mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 08:43:07 +00:00
486f4d5a53
Bring the device tree binding document from Linux to u-boot Port from linux patches: Link: https://lore.kernel.org/r/20230207065826.285013-2-william.zhang@broadcom.com Link: https://lore.kernel.org/r/20230207065826.285013-3-william.zhang@broadcom.com Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
134 lines
3.8 KiB
YAML
134 lines
3.8 KiB
YAML
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-hsspi.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Broadcom Broadband SoC High Speed SPI controller
|
|
|
|
maintainers:
|
|
- William Zhang <william.zhang@broadcom.com>
|
|
- Kursad Oney <kursad.oney@broadcom.com>
|
|
- Jonas Gorski <jonas.gorski@gmail.com>
|
|
|
|
description: |
|
|
Broadcom Broadband SoC supports High Speed SPI master controller since the
|
|
early MIPS based chips such as BCM6328 and BCM63268. This initial rev 1.0
|
|
controller was carried over to recent ARM based chips, such as BCM63138,
|
|
BCM4908 and BCM6858. The old MIPS based chip should continue to use the
|
|
brcm,bcm6328-hsspi compatible string. The recent ARM based chip is required to
|
|
use the brcm,bcmbca-hsspi-v1.0 as part of its compatible string list as
|
|
defined below to match the specific chip along with ip revision info.
|
|
|
|
This rev 1.0 controller has a limitation that can not keep the chip select line
|
|
active between the SPI transfers within the same SPI message. This can
|
|
terminate the transaction to some SPI devices prematurely. The issue can be
|
|
worked around by either the controller's prepend mode or using the dummy chip
|
|
select workaround. Driver automatically picks the suitable mode based on
|
|
transfer type so it is transparent to the user.
|
|
|
|
The newer SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI
|
|
controller rev 1.1 that add the capability to allow the driver to control chip
|
|
select explicitly. This solves the issue in the old controller.
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- const: brcm,bcm6328-hsspi
|
|
- items:
|
|
- enum:
|
|
- brcm,bcm47622-hsspi
|
|
- brcm,bcm4908-hsspi
|
|
- brcm,bcm63138-hsspi
|
|
- brcm,bcm63146-hsspi
|
|
- brcm,bcm63148-hsspi
|
|
- brcm,bcm63158-hsspi
|
|
- brcm,bcm63178-hsspi
|
|
- brcm,bcm6846-hsspi
|
|
- brcm,bcm6856-hsspi
|
|
- brcm,bcm6858-hsspi
|
|
- brcm,bcm6878-hsspi
|
|
- const: brcm,bcmbca-hsspi-v1.0
|
|
- items:
|
|
- enum:
|
|
- brcm,bcm4912-hsspi
|
|
- brcm,bcm6756-hsspi
|
|
- brcm,bcm6813-hsspi
|
|
- brcm,bcm6855-hsspi
|
|
- const: brcm,bcmbca-hsspi-v1.1
|
|
|
|
reg:
|
|
items:
|
|
- description: main registers
|
|
- description: miscellaneous control registers
|
|
minItems: 1
|
|
|
|
reg-names:
|
|
items:
|
|
- const: hsspi
|
|
- const: spim-ctrl
|
|
minItems: 1
|
|
|
|
clocks:
|
|
items:
|
|
- description: SPI master reference clock
|
|
- description: SPI master pll clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: hsspi
|
|
- const: pll
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
- interrupts
|
|
|
|
allOf:
|
|
- $ref: spi-controller.yaml#
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- brcm,bcm6328-hsspi
|
|
- brcm,bcmbca-hsspi-v1.0
|
|
then:
|
|
properties:
|
|
reg:
|
|
maxItems: 1
|
|
reg-names:
|
|
maxItems: 1
|
|
else:
|
|
properties:
|
|
reg:
|
|
minItems: 2
|
|
maxItems: 2
|
|
reg-names:
|
|
minItems: 2
|
|
maxItems: 2
|
|
required:
|
|
- reg-names
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
spi@ff801000 {
|
|
compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
|
|
reg = <0xff801000 0x1000>,
|
|
<0xff802610 0x4>;
|
|
reg-names = "hsspi", "spim-ctrl";
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsspi>, <&hsspi_pll>;
|
|
clock-names = "hsspi", "pll";
|
|
num-cs = <8>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|