u-boot/include/power/stpmu1.h
Tom Rini 4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00

84 lines
1.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
#ifndef __PMIC_STPMU1_H_
#define __PMIC_STPMU1_H_
#define STPMU1_MASK_RESET_BUCK 0x18
#define STPMU1_BUCKX_CTRL_REG(buck) (0x20 + (buck))
#define STPMU1_VREF_CTRL_REG 0x24
#define STPMU1_LDOX_CTRL_REG(ldo) (0x25 + (ldo))
#define STPMU1_USB_CTRL_REG 0x40
#define STPMU1_NVM_USER_STATUS_REG 0xb8
#define STPMU1_NVM_USER_CONTROL_REG 0xb9
#define STPMU1_MASK_RESET_BUCK3 BIT(2)
#define STPMU1_BUCK_EN BIT(0)
#define STPMU1_BUCK_MODE BIT(1)
#define STPMU1_BUCK_OUTPUT_MASK GENMASK(7, 2)
#define STPMU1_BUCK_OUTPUT_SHIFT 2
#define STPMU1_BUCK2_1200000V (24 << STPMU1_BUCK_OUTPUT_SHIFT)
#define STPMU1_BUCK2_1350000V (30 << STPMU1_BUCK_OUTPUT_SHIFT)
#define STPMU1_BUCK3_1800000V (39 << STPMU1_BUCK_OUTPUT_SHIFT)
#define STPMU1_VREF_EN BIT(0)
#define STPMU1_LDO_EN BIT(0)
#define STPMU1_LDO12356_OUTPUT_MASK GENMASK(6, 2)
#define STPMU1_LDO12356_OUTPUT_SHIFT 2
#define STPMU1_LDO3_MODE BIT(7)
#define STPMU1_LDO3_DDR_SEL 31
#define STPMU1_LDO3_1800000 (9 << STPMU1_LDO12356_OUTPUT_SHIFT)
#define STPMU1_LDO4_UV 3300000
#define STPMU1_USB_BOOST_EN BIT(0)
#define STPMU1_USB_PWR_SW_EN GENMASK(2, 1)
#define STPMU1_NVM_USER_CONTROL_PROGRAM BIT(0)
#define STPMU1_NVM_USER_CONTROL_READ BIT(1)
#define STPMU1_NVM_USER_STATUS_BUSY BIT(0)
#define STPMU1_NVM_USER_STATUS_ERROR BIT(1)
#define STPMU1_DEFAULT_START_UP_DELAY_MS 1
#define STPMU1_USB_BOOST_START_UP_DELAY_MS 10
enum {
STPMU1_BUCK1,
STPMU1_BUCK2,
STPMU1_BUCK3,
STPMU1_BUCK4,
STPMU1_MAX_BUCK,
};
enum {
STPMU1_BUCK_MODE_HP,
STPMU1_BUCK_MODE_LP,
};
enum {
STPMU1_LDO1,
STPMU1_LDO2,
STPMU1_LDO3,
STPMU1_LDO4,
STPMU1_LDO5,
STPMU1_LDO6,
STPMU1_MAX_LDO,
};
enum {
STPMU1_LDO_MODE_NORMAL,
STPMU1_LDO_MODE_BYPASS,
STPMU1_LDO_MODE_SINK_SOURCE,
};
enum {
STPMU1_PWR_SW1,
STPMU1_PWR_SW2,
STPMU1_MAX_PWR_SW,
};
#endif