pci_clrset_config8(dev, SERIRQ_CNTL, 0, 1 << 7 | 1 << 6);
};
static void pch_enable_ioapic(void)
{
u32 reg32;
/* Make sure this is a unique ID within system */
io_apic_set_id(0x04);
/* affirm full set of redirection table entries ("write once") */
reg32 = io_apic_read(0x01);
/* PCH-LP has 39 redirection entries */
reg32 &= ~0x00ff0000;
reg32 |= 0x00270000;
io_apic_write(0x01, reg32);
/*
* Select Boot Configuration register (0x03) and
* use Processor System Bus (0x01) to deliver interrupts.
*/
io_apic_write(0x03, 0x01);
}
/* Enable all requested GPE */
void enable_all_gpe(u32 set1, u32 set2, u32 set3, u32 set4)
{
outl(set1, ACPI_BASE_ADDRESS + GPE0_EN(GPE_31_0));
outl(set2, ACPI_BASE_ADDRESS + GPE0_EN(GPE_63_32));
outl(set3, ACPI_BASE_ADDRESS + GPE0_EN(GPE_94_64));
outl(set4, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD));
}
/*
* Enable GPIO SMI events - it would be good to put this in the GPIO driver
* but it would need a new driver operation.
*/
int enable_alt_smi(struct udevice *pch, u32 mask)
{
struct pch_lp_gpio_regs *regs;
u32 gpiobase;
int ret;
ret = pch_get_gpio_base(pch, &gpiobase);
if (ret) {
debug("%s: invalid GPIOBASE address (%08x)\n", __func__,
gpiobase);
return -EINVAL;
}
regs = (struct pch_lp_gpio_regs *)gpiobase;
setio_32(regs->alt_gpi_smi_en, mask);
return 0;
}
static int pch_power_options(struct udevice *dev)
{
int pwr_on_after_power_fail = MAINBOARD_POWER_OFF;
const char *state;
u32 enable[4];
u16 reg16;
int ret;
dm_pci_read_config16(dev, GEN_PMCON_3, &reg16);
reg16 &= 0xfffe;
switch (pwr_on_after_power_fail) {
case MAINBOARD_POWER_OFF:
reg16 |= 1;
state = "off";
break;
case MAINBOARD_POWER_ON:
reg16 &= ~1;
state = "on";
break;
case MAINBOARD_POWER_KEEP:
reg16 &= ~1;
state = "state keep";
break;
default:
state = "undefined";
}
dm_pci_write_config16(dev, GEN_PMCON_3, reg16);
debug("Set power %s after power failure.\n", state);
/* GPE setup based on device tree configuration */
ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
"intel,gpe0-en", enable, ARRAY_SIZE(enable));
if (ret)
return -EINVAL;
enable_all_gpe(enable[0], enable[1], enable[2], enable[3]);
/* SMI setup based on device tree configuration */
enable_alt_smi(dev, fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"intel,alt-gp-smi-enable", 0));
return 0;
}
/* Magic register settings for power management */
static void pch_pm_init_magic(struct udevice *dev)
{
dm_pci_write_config8(dev, 0xa9, 0x46);
clrbits_le32(RCB_REG(0x232c), 1),
setbits_le32(RCB_REG(0x1100), 0x0000c13f);
clrsetbits_le32(RCB_REG(0x2320), 0x60, 0x10);
writel(0x00012fff, RCB_REG(0x3314));
clrsetbits_le32(RCB_REG(0x3318), 0x000f0330, 0x0dcf0400);
writel(0x04000000, RCB_REG(0x3324));
writel(0x00041400, RCB_REG(0x3368));
writel(0x3f8ddbff, RCB_REG(0x3388));
writel(0x00007001, RCB_REG(0x33ac));
writel(0x00181900, RCB_REG(0x33b0));
writel(0x00060A00, RCB_REG(0x33c0));
writel(0x06200840, RCB_REG(0x33d0));
writel(0x01010101, RCB_REG(0x3a28));
writel(0x040c0404, RCB_REG(0x3a2c));
writel(0x9000000a, RCB_REG(0x3a9c));
writel(0x03808033, RCB_REG(0x2b1c));
writel(0x80000009, RCB_REG(0x2b34));
writel(0x022ddfff, RCB_REG(0x3348));
writel(0x00000001, RCB_REG(0x334c));
writel(0x0001c000, RCB_REG(0x3358));
writel(0x3f8ddbff, RCB_REG(0x3380));
writel(0x0001c7e1, RCB_REG(0x3384));
writel(0x0001c7e1, RCB_REG(0x338c));
writel(0x0001c000, RCB_REG(0x3398));
writel(0x00181900, RCB_REG(0x33a8));
writel(0x00080000, RCB_REG(0x33dc));
writel(0x00000001, RCB_REG(0x33e0));
writel(0x0000040c, RCB_REG(0x3a20));
writel(0x01010101, RCB_REG(0x3a24));
writel(0x01010101, RCB_REG(0x3a30));
dm_pci_clrset_config32(dev, 0xac, 0x00200000, 0);
setbits_le32(RCB_REG(0x0410), 0x00000003);
setbits_le32(RCB_REG(0x2618), 0x08000000);
setbits_le32(RCB_REG(0x2300), 0x00000002);
setbits_le32(RCB_REG(0x2600), 0x00000008);
writel(0x00007001, RCB_REG(0x33b4));
writel(0x022ddfff, RCB_REG(0x3350));
writel(0x00000001, RCB_REG(0x3354));
/* Power Optimizer */
setbits_le32(RCB_REG(0x33d4), 0x08000000);
/*
* This stops the LCD from turning on:
* setbits_le32(RCB_REG(0x33c8), 0x08000080);
*/
writel(0x0000883c, RCB_REG(0x2b10));
writel(0x1e0a4616, RCB_REG(0x2b14));
writel(0x40000005, RCB_REG(0x2b24));
writel(0x0005db01, RCB_REG(0x2b20));
writel(0x05145005, RCB_REG(0x3a80));
writel(0x00001005, RCB_REG(0x3a84));
setbits_le32(RCB_REG(0x33d4), 0x2fff2fb1);
setbits_le32(RCB_REG(0x33c8), 0x00008000);
};
static int pch_type(struct udevice *dev)
{
u16 type;
dm_pci_read_config16(dev, PCI_DEVICE_ID, &type);
return type;
}
/* Return 1 if PCH type is WildcatPoint */
static int pch_is_wpt(struct udevice *dev)
{
return ((pch_type(dev) & 0xfff0) == 0x9cc0) ? 1 : 0;
}
/* Return 1 if PCH type is WildcatPoint ULX */
static int pch_is_wpt_ulx(struct udevice *dev)
{
u16 lpcid = pch_type(dev);
switch (lpcid) {
case PCH_WPT_BDW_Y_SAMPLE:
case PCH_WPT_BDW_Y_PREMIUM:
case PCH_WPT_BDW_Y_BASE:
return 1;
}
return 0;
}
static u32 pch_read_soft_strap(int id)
{
clrbits_le32(SPI_REG(SPIBAR_FDOC), 0x00007ffc);
setbits_le32(SPI_REG(SPIBAR_FDOC), 0x00004000 | id * 4);
return readl(SPI_REG(SPIBAR_FDOD));
}
static void pch_enable_mphy(struct udevice *dev)
{
u32 data_and = 0xffffffff;
u32 data_or = (1 << 14) | (1 << 13) | (1 << 12);
data_or |= (1 << 0);
if (pch_is_wpt(dev)) {
data_and &= ~((1 << 7) | (1 << 6) | (1 << 3));
data_or |= (1 << 5) | (1 << 4);
if (pch_is_wpt_ulx(dev)) {
/* Check if SATA and USB3 MPHY are enabled */
u32 strap19 = pch_read_soft_strap(19);
strap19 &= ((1 << 31) | (1 << 30));
strap19 >>= 30;
if (strap19 == 3) {
data_or |= (1 << 3);
debug("Enable ULX MPHY PG control in single domain\n");
} else if (strap19 == 0) {
debug("Enable ULX MPHY PG control in split domains\n");
} else {
debug("Invalid PCH Soft Strap 19 configuration\n");
}
} else {
data_or |= (1 << 3);
}
}
pch_iobp_update(0xCF000000, data_and, data_or);
}
static void pch_init_deep_sx(bool deep_sx_enable_ac, bool deep_sx_enable_dc)
{
if (deep_sx_enable_ac) {
setbits_le32(RCB_REG(DEEP_S3_POL), DEEP_S3_EN_AC);
setbits_le32(RCB_REG(DEEP_S5_POL), DEEP_S5_EN_AC);
}
if (deep_sx_enable_dc) {
setbits_le32(RCB_REG(DEEP_S3_POL), DEEP_S3_EN_DC);
setbits_le32(RCB_REG(DEEP_S5_POL), DEEP_S5_EN_DC);
}
if (deep_sx_enable_ac || deep_sx_enable_dc) {
setbits_le32(RCB_REG(DEEP_SX_CONFIG),
DEEP_SX_WAKE_PIN_EN | DEEP_SX_GP27_PIN_EN);
}
}
/* Power Management init */
static void pch_pm_init(struct udevice *dev)
{
debug("PCH PM init\n");
pch_init_deep_sx(false, false);
pch_enable_mphy(dev);
pch_pm_init_magic(dev);
if (pch_is_wpt(dev)) {
setbits_le32(RCB_REG(0x33e0), 1 << 4 | 1 << 1);
setbits_le32(RCB_REG(0x2b1c), 1 << 22 | 1 << 14 | 1 << 13);
writel(0x16bf0002, RCB_REG(0x33e4));
setbits_le32(RCB_REG(0x33e4), 0x1);
}
pch_iobp_update(0xCA000000, ~0UL, 0x00000009);
/* Set RCBA 0x2b1c[29]=1 if DSP disabled */
if (readl(RCB_REG(FD)) & PCH_DISABLE_ADSPD)
setbits_le32(RCB_REG(0x2b1c), 1 << 29);
}
static void pch_cg_init(struct udevice *dev)
{
struct udevice *bus = pci_get_controller(dev);
u32 reg32;
u16 reg16;
ulong val;
/* DMI */
setbits_le32(RCB_REG(0x2234), 0xf);
dm_pci_read_config16(dev, GEN_PMCON_1, &reg16);
reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */
if (pch_is_wpt(dev))
reg16 &= ~(1 << 11);
else
reg16 |= 1 << 11;
reg16 |= 1 << 5 | 1 << 6 | 1 << 7 | 1 << 12;
reg16 |= 1 << 2; /* PCI CLKRUN# Enable */
dm_pci_write_config16(dev, GEN_PMCON_1, reg16);
/*
* RCBA + 0x2614[27:25,14:13,10,8] = 101,11,1,1
* RCBA + 0x2614[23:16] = 0x20
* RCBA + 0x2614[30:28] = 0x0
* RCBA + 0x2614[26] = 1 (IF 0:2.0@0x08 >= 0x0b)
*/
clrsetbits_le32(RCB_REG(0x2614), 0x64ff0000, 0x0a206500);
/* Check for 0:2.0@0x08 >= 0x0b */
pci_bus_read_config(bus, PCI_BDF(0, 0x2, 0), 0x8, &val, PCI_SIZE_8);
if (pch_is_wpt(dev) || val >= 0x0b)
setbits_le32(RCB_REG(0x2614), 1 << 26);
setbits_le32(RCB_REG(0x900), 0x0000031f);
reg32 = readl(RCB_REG(CG));
if (readl(RCB_REG(0x3454)) & (1 << 4))
reg32 &= ~(1 << 29); /* LPC Dynamic */
else
reg32 |= (1 << 29); /* LPC Dynamic */
reg32 |= 1 << 31; /* LP LPC */
reg32 |= 1 << 30; /* LP BLA */
if (readl(RCB_REG(0x3454)) & (1 << 4))
reg32 &= ~(1 << 29);
else
reg32 |= 1 << 29;
reg32 |= 1 << 28; /* GPIO Dynamic */
reg32 |= 1 << 27; /* HPET Dynamic */
reg32 |= 1 << 26; /* Generic Platform Event Clock */
if (readl(RCB_REG(BUC)) & PCH_DISABLE_GBE)
reg32 |= 1 << 23; /* GbE Static */
if (readl(RCB_REG(FD)) & PCH_DISABLE_HD_AUDIO)
reg32 |= 1 << 21; /* HDA Static */
reg32 |= 1 << 22; /* HDA Dynamic */
writel(reg32, RCB_REG(CG));
/* PCH-LP LPC */
if (pch_is_wpt(dev))
clrsetbits_le32(RCB_REG(0x3434), 0x1f, 0x17);
else
setbits_le32(RCB_REG(0x3434), 0x7);
/* SPI */
setbits_le32(RCB_REG(0x38c0), 0x3c07);
pch_iobp_update(0xCE00C000, ~1UL, 0x00000000);
}
static void systemagent_init(void)
{
/* Enable Power Aware Interrupt Routing */
clrsetbits_8(MCHBAR_REG(MCH_PAIR), 0x7, 0x4); /* Fixed Priority */
/*
* Set bits 0+1 of BIOS_RESET_CPL to indicate to the CPU
* that BIOS has initialized memory and power management
*/
setbits_8(MCHBAR_REG(BIOS_RESET_CPL), 3);
debug("Set BIOS_RESET_CPL\n");
/* Configure turbo power limits 1ms after reset complete bit */
mdelay(1);
cpu_set_power_limits(28);
}
static int broadwell_pch_init(struct udevice *dev)
{
int ret;
/* Enable upper 128 bytes of CMOS */
setbits_le32(RCB_REG(RC), 1 << 2);
/*
* TODO: TCO timer halt - this hangs
* setio_16(ACPI_BASE_ADDRESS + TCO1_CNT, TCO_TMR_HLT);
*/
/* Disable unused device (always) */
setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS);
pch_misc_init(dev);
/* Interrupt configuration */
pch_enable_ioapic();
/* Initialize power management */
ret = pch_power_options(dev);
if (ret)
return ret;
pch_pm_init(dev);
pch_cg_init(dev);
systemagent_init();
return 0;
}
static int broadwell_pch_probe(struct udevice *dev)
{
if (!(gd->flags & GD_FLG_RELOC))
return broadwell_pch_early_init(dev);
else
return broadwell_pch_init(dev);
}
static int broadwell_pch_get_spi_base(struct udevice *dev, ulong *sbasep)
{
u32 rcba;
dm_pci_read_config32(dev, PCH_RCBA, &rcba);
/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable */
rcba = rcba & 0xffffc000;
*sbasep = rcba + 0x3800;
return 0;
}
static int broadwell_set_spi_protect(struct udevice *dev, bool protect)
{
return lpc_set_spi_protect(dev, BIOS_CTRL, protect);
}
static int broadwell_get_gpio_base(struct udevice *dev, u32 *gbasep)
{
dm_pci_read_config32(dev, GPIO_BASE, gbasep);
*gbasep &= PCI_BASE_ADDRESS_IO_MASK;
return 0;
}
static const struct pch_ops broadwell_pch_ops = {
.get_spi_base = broadwell_pch_get_spi_base,
.set_spi_protect = broadwell_set_spi_protect,
.get_gpio_base = broadwell_get_gpio_base,
};
static const struct udevice_id broadwell_pch_ids[] = {
{ .compatible = "intel,broadwell-pch" },
{ }
};
U_BOOT_DRIVER(broadwell_pch) = {
.name = "broadwell_pch",
.id = UCLASS_PCH,
.of_match = broadwell_pch_ids,
.probe = broadwell_pch_probe,
.ops = &broadwell_pch_ops,
};