Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 18:59:44 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/firmware/ti_sci.h
Lokesh Vutla 826eb74015 firmware: Add support for querying msmc memory 
DMSC can use certain amount of msmc memory available in the
system. Also certain part of msmc memory can be marked as L3
cache using board config. But users might not know what size
is being used and the remaining available msmc memory. In order
to fix this TISCI protocol provides a messages that can query
the available msmc memory in the system. Add support for this
message.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-12 08:05:50 -04:00

1341 lines
49 KiB
C
Raw Blame History

/* SPDX-License-Identifier: BSD-3-Clause */
/*
* Texas Instruments System Control Interface (TISCI) Protocol
*
* Communication protocol with TI SCI hardware
* The system works in a message response protocol
* See: http://processors.wiki.ti.com/index.php/TISCI for details
*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
* Based on drivers/firmware/ti_sci.h from Linux.
*
*/
#ifndef __TI_SCI_H
#define __TI_SCI_H
/* Generic Messages */
#define TI_SCI_MSG_ENABLE_WDT 0x0000
#define TI_SCI_MSG_WAKE_RESET 0x0001
#define TI_SCI_MSG_VERSION 0x0002
#define TI_SCI_MSG_WAKE_REASON 0x0003
#define TI_SCI_MSG_GOODBYE 0x0004
#define TI_SCI_MSG_SYS_RESET 0x0005
#define TI_SCI_MSG_BOARD_CONFIG 0x000b
#define TI_SCI_MSG_BOARD_CONFIG_RM 0x000c
#define TI_SCI_MSG_BOARD_CONFIG_SECURITY 0x000d
#define TI_SCI_MSG_BOARD_CONFIG_PM 0x000e
#define TISCI_MSG_QUERY_MSMC 0x0020
/* Device requests */
#define TI_SCI_MSG_SET_DEVICE_STATE 0x0200
#define TI_SCI_MSG_GET_DEVICE_STATE 0x0201
#define TI_SCI_MSG_SET_DEVICE_RESETS 0x0202
/* Clock requests */
#define TI_SCI_MSG_SET_CLOCK_STATE 0x0100
#define TI_SCI_MSG_GET_CLOCK_STATE 0x0101
#define TI_SCI_MSG_SET_CLOCK_PARENT 0x0102
#define TI_SCI_MSG_GET_CLOCK_PARENT 0x0103
#define TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 0x0104
#define TI_SCI_MSG_SET_CLOCK_FREQ 0x010c
#define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d
#define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e
/* Processor Control Messages */
#define TISCI_MSG_PROC_REQUEST 0xc000
#define TISCI_MSG_PROC_RELEASE 0xc001
#define TISCI_MSG_PROC_HANDOVER 0xc005
#define TISCI_MSG_SET_PROC_BOOT_CONFIG 0xc100
#define TISCI_MSG_SET_PROC_BOOT_CTRL 0xc101
#define TISCI_MSG_PROC_AUTH_BOOT_IMIAGE 0xc120
#define TISCI_MSG_GET_PROC_BOOT_STATUS 0xc400
/* Resource Management Requests */
#define TI_SCI_MSG_GET_RESOURCE_RANGE 0x1500
/* NAVSS resource management */
/* Ringacc requests */
#define TI_SCI_MSG_RM_RING_CFG 0x1110
#define TI_SCI_MSG_RM_RING_GET_CFG 0x1111
/* PSI-L requests */
#define TI_SCI_MSG_RM_PSIL_PAIR 0x1280
#define TI_SCI_MSG_RM_PSIL_UNPAIR 0x1281
#define TI_SCI_MSG_RM_UDMAP_TX_ALLOC 0x1200
#define TI_SCI_MSG_RM_UDMAP_TX_FREE 0x1201
#define TI_SCI_MSG_RM_UDMAP_RX_ALLOC 0x1210
#define TI_SCI_MSG_RM_UDMAP_RX_FREE 0x1211
#define TI_SCI_MSG_RM_UDMAP_FLOW_CFG 0x1220
#define TI_SCI_MSG_RM_UDMAP_OPT_FLOW_CFG 0x1221
#define TISCI_MSG_RM_UDMAP_TX_CH_CFG 0x1205
#define TISCI_MSG_RM_UDMAP_TX_CH_GET_CFG 0x1206
#define TISCI_MSG_RM_UDMAP_RX_CH_CFG 0x1215
#define TISCI_MSG_RM_UDMAP_RX_CH_GET_CFG 0x1216
#define TISCI_MSG_RM_UDMAP_FLOW_CFG 0x1230
#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_CFG 0x1231
#define TISCI_MSG_RM_UDMAP_FLOW_GET_CFG 0x1232
#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG 0x1233
/**
* struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
* @type: Type of messages: One of TI_SCI_MSG* values
* @host: Host of the message
* @seq: Message identifier indicating a transfer sequence
* @flags: Flag for the message
*/
struct ti_sci_msg_hdr {
u16 type;
u8 host;
u8 seq;
#define TI_SCI_MSG_FLAG(val) (1 << (val))
#define TI_SCI_FLAG_REQ_GENERIC_NORESPONSE 0x0
#define TI_SCI_FLAG_REQ_ACK_ON_RECEIVED TI_SCI_MSG_FLAG(0)
#define TI_SCI_FLAG_REQ_ACK_ON_PROCESSED TI_SCI_MSG_FLAG(1)
#define TI_SCI_FLAG_RESP_GENERIC_NACK 0x0
#define TI_SCI_FLAG_RESP_GENERIC_ACK TI_SCI_MSG_FLAG(1)
/* Additional Flags */
u32 flags;
} __packed;
/**
* struct ti_sci_secure_msg_hdr - Header that prefixes all TISCI messages sent
* via secure transport.
* @checksum: crc16 checksum for the entire message
* @reserved: Reserved for future use.
*/
struct ti_sci_secure_msg_hdr {
u16 checksum;
u16 reserved;
} __packed;
/**
* struct ti_sci_msg_resp_version - Response for a message
* @hdr: Generic header
* @firmware_description: String describing the firmware
* @firmware_revision: Firmware revision
* @abi_major: Major version of the ABI that firmware supports
* @abi_minor: Minor version of the ABI that firmware supports
*
* In general, ABI version changes follow the rule that minor version increments
* are backward compatible. Major revision changes in ABI may not be
* backward compatible.
*
* Response to a generic message with message type TI_SCI_MSG_VERSION
*/
struct ti_sci_msg_resp_version {
struct ti_sci_msg_hdr hdr;
char firmware_description[32];
u16 firmware_revision;
u8 abi_major;
u8 abi_minor;
} __packed;
/**
* struct ti_sci_msg_req_reboot - Reboot the SoC
* @hdr: Generic Header
*
* Request type is TI_SCI_MSG_SYS_RESET, responded with a generic
* ACK/NACK message.
*/
struct ti_sci_msg_req_reboot {
struct ti_sci_msg_hdr hdr;
} __packed;
/**
* struct ti_sci_msg_board_config - Board configuration message
* @hdr: Generic Header
* @boardcfgp_low: Lower 32 bit of the pointer pointing to the board
* configuration data
* @boardcfgp_high: Upper 32 bit of the pointer pointing to the board
* configuration data
* @boardcfg_size: Size of board configuration data object
* Request type is TI_SCI_MSG_BOARD_CONFIG, responded with a generic
* ACK/NACK message.
*/
struct ti_sci_msg_board_config {
struct ti_sci_msg_hdr hdr;
u32 boardcfgp_low;
u32 boardcfgp_high;
u16 boardcfg_size;
} __packed;
/**
* struct ti_sci_msg_resp_query_msmc - Query msmc message response structure
* @hdr: Generic Header
* @msmc_start_low: Lower 32 bit of msmc start
* @msmc_start_high: Upper 32 bit of msmc start
* @msmc_end_low: Lower 32 bit of msmc end
* @msmc_end_high: Upper 32 bit of msmc end
*
* Response to a generic message with message type TISCI_MSG_QUERY_MSMC
*/
struct ti_sci_msg_resp_query_msmc {
struct ti_sci_msg_hdr hdr;
u32 msmc_start_low;
u32 msmc_start_high;
u32 msmc_end_low;
u32 msmc_end_high;
} __packed;
/**
* struct ti_sci_msg_req_set_device_state - Set the desired state of the device
* @hdr: Generic header
* @id: Indicates which device to modify
* @reserved: Reserved space in message, must be 0 for backward compatibility
* @state: The desired state of the device.
*
* Certain flags can also be set to alter the device state:
* + MSG_FLAG_DEVICE_WAKE_ENABLED - Configure the device to be a wake source.
* The meaning of this flag will vary slightly from device to device and from
* SoC to SoC but it generally allows the device to wake the SoC out of deep
* suspend states.
* + MSG_FLAG_DEVICE_RESET_ISO - Enable reset isolation for this device.
* + MSG_FLAG_DEVICE_EXCLUSIVE - Claim this device exclusively. When passed
* with STATE_RETENTION or STATE_ON, it will claim the device exclusively.
* If another host already has this device set to STATE_RETENTION or STATE_ON,
* the message will fail. Once successful, other hosts attempting to set
* STATE_RETENTION or STATE_ON will fail.
*
* Request type is TI_SCI_MSG_SET_DEVICE_STATE, responded with a generic
* ACK/NACK message.
*/
struct ti_sci_msg_req_set_device_state {
/* Additional hdr->flags options */
#define MSG_FLAG_DEVICE_WAKE_ENABLED TI_SCI_MSG_FLAG(8)
#define MSG_FLAG_DEVICE_RESET_ISO TI_SCI_MSG_FLAG(9)
#define MSG_FLAG_DEVICE_EXCLUSIVE TI_SCI_MSG_FLAG(10)
struct ti_sci_msg_hdr hdr;
u32 id;
u32 reserved;
#define MSG_DEVICE_SW_STATE_AUTO_OFF 0
#define MSG_DEVICE_SW_STATE_RETENTION 1
#define MSG_DEVICE_SW_STATE_ON 2
u8 state;
} __packed;
/**
* struct ti_sci_msg_req_get_device_state - Request to get device.
* @hdr: Generic header
* @id: Device Identifier
*
* Request type is TI_SCI_MSG_GET_DEVICE_STATE, responded device state
* information
*/
struct ti_sci_msg_req_get_device_state {
struct ti_sci_msg_hdr hdr;
u32 id;
} __packed;
/**
* struct ti_sci_msg_resp_get_device_state - Response to get device request.
* @hdr: Generic header
* @context_loss_count: Indicates how many times the device has lost context. A
* driver can use this monotonic counter to determine if the device has
* lost context since the last time this message was exchanged.
* @resets: Programmed state of the reset lines.
* @programmed_state: The state as programmed by set_device.
* - Uses the MSG_DEVICE_SW_* macros
* @current_state: The actual state of the hardware.
*
* Response to request TI_SCI_MSG_GET_DEVICE_STATE.
*/
struct ti_sci_msg_resp_get_device_state {
struct ti_sci_msg_hdr hdr;
u32 context_loss_count;
u32 resets;
u8 programmed_state;
#define MSG_DEVICE_HW_STATE_OFF 0
#define MSG_DEVICE_HW_STATE_ON 1
#define MSG_DEVICE_HW_STATE_TRANS 2
u8 current_state;
} __packed;
/**
* struct ti_sci_msg_req_set_device_resets - Set the desired resets
* configuration of the device
* @hdr: Generic header
* @id: Indicates which device to modify
* @resets: A bit field of resets for the device. The meaning, behavior,
* and usage of the reset flags are device specific. 0 for a bit
* indicates releasing the reset represented by that bit while 1
* indicates keeping it held.
*
* Request type is TI_SCI_MSG_SET_DEVICE_RESETS, responded with a generic
* ACK/NACK message.
*/
struct ti_sci_msg_req_set_device_resets {
struct ti_sci_msg_hdr hdr;
u32 id;
u32 resets;
} __packed;
/**
* struct ti_sci_msg_req_set_clock_state - Request to setup a Clock state
* @hdr: Generic Header, Certain flags can be set specific to the clocks:
* MSG_FLAG_CLOCK_ALLOW_SSC: Allow this clock to be modified
* via spread spectrum clocking.
* MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE: Allow this clock's
* frequency to be changed while it is running so long as it
* is within the min/max limits.
* MSG_FLAG_CLOCK_INPUT_TERM: Enable input termination, this
* is only applicable to clock inputs on the SoC pseudo-device.
* @dev_id: Device identifier this request is for
* @clk_id: Clock identifier for the device for this request.
* Each device has it's own set of clock inputs. This indexes
* which clock input to modify.
* @request_state: Request the state for the clock to be set to.
* MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock,
* it can be disabled, regardless of the state of the device
* MSG_CLOCK_SW_STATE_AUTO: Allow the System Controller to
* automatically manage the state of this clock. If the device
* is enabled, then the clock is enabled. If the device is set
* to off or retention, then the clock is internally set as not
* being required by the device.(default)
* MSG_CLOCK_SW_STATE_REQ: Configure the clock to be enabled,
* regardless of the state of the device.
*
* Normally, all required clocks are managed by TISCI entity, this is used
* only for specific control *IF* required. Auto managed state is
* MSG_CLOCK_SW_STATE_AUTO, in other states, TISCI entity assume remote
* will explicitly control.
*
* Request type is TI_SCI_MSG_SET_CLOCK_STATE, response is a generic
* ACK or NACK message.
*/
struct ti_sci_msg_req_set_clock_state {
/* Additional hdr->flags options */
#define MSG_FLAG_CLOCK_ALLOW_SSC TI_SCI_MSG_FLAG(8)
#define MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE TI_SCI_MSG_FLAG(9)
#define MSG_FLAG_CLOCK_INPUT_TERM TI_SCI_MSG_FLAG(10)
struct ti_sci_msg_hdr hdr;
u32 dev_id;
u8 clk_id;
#define MSG_CLOCK_SW_STATE_UNREQ 0
#define MSG_CLOCK_SW_STATE_AUTO 1
#define MSG_CLOCK_SW_STATE_REQ 2
u8 request_state;
} __packed;
/**
* struct ti_sci_msg_req_get_clock_state - Request for clock state
* @hdr: Generic Header
* @dev_id: Device identifier this request is for
* @clk_id: Clock identifier for the device for this request.
* Each device has it's own set of clock inputs. This indexes
* which clock input to get state of.
*
* Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state
* of the clock
*/
struct ti_sci_msg_req_get_clock_state {
struct ti_sci_msg_hdr hdr;
u32 dev_id;
u8 clk_id;
} __packed;
/**
* struct ti_sci_msg_resp_get_clock_state - Response to get clock state
* @hdr: Generic Header
* @programmed_state: Any programmed state of the clock. This is one of
* MSG_CLOCK_SW_STATE* values.
* @current_state: Current state of the clock. This is one of:
* MSG_CLOCK_HW_STATE_NOT_READY: Clock is not ready
* MSG_CLOCK_HW_STATE_READY: Clock is ready
*
* Response to TI_SCI_MSG_GET_CLOCK_STATE.
*/
struct ti_sci_msg_resp_get_clock_state {
struct ti_sci_msg_hdr hdr;
u8 programmed_state;
#define MSG_CLOCK_HW_STATE_NOT_READY 0
#define MSG_CLOCK_HW_STATE_READY 1
u8 current_state;
} __packed;
/**
* struct ti_sci_msg_req_set_clock_parent - Set the clock parent
* @hdr: Generic Header
* @dev_id: Device identifier this request is for
* @clk_id: Clock identifier for the device for this request.
* Each device has it's own set of clock inputs. This indexes
* which clock input to modify.
* @parent_id: The new clock parent is selectable by an index via this
* parameter.
*
* Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic
* ACK / NACK message.
*/
struct ti_sci_msg_req_set_clock_parent {
struct ti_sci_msg_hdr hdr;
u32 dev_id;
u8 clk_id;
u8 parent_id;
} __packed;
/**
* struct ti_sci_msg_req_get_clock_parent - Get the clock parent
* @hdr: Generic Header
* @dev_id: Device identifier this request is for
* @clk_id: Clock identifier for the device for this request.
* Each device has it's own set of clock inputs. This indexes
* which clock input to get the parent for.
*
* Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information
*/
struct ti_sci_msg_req_get_clock_parent {
struct ti_sci_msg_hdr hdr;
u32 dev_id;
u8 clk_id;
} __packed;
/**
* struct ti_sci_msg_resp_get_clock_parent - Response with clock parent
* @hdr: Generic Header
* @parent_id: The current clock parent
*
* Response to TI_SCI_MSG_GET_CLOCK_PARENT.
*/
struct ti_sci_msg_resp_get_clock_parent {
struct ti_sci_msg_hdr hdr;
u8 parent_id;
} __packed;
/**
* struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents
* @hdr: Generic header
* @dev_id: Device identifier this request is for
* @clk_id: Clock identifier for the device for this request.
*
* This request provides information about how many clock parent options
* are available for a given clock to a device. This is typically used
* for input clocks.
*
* Request type is TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, response is appropriate
* message, or NACK in case of inability to satisfy request.
*/
struct ti_sci_msg_req_get_clock_num_parents {
struct ti_sci_msg_hdr hdr;
u32 dev_id;
u8 clk_id;
} __packed;
/**
* struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents
* @hdr: Generic header
* @num_parents: Number of clock parents
*
* Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS
*/
struct ti_sci_msg_resp_get_clock_num_parents {
struct ti_sci_msg_hdr hdr;
u8 num_parents;
} __packed;
/**
* struct ti_sci_msg_req_query_clock_freq - Request to query a frequency
* @hdr: Generic Header
* @dev_id: Device identifier this request is for
* @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
* allowable programmed frequency and does not account for clock
* tolerances and jitter.
* @target_freq_hz: The target clock frequency. A frequency will be found
* as close to this target frequency as possible.
* @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
* allowable programmed frequency and does not account for clock
* tolerances and jitter.
* @clk_id: Clock identifier for the device for this request.
*
* NOTE: Normally clock frequency management is automatically done by TISCI
* entity. In case of specific requests, TISCI evaluates capability to achieve
* requested frequency within provided range and responds with
* result message.
*
* Request type is TI_SCI_MSG_QUERY_CLOCK_FREQ, response is appropriate message,
* or NACK in case of inability to satisfy request.
*/
struct ti_sci_msg_req_query_clock_freq {
struct ti_sci_msg_hdr hdr;
u32 dev_id;
u64 min_freq_hz;
u64 target_freq_hz;
u64 max_freq_hz;
u8 clk_id;
} __packed;
/**
* struct ti_sci_msg_resp_query_clock_freq - Response to a clock frequency query
* @hdr: Generic Header
* @freq_hz: Frequency that is the best match in Hz.
*
* Response to request type TI_SCI_MSG_QUERY_CLOCK_FREQ. NOTE: if the request
* cannot be satisfied, the message will be of type NACK.
*/
struct ti_sci_msg_resp_query_clock_freq {
struct ti_sci_msg_hdr hdr;
u64 freq_hz;
} __packed;
/**
* struct ti_sci_msg_req_set_clock_freq - Request to setup a clock frequency
* @hdr: Generic Header
* @dev_id: Device identifier this request is for
* @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
* allowable programmed frequency and does not account for clock
* tolerances and jitter.
* @target_freq_hz: The target clock frequency. The clock will be programmed
* at a rate as close to this target frequency as possible.
* @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
* allowable programmed frequency and does not account for clock
* tolerances and jitter.
* @clk_id: Clock identifier for the device for this request.
*
* NOTE: Normally clock frequency management is automatically done by TISCI
* entity. In case of specific requests, TISCI evaluates capability to achieve
* requested range and responds with success/failure message.
*
* This sets the desired frequency for a clock within an allowable
* range. This message will fail on an enabled clock unless
* MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE is set for the clock. Additionally,
* if other clocks have their frequency modified due to this message,
* they also must have the MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE or be disabled.
*
* Calling set frequency on a clock input to the SoC pseudo-device will
* inform the PMMC of that clock's frequency. Setting a frequency of
* zero will indicate the clock is disabled.
*
* Calling set frequency on clock outputs from the SoC pseudo-device will
* function similarly to setting the clock frequency on a device.
*
* Request type is TI_SCI_MSG_SET_CLOCK_FREQ, response is a generic ACK/NACK
* message.
*/
struct ti_sci_msg_req_set_clock_freq {
struct ti_sci_msg_hdr hdr;
u32 dev_id;
u64 min_freq_hz;
u64 target_freq_hz;
u64 max_freq_hz;
u8 clk_id;
} __packed;
/**
* struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency
* @hdr: Generic Header
* @dev_id: Device identifier this request is for
* @clk_id: Clock identifier for the device for this request.
*
* NOTE: Normally clock frequency management is automatically done by TISCI
* entity. In some cases, clock frequencies are configured by host.
*
* Request type is TI_SCI_MSG_GET_CLOCK_FREQ, responded with clock frequency
* that the clock is currently at.
*/
struct ti_sci_msg_req_get_clock_freq {
struct ti_sci_msg_hdr hdr;
u32 dev_id;
u8 clk_id;
} __packed;
/**
* struct ti_sci_msg_resp_get_clock_freq - Response of clock frequency request
* @hdr: Generic Header
* @freq_hz: Frequency that the clock is currently on, in Hz.
*
* Response to request type TI_SCI_MSG_GET_CLOCK_FREQ.
*/
struct ti_sci_msg_resp_get_clock_freq {
struct ti_sci_msg_hdr hdr;
u64 freq_hz;
} __packed;
#define TI_SCI_IRQ_SECONDARY_HOST_INVALID 0xff
/**
* struct ti_sci_msg_req_get_resource_range - Request to get a host's assigned
* range of resources.
* @hdr: Generic Header
* @type: Unique resource assignment type
* @subtype: Resource assignment subtype within the resource type.
* @secondary_host: Host processing entity to which the resources are
* allocated. This is required only when the destination
* host id id different from ti sci interface host id,
* else TI_SCI_IRQ_SECONDARY_HOST_INVALID can be passed.
*
* Request type is TI_SCI_MSG_GET_RESOURCE_RANGE. Responded with requested
* resource range which is of type TI_SCI_MSG_GET_RESOURCE_RANGE.
*/
struct ti_sci_msg_req_get_resource_range {
struct ti_sci_msg_hdr hdr;
#define MSG_RM_RESOURCE_TYPE_MASK GENMASK(9, 0)
#define MSG_RM_RESOURCE_SUBTYPE_MASK GENMASK(5, 0)
u16 type;
u8 subtype;
u8 secondary_host;
} __packed;
/**
* struct ti_sci_msg_resp_get_resource_range - Response to resource get range.
* @hdr: Generic Header
* @range_start: Start index of the resource range.
* @range_num: Number of resources in the range.
*
* Response to request TI_SCI_MSG_GET_RESOURCE_RANGE.
*/
struct ti_sci_msg_resp_get_resource_range {
struct ti_sci_msg_hdr hdr;
u16 range_start;
u16 range_num;
} __packed;
#define TISCI_ADDR_LOW_MASK GENMASK_ULL(31, 0)
#define TISCI_ADDR_HIGH_MASK GENMASK_ULL(63, 32)
#define TISCI_ADDR_HIGH_SHIFT 32
/**
* struct ti_sci_msg_req_proc_request - Request a processor
*
* @hdr: Generic Header
* @processor_id: ID of processor
*
* Request type is TISCI_MSG_PROC_REQUEST, response is a generic ACK/NACK
* message.
*/
struct ti_sci_msg_req_proc_request {
struct ti_sci_msg_hdr hdr;
u8 processor_id;
} __packed;
/**
* struct ti_sci_msg_req_proc_release - Release a processor
*
* @hdr: Generic Header
* @processor_id: ID of processor
*
* Request type is TISCI_MSG_PROC_RELEASE, response is a generic ACK/NACK
* message.
*/
struct ti_sci_msg_req_proc_release {
struct ti_sci_msg_hdr hdr;
u8 processor_id;
} __packed;
/**
* struct ti_sci_msg_req_proc_handover - Handover a processor to a host
*
* @hdr: Generic Header
* @processor_id: ID of processor
* @host_id: New Host we want to give control to
*
* Request type is TISCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK
* message.
*/
struct ti_sci_msg_req_proc_handover {
struct ti_sci_msg_hdr hdr;
u8 processor_id;
u8 host_id;
} __packed;
/* A53 Config Flags */
#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_EN 0x00000001
#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_NIDEN 0x00000002
#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPIDEN 0x00000004
#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPNIDEN 0x00000008
#define PROC_BOOT_CFG_FLAG_ARMV8_AARCH32 0x00000100
/* R5 Config Flags */
#define PROC_BOOT_CFG_FLAG_R5_DBG_EN 0x00000001
#define PROC_BOOT_CFG_FLAG_R5_DBG_NIDEN 0x00000002
#define PROC_BOOT_CFG_FLAG_R5_LOCKSTEP 0x00000100
#define PROC_BOOT_CFG_FLAG_R5_TEINIT 0x00000200
#define PROC_BOOT_CFG_FLAG_R5_NMFI_EN 0x00000400
#define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE 0x00000800
#define PROC_BOOT_CFG_FLAG_R5_BTCM_EN 0x00001000
#define PROC_BOOT_CFG_FLAG_R5_ATCM_EN 0x00002000
/**
* struct ti_sci_msg_req_set_proc_boot_config - Set Processor boot configuration
* @hdr: Generic Header
* @processor_id: ID of processor
* @bootvector_low: Lower 32bit (Little Endian) of boot vector
* @bootvector_high: Higher 32bit (Little Endian) of boot vector
* @config_flags_set: Optional Processor specific Config Flags to set.
* Setting a bit here implies required bit sets to 1.
* @config_flags_clear: Optional Processor specific Config Flags to clear.
* Setting a bit here implies required bit gets cleared.
*
* Request type is TISCI_MSG_SET_PROC_BOOT_CONFIG, response is a generic
* ACK/NACK message.
*/
struct ti_sci_msg_req_set_proc_boot_config {
struct ti_sci_msg_hdr hdr;
u8 processor_id;
u32 bootvector_low;
u32 bootvector_high;
u32 config_flags_set;
u32 config_flags_clear;
} __packed;
/* R5 Control Flags */
#define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT 0x00000001
/**
* struct ti_sci_msg_req_set_proc_boot_ctrl - Set Processor boot control flags
* @hdr: Generic Header
* @processor_id: ID of processor
* @control_flags_set: Optional Processor specific Control Flags to set.
* Setting a bit here implies required bit sets to 1.
* @control_flags_clear:Optional Processor specific Control Flags to clear.
* Setting a bit here implies required bit gets cleared.
*
* Request type is TISCI_MSG_SET_PROC_BOOT_CTRL, response is a generic ACK/NACK
* message.
*/
struct ti_sci_msg_req_set_proc_boot_ctrl {
struct ti_sci_msg_hdr hdr;
u8 processor_id;
u32 control_flags_set;
u32 control_flags_clear;
} __packed;
/**
* struct ti_sci_msg_req_proc_auth_start_image - Authenticate and start image
* @hdr: Generic Header
* @processor_id: ID of processor
* @cert_addr_low: Lower 32bit (Little Endian) of certificate
* @cert_addr_high: Higher 32bit (Little Endian) of certificate
*
* Request type is TISCI_MSG_PROC_AUTH_BOOT_IMAGE, response is a generic
* ACK/NACK message.
*/
struct ti_sci_msg_req_proc_auth_boot_image {
struct ti_sci_msg_hdr hdr;
u8 processor_id;
u32 cert_addr_low;
u32 cert_addr_high;
} __packed;
/**
* struct ti_sci_msg_req_get_proc_boot_status - Get processor boot status
* @hdr: Generic Header
* @processor_id: ID of processor
*
* Request type is TISCI_MSG_GET_PROC_BOOT_STATUS, response is appropriate
* message, or NACK in case of inability to satisfy request.
*/
struct ti_sci_msg_req_get_proc_boot_status {
struct ti_sci_msg_hdr hdr;
u8 processor_id;
} __packed;
/* ARMv8 Status Flags */
#define PROC_BOOT_STATUS_FLAG_ARMV8_WFE 0x00000001
#define PROC_BOOT_STATUS_FLAG_ARMV8_WFI 0x00000002
/* R5 Status Flags */
#define PROC_BOOT_STATUS_FLAG_R5_WFE 0x00000001
#define PROC_BOOT_STATUS_FLAG_R5_WFI 0x00000002
#define PROC_BOOT_STATUS_FLAG_R5_CLK_GATED 0x00000004
#define PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED 0x00000100
/**
* struct ti_sci_msg_resp_get_proc_boot_status - Processor boot status response
* @hdr: Generic Header
* @processor_id: ID of processor
* @bootvector_low: Lower 32bit (Little Endian) of boot vector
* @bootvector_high: Higher 32bit (Little Endian) of boot vector
* @config_flags: Optional Processor specific Config Flags set.
* @control_flags: Optional Processor specific Control Flags.
* @status_flags: Optional Processor specific Status Flags set.
*
* Response to TISCI_MSG_GET_PROC_BOOT_STATUS.
*/
struct ti_sci_msg_resp_get_proc_boot_status {
struct ti_sci_msg_hdr hdr;
u8 processor_id;
u32 bootvector_low;
u32 bootvector_high;
u32 config_flags;
u32 control_flags;
u32 status_flags;
} __packed;
/**
* struct ti_sci_msg_rm_ring_cfg_req - Configure a Navigator Subsystem ring
*
* Configures the non-real-time registers of a Navigator Subsystem ring.
* @hdr: Generic Header
* @valid_params: Bitfield defining validity of ring configuration parameters.
* The ring configuration fields are not valid, and will not be used for
* ring configuration, if their corresponding valid bit is zero.
* Valid bit usage:
* 0 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_lo
* 1 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_hi
* 2 - Valid bit for @tisci_msg_rm_ring_cfg_req count
* 3 - Valid bit for @tisci_msg_rm_ring_cfg_req mode
* 4 - Valid bit for @tisci_msg_rm_ring_cfg_req size
* 5 - Valid bit for @tisci_msg_rm_ring_cfg_req order_id
* @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
* @index: ring index to be configured.
* @addr_lo: 32 LSBs of ring base address to be programmed into the ring's
* RING_BA_LO register
* @addr_hi: 16 MSBs of ring base address to be programmed into the ring's
* RING_BA_HI register.
* @count: Number of ring elements. Must be even if mode is CREDENTIALS or QM
* modes.
* @mode: Specifies the mode the ring is to be configured.
* @size: Specifies encoded ring element size. To calculate the encoded size use
* the formula (log2(size_bytes) - 2), where size_bytes cannot be
* greater than 256.
* @order_id: Specifies the ring's bus order ID.
*/
struct ti_sci_msg_rm_ring_cfg_req {
struct ti_sci_msg_hdr hdr;
u32 valid_params;
u16 nav_id;
u16 index;
u32 addr_lo;
u32 addr_hi;
u32 count;
u8 mode;
u8 size;
u8 order_id;
} __packed;
/**
* struct ti_sci_msg_rm_ring_cfg_resp - Response to configuring a ring.
*
* @hdr: Generic Header
*/
struct ti_sci_msg_rm_ring_cfg_resp {
struct ti_sci_msg_hdr hdr;
} __packed;
/**
* struct ti_sci_msg_rm_ring_get_cfg_req - Get RA ring's configuration
*
* Gets the configuration of the non-real-time register fields of a ring. The
* host, or a supervisor of the host, who owns the ring must be the requesting
* host. The values of the non-real-time registers are returned in
* @ti_sci_msg_rm_ring_get_cfg_resp.
*
* @hdr: Generic Header
* @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
* @index: ring index.
*/
struct ti_sci_msg_rm_ring_get_cfg_req {
struct ti_sci_msg_hdr hdr;
u16 nav_id;
u16 index;
} __packed;
/**
* struct ti_sci_msg_rm_ring_get_cfg_resp - Ring get configuration response
*
* Response received by host processor after RM has handled
* @ti_sci_msg_rm_ring_get_cfg_req. The response contains the ring's
* non-real-time register values.
*
* @hdr: Generic Header
* @addr_lo: Ring 32 LSBs of base address
* @addr_hi: Ring 16 MSBs of base address.
* @count: Ring number of elements.
* @mode: Ring mode.
* @size: encoded Ring element size
* @order_id: ing order ID.
*/
struct ti_sci_msg_rm_ring_get_cfg_resp {
struct ti_sci_msg_hdr hdr;
u32 addr_lo;
u32 addr_hi;
u32 count;
u8 mode;
u8 size;
u8 order_id;
} __packed;
/**
* struct ti_sci_msg_psil_pair - Pairs a PSI-L source thread to a destination
* thread
* @hdr: Generic Header
* @nav_id: SoC Navigator Subsystem device ID whose PSI-L config proxy is
* used to pair the source and destination threads.
* @src_thread: PSI-L source thread ID within the PSI-L System thread map.
*
* UDMAP transmit channels mapped to source threads will have their
* TCHAN_THRD_ID register programmed with the destination thread if the pairing
* is successful.
* @dst_thread: PSI-L destination thread ID within the PSI-L System thread map.
* PSI-L destination threads start at index 0x8000. The request is NACK'd if
* the destination thread is not greater than or equal to 0x8000.
*
* UDMAP receive channels mapped to destination threads will have their
* RCHAN_THRD_ID register programmed with the source thread if the pairing
* is successful.
*
* Request type is TI_SCI_MSG_RM_PSIL_PAIR, response is a generic ACK or NACK
* message.
*/
struct ti_sci_msg_psil_pair {
struct ti_sci_msg_hdr hdr;
u32 nav_id;
u32 src_thread;
u32 dst_thread;
} __packed;
/**
* struct ti_sci_msg_psil_unpair - Unpairs a PSI-L source thread from a
* destination thread
* @hdr: Generic Header
* @nav_id: SoC Navigator Subsystem device ID whose PSI-L config proxy is
* used to unpair the source and destination threads.
* @src_thread: PSI-L source thread ID within the PSI-L System thread map.
*
* UDMAP transmit channels mapped to source threads will have their
* TCHAN_THRD_ID register cleared if the unpairing is successful.
*
* @dst_thread: PSI-L destination thread ID within the PSI-L System thread map.
* PSI-L destination threads start at index 0x8000. The request is NACK'd if
* the destination thread is not greater than or equal to 0x8000.
*
* UDMAP receive channels mapped to destination threads will have their
* RCHAN_THRD_ID register cleared if the unpairing is successful.
*
* Request type is TI_SCI_MSG_RM_PSIL_UNPAIR, response is a generic ACK or NACK
* message.
*/
struct ti_sci_msg_psil_unpair {
struct ti_sci_msg_hdr hdr;
u32 nav_id;
u32 src_thread;
u32 dst_thread;
} __packed;
/**
* Configures a Navigator Subsystem UDMAP transmit channel
*
* Configures the non-real-time registers of a Navigator Subsystem UDMAP
* transmit channel. The channel index must be assigned to the host defined
* in the TISCI header via the RM board configuration resource assignment
* range list.
*
* @hdr: Generic Header
*
* @valid_params: Bitfield defining validity of tx channel configuration
* parameters. The tx channel configuration fields are not valid, and will not
* be used for ch configuration, if their corresponding valid bit is zero.
* Valid bit usage:
* 0 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_pause_on_err
* 1 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_atype
* 2 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_chan_type
* 3 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_fetch_size
* 4 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::txcq_qnum
* 5 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_priority
* 6 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_qos
* 7 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_orderid
* 8 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_sched_priority
* 9 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_einfo
* 10 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_pswords
* 11 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_supr_tdpkt
* 12 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_credit_count
* 13 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::fdepth
*
* @nav_id: SoC device ID of Navigator Subsystem where tx channel is located
*
* @index: UDMAP transmit channel index.
*
* @tx_pause_on_err: UDMAP transmit channel pause on error configuration to
* be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG
* register.
*
* @tx_filt_einfo: UDMAP transmit channel extended packet information passing
* configuration to be programmed into the tx_filt_einfo field of the
* channel's TCHAN_TCFG register.
*
* @tx_filt_pswords: UDMAP transmit channel protocol specific word passing
* configuration to be programmed into the tx_filt_pswords field of the
* channel's TCHAN_TCFG register.
*
* @tx_atype: UDMAP transmit channel non Ring Accelerator access pointer
* interpretation configuration to be programmed into the tx_atype field of
* the channel's TCHAN_TCFG register.
*
* @tx_chan_type: UDMAP transmit channel functional channel type and work
* passing mechanism configuration to be programmed into the tx_chan_type
* field of the channel's TCHAN_TCFG register.
*
* @tx_supr_tdpkt: UDMAP transmit channel teardown packet generation suppression
* configuration to be programmed into the tx_supr_tdpkt field of the channel's
* TCHAN_TCFG register.
*
* @tx_fetch_size: UDMAP transmit channel number of 32-bit descriptor words to
* fetch configuration to be programmed into the tx_fetch_size field of the
* channel's TCHAN_TCFG register. The user must make sure to set the maximum
* word count that can pass through the channel for any allowed descriptor type.
*
* @tx_credit_count: UDMAP transmit channel transfer request credit count
* configuration to be programmed into the count field of the TCHAN_TCREDIT
* register. Specifies how many credits for complete TRs are available.
*
* @txcq_qnum: UDMAP transmit channel completion queue configuration to be
* programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified
* completion queue must be assigned to the host, or a subordinate of the host,
* requesting configuration of the transmit channel.
*
* @tx_priority: UDMAP transmit channel transmit priority value to be programmed
* into the priority field of the channel's TCHAN_TPRI_CTRL register.
*
* @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the
* qos field of the channel's TCHAN_TPRI_CTRL register.
*
* @tx_orderid: UDMAP transmit channel bus order id value to be programmed into
* the orderid field of the channel's TCHAN_TPRI_CTRL register.
*
* @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed
* into the fdepth field of the TCHAN_TFIFO_DEPTH register. Sets the number of
* Tx FIFO bytes which are allowed to be stored for the channel. Check the UDMAP
* section of the TRM for restrictions regarding this parameter.
*
* @tx_sched_priority: UDMAP transmit channel tx scheduling priority
* configuration to be programmed into the priority field of the channel's
* TCHAN_TST_SCHED register.
*/
struct ti_sci_msg_rm_udmap_tx_ch_cfg_req {
struct ti_sci_msg_hdr hdr;
u32 valid_params;
u16 nav_id;
u16 index;
u8 tx_pause_on_err;
u8 tx_filt_einfo;
u8 tx_filt_pswords;
u8 tx_atype;
u8 tx_chan_type;
u8 tx_supr_tdpkt;
u16 tx_fetch_size;
u8 tx_credit_count;
u16 txcq_qnum;
u8 tx_priority;
u8 tx_qos;
u8 tx_orderid;
u16 fdepth;
u8 tx_sched_priority;
} __packed;
/**
* Response to configuring a UDMAP transmit channel.
*
* @hdr: Standard TISCI header
*/
struct ti_sci_msg_rm_udmap_tx_ch_cfg_resp {
struct ti_sci_msg_hdr hdr;
} __packed;
/**
* Configures a Navigator Subsystem UDMAP receive channel
*
* Configures the non-real-time registers of a Navigator Subsystem UDMAP
* receive channel. The channel index must be assigned to the host defined
* in the TISCI header via the RM board configuration resource assignment
* range list.
*
* @hdr: Generic Header
*
* @valid_params: Bitfield defining validity of rx channel configuration
* parameters.
* The rx channel configuration fields are not valid, and will not be used for
* ch configuration, if their corresponding valid bit is zero.
* Valid bit usage:
* 0 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_pause_on_err
* 1 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_atype
* 2 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_chan_type
* 3 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_fetch_size
* 4 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rxcq_qnum
* 5 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_priority
* 6 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_qos
* 7 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_orderid
* 8 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_sched_priority
* 9 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_start
* 10 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_cnt
* 11 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_short
* 12 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_long
*
* @nav_id: SoC device ID of Navigator Subsystem where rx channel is located
*
* @index: UDMAP receive channel index.
*
* @rx_fetch_size: UDMAP receive channel number of 32-bit descriptor words to
* fetch configuration to be programmed into the rx_fetch_size field of the
* channel's RCHAN_RCFG register.
*
* @rxcq_qnum: UDMAP receive channel completion queue configuration to be
* programmed into the rxcq_qnum field of the RCHAN_RCQ register.
* The specified completion queue must be assigned to the host, or a subordinate
* of the host, requesting configuration of the receive channel.
*
* @rx_priority: UDMAP receive channel receive priority value to be programmed
* into the priority field of the channel's RCHAN_RPRI_CTRL register.
*
* @rx_qos: UDMAP receive channel receive qos value to be programmed into the
* qos field of the channel's RCHAN_RPRI_CTRL register.
*
* @rx_orderid: UDMAP receive channel bus order id value to be programmed into
* the orderid field of the channel's RCHAN_RPRI_CTRL register.
*
* @rx_sched_priority: UDMAP receive channel rx scheduling priority
* configuration to be programmed into the priority field of the channel's
* RCHAN_RST_SCHED register.
*
* @flowid_start: UDMAP receive channel additional flows starting index
* configuration to program into the flow_start field of the RCHAN_RFLOW_RNG
* register. Specifies the starting index for flow IDs the receive channel is to
* make use of beyond the default flow. flowid_start and @ref flowid_cnt must be
* set as valid and configured together. The starting flow ID set by
* @ref flowid_cnt must be a flow index within the Navigator Subsystem's subset
* of flows beyond the default flows statically mapped to receive channels.
* The additional flows must be assigned to the host, or a subordinate of the
* host, requesting configuration of the receive channel.
*
* @flowid_cnt: UDMAP receive channel additional flows count configuration to
* program into the flowid_cnt field of the RCHAN_RFLOW_RNG register.
* This field specifies how many flow IDs are in the additional contiguous range
* of legal flow IDs for the channel. @ref flowid_start and flowid_cnt must be
* set as valid and configured together. Disabling the valid_params field bit
* for flowid_cnt indicates no flow IDs other than the default are to be
* allocated and used by the receive channel. @ref flowid_start plus flowid_cnt
* cannot be greater than the number of receive flows in the receive channel's
* Navigator Subsystem. The additional flows must be assigned to the host, or a
* subordinate of the host, requesting configuration of the receive channel.
*
* @rx_pause_on_err: UDMAP receive channel pause on error configuration to be
* programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG
* register.
*
* @rx_atype: UDMAP receive channel non Ring Accelerator access pointer
* interpretation configuration to be programmed into the rx_atype field of the
* channel's RCHAN_RCFG register.
*
* @rx_chan_type: UDMAP receive channel functional channel type and work passing
* mechanism configuration to be programmed into the rx_chan_type field of the
* channel's RCHAN_RCFG register.
*
* @rx_ignore_short: UDMAP receive channel short packet treatment configuration
* to be programmed into the rx_ignore_short field of the RCHAN_RCFG register.
*
* @rx_ignore_long: UDMAP receive channel long packet treatment configuration to
* be programmed into the rx_ignore_long field of the RCHAN_RCFG register.
*/
struct ti_sci_msg_rm_udmap_rx_ch_cfg_req {
struct ti_sci_msg_hdr hdr;
u32 valid_params;
u16 nav_id;
u16 index;
u16 rx_fetch_size;
u16 rxcq_qnum;
u8 rx_priority;
u8 rx_qos;
u8 rx_orderid;
u8 rx_sched_priority;
u16 flowid_start;
u16 flowid_cnt;
u8 rx_pause_on_err;
u8 rx_atype;
u8 rx_chan_type;
u8 rx_ignore_short;
u8 rx_ignore_long;
} __packed;
/**
* Response to configuring a UDMAP receive channel.
*
* @hdr: Standard TISCI header
*/
struct ti_sci_msg_rm_udmap_rx_ch_cfg_resp {
struct ti_sci_msg_hdr hdr;
} __packed;
/**
* Configures a Navigator Subsystem UDMAP receive flow
*
* Configures a Navigator Subsystem UDMAP receive flow's registers.
* Configuration does not include the flow registers which handle size-based
* free descriptor queue routing.
*
* The flow index must be assigned to the host defined in the TISCI header via
* the RM board configuration resource assignment range list.
*
* @hdr: Standard TISCI header
*
* @valid_params
* Bitfield defining validity of rx flow configuration parameters. The
* rx flow configuration fields are not valid, and will not be used for flow
* configuration, if their corresponding valid bit is zero. Valid bit usage:
* 0 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_einfo_present
* 1 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_psinfo_present
* 2 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_error_handling
* 3 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_desc_type
* 4 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_sop_offset
* 5 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_qnum
* 6 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi
* 7 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo
* 8 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi
* 9 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo
* 10 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi_sel
* 11 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo_sel
* 12 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi_sel
* 13 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo_sel
* 14 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq0_sz0_qnum
* 15 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq1_sz0_qnum
* 16 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq2_sz0_qnum
* 17 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq3_sz0_qnum
* 18 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_ps_location
*
* @nav_id: SoC device ID of Navigator Subsystem from which the receive flow is
* allocated
*
* @flow_index: UDMAP receive flow index for non-optional configuration.
*
* @rx_einfo_present:
* UDMAP receive flow extended packet info present configuration to be
* programmed into the rx_einfo_present field of the flow's RFLOW_RFA register.
*
* @rx_psinfo_present:
* UDMAP receive flow PS words present configuration to be programmed into the
* rx_psinfo_present field of the flow's RFLOW_RFA register.
*
* @rx_error_handling:
* UDMAP receive flow error handling configuration to be programmed into the
* rx_error_handling field of the flow's RFLOW_RFA register.
*
* @rx_desc_type:
* UDMAP receive flow descriptor type configuration to be programmed into the
* rx_desc_type field field of the flow's RFLOW_RFA register.
*
* @rx_sop_offset:
* UDMAP receive flow start of packet offset configuration to be programmed
* into the rx_sop_offset field of the RFLOW_RFA register. See the UDMAP
* section of the TRM for more information on this setting. Valid values for
* this field are 0-255 bytes.
*
* @rx_dest_qnum:
* UDMAP receive flow destination queue configuration to be programmed into the
* rx_dest_qnum field of the flow's RFLOW_RFA register. The specified
* destination queue must be valid within the Navigator Subsystem and must be
* owned by the host, or a subordinate of the host, requesting allocation and
* configuration of the receive flow.
*
* @rx_src_tag_hi:
* UDMAP receive flow source tag high byte constant configuration to be
* programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register.
* See the UDMAP section of the TRM for more information on this setting.
*
* @rx_src_tag_lo:
* UDMAP receive flow source tag low byte constant configuration to be
* programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register.
* See the UDMAP section of the TRM for more information on this setting.
*
* @rx_dest_tag_hi:
* UDMAP receive flow destination tag high byte constant configuration to be
* programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register.
* See the UDMAP section of the TRM for more information on this setting.
*
* @rx_dest_tag_lo:
* UDMAP receive flow destination tag low byte constant configuration to be
* programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register.
* See the UDMAP section of the TRM for more information on this setting.
*
* @rx_src_tag_hi_sel:
* UDMAP receive flow source tag high byte selector configuration to be
* programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register. See
* the UDMAP section of the TRM for more information on this setting.
*
* @rx_src_tag_lo_sel:
* UDMAP receive flow source tag low byte selector configuration to be
* programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register. See
* the UDMAP section of the TRM for more information on this setting.
*
* @rx_dest_tag_hi_sel:
* UDMAP receive flow destination tag high byte selector configuration to be
* programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register. See
* the UDMAP section of the TRM for more information on this setting.
*
* @rx_dest_tag_lo_sel:
* UDMAP receive flow destination tag low byte selector configuration to be
* programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register. See
* the UDMAP section of the TRM for more information on this setting.
*
* @rx_fdq0_sz0_qnum:
* UDMAP receive flow free descriptor queue 0 configuration to be programmed
* into the rx_fdq0_sz0_qnum field of the flow's RFLOW_RFD register. See the
* UDMAP section of the TRM for more information on this setting. The specified
* free queue must be valid within the Navigator Subsystem and must be owned
* by the host, or a subordinate of the host, requesting allocation and
* configuration of the receive flow.
*
* @rx_fdq1_qnum:
* UDMAP receive flow free descriptor queue 1 configuration to be programmed
* into the rx_fdq1_qnum field of the flow's RFLOW_RFD register. See the
* UDMAP section of the TRM for more information on this setting. The specified
* free queue must be valid within the Navigator Subsystem and must be owned
* by the host, or a subordinate of the host, requesting allocation and
* configuration of the receive flow.
*
* @rx_fdq2_qnum:
* UDMAP receive flow free descriptor queue 2 configuration to be programmed
* into the rx_fdq2_qnum field of the flow's RFLOW_RFE register. See the
* UDMAP section of the TRM for more information on this setting. The specified
* free queue must be valid within the Navigator Subsystem and must be owned
* by the host, or a subordinate of the host, requesting allocation and
* configuration of the receive flow.
*
* @rx_fdq3_qnum:
* UDMAP receive flow free descriptor queue 3 configuration to be programmed
* into the rx_fdq3_qnum field of the flow's RFLOW_RFE register. See the
* UDMAP section of the TRM for more information on this setting. The specified
* free queue must be valid within the Navigator Subsystem and must be owned
* by the host, or a subordinate of the host, requesting allocation and
* configuration of the receive flow.
*
* @rx_ps_location:
* UDMAP receive flow PS words location configuration to be programmed into the
* rx_ps_location field of the flow's RFLOW_RFA register.
*/
struct ti_sci_msg_rm_udmap_flow_cfg_req {
struct ti_sci_msg_hdr hdr;
u32 valid_params;
u16 nav_id;
u16 flow_index;
u8 rx_einfo_present;
u8 rx_psinfo_present;
u8 rx_error_handling;
u8 rx_desc_type;
u16 rx_sop_offset;
u16 rx_dest_qnum;
u8 rx_src_tag_hi;
u8 rx_src_tag_lo;
u8 rx_dest_tag_hi;
u8 rx_dest_tag_lo;
u8 rx_src_tag_hi_sel;
u8 rx_src_tag_lo_sel;
u8 rx_dest_tag_hi_sel;
u8 rx_dest_tag_lo_sel;
u16 rx_fdq0_sz0_qnum;
u16 rx_fdq1_qnum;
u16 rx_fdq2_qnum;
u16 rx_fdq3_qnum;
u8 rx_ps_location;
} __packed;
/**
* Response to configuring a Navigator Subsystem UDMAP receive flow
*
* @hdr: Standard TISCI header
*/
struct ti_sci_msg_rm_udmap_flow_cfg_resp {
struct ti_sci_msg_hdr hdr;
} __packed;
#endif /* __TI_SCI_H */
Reference in a new issue View git blame Copy permalink