mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
544 lines
14 KiB
C
544 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <asm/global_data.h>
|
|
|
|
/* Memory test
|
|
*
|
|
* General observations:
|
|
* o The recommended test sequence is to test the data lines: if they are
|
|
* broken, nothing else will work properly. Then test the address
|
|
* lines. Finally, test the cells in the memory now that the test
|
|
* program knows that the address and data lines work properly.
|
|
* This sequence also helps isolate and identify what is faulty.
|
|
*
|
|
* o For the address line test, it is a good idea to use the base
|
|
* address of the lowest memory location, which causes a '1' bit to
|
|
* walk through a field of zeros on the address lines and the highest
|
|
* memory location, which causes a '0' bit to walk through a field of
|
|
* '1's on the address line.
|
|
*
|
|
* o Floating buses can fool memory tests if the test routine writes
|
|
* a value and then reads it back immediately. The problem is, the
|
|
* write will charge the residual capacitance on the data bus so the
|
|
* bus retains its state briefely. When the test program reads the
|
|
* value back immediately, the capacitance of the bus can allow it
|
|
* to read back what was written, even though the memory circuitry
|
|
* is broken. To avoid this, the test program should write a test
|
|
* pattern to the target location, write a different pattern elsewhere
|
|
* to charge the residual capacitance in a differnt manner, then read
|
|
* the target location back.
|
|
*
|
|
* o Always read the target location EXACTLY ONCE and save it in a local
|
|
* variable. The problem with reading the target location more than
|
|
* once is that the second and subsequent reads may work properly,
|
|
* resulting in a failed test that tells the poor technician that
|
|
* "Memory error at 00000000, wrote aaaaaaaa, read aaaaaaaa" which
|
|
* doesn't help him one bit and causes puzzled phone calls. Been there,
|
|
* done that.
|
|
*
|
|
* Data line test:
|
|
* ---------------
|
|
* This tests data lines for shorts and opens by forcing adjacent data
|
|
* to opposite states. Because the data lines could be routed in an
|
|
* arbitrary manner the must ensure test patterns ensure that every case
|
|
* is tested. By using the following series of binary patterns every
|
|
* combination of adjacent bits is test regardless of routing.
|
|
*
|
|
* ...101010101010101010101010
|
|
* ...110011001100110011001100
|
|
* ...111100001111000011110000
|
|
* ...111111110000000011111111
|
|
*
|
|
* Carrying this out, gives us six hex patterns as follows:
|
|
*
|
|
* 0xaaaaaaaaaaaaaaaa
|
|
* 0xcccccccccccccccc
|
|
* 0xf0f0f0f0f0f0f0f0
|
|
* 0xff00ff00ff00ff00
|
|
* 0xffff0000ffff0000
|
|
* 0xffffffff00000000
|
|
*
|
|
* To test for short and opens to other signals on our boards, we
|
|
* simply test with the 1's complemnt of the paterns as well, resulting
|
|
* in twelve patterns total.
|
|
*
|
|
* After writing a test pattern. a special pattern 0x0123456789ABCDEF is
|
|
* written to a different address in case the data lines are floating.
|
|
* Thus, if a byte lane fails, you will see part of the special
|
|
* pattern in that byte lane when the test runs. For example, if the
|
|
* xx__xxxxxxxxxxxx byte line fails, you will see aa23aaaaaaaaaaaa
|
|
* (for the 'a' test pattern).
|
|
*
|
|
* Address line test:
|
|
* ------------------
|
|
* This function performs a test to verify that all the address lines
|
|
* hooked up to the RAM work properly. If there is an address line
|
|
* fault, it usually shows up as two different locations in the address
|
|
* map (related by the faulty address line) mapping to one physical
|
|
* memory storage location. The artifact that shows up is writing to
|
|
* the first location "changes" the second location.
|
|
*
|
|
* To test all address lines, we start with the given base address and
|
|
* xor the address with a '1' bit to flip one address line. For each
|
|
* test, we shift the '1' bit left to test the next address line.
|
|
*
|
|
* In the actual code, we start with address sizeof(ulong) since our
|
|
* test pattern we use is a ulong and thus, if we tried to test lower
|
|
* order address bits, it wouldn't work because our pattern would
|
|
* overwrite itself.
|
|
*
|
|
* Example for a 4 bit address space with the base at 0000:
|
|
* 0000 <- base
|
|
* 0001 <- test 1
|
|
* 0010 <- test 2
|
|
* 0100 <- test 3
|
|
* 1000 <- test 4
|
|
* Example for a 4 bit address space with the base at 0010:
|
|
* 0010 <- base
|
|
* 0011 <- test 1
|
|
* 0000 <- (below the base address, skipped)
|
|
* 0110 <- test 2
|
|
* 1010 <- test 3
|
|
*
|
|
* The test locations are successively tested to make sure that they are
|
|
* not "mirrored" onto the base address due to a faulty address line.
|
|
* Note that the base and each test location are related by one address
|
|
* line flipped. Note that the base address need not be all zeros.
|
|
*
|
|
* Memory tests 1-4:
|
|
* -----------------
|
|
* These tests verify RAM using sequential writes and reads
|
|
* to/from RAM. There are several test cases that use different patterns to
|
|
* verify RAM. Each test case fills a region of RAM with one pattern and
|
|
* then reads the region back and compares its contents with the pattern.
|
|
* The following patterns are used:
|
|
*
|
|
* 1a) zero pattern (0x00000000)
|
|
* 1b) negative pattern (0xffffffff)
|
|
* 1c) checkerboard pattern (0x55555555)
|
|
* 1d) checkerboard pattern (0xaaaaaaaa)
|
|
* 2) bit-flip pattern ((1 << (offset % 32))
|
|
* 3) address pattern (offset)
|
|
* 4) address pattern (~offset)
|
|
*
|
|
* Being run in normal mode, the test verifies only small 4Kb
|
|
* regions of RAM around each 1Mb boundary. For example, for 64Mb
|
|
* RAM the following areas are verified: 0x00000000-0x00000800,
|
|
* 0x000ff800-0x00100800, 0x001ff800-0x00200800, ..., 0x03fff800-
|
|
* 0x04000000. If the test is run in slow-test mode, it verifies
|
|
* the whole RAM.
|
|
*/
|
|
|
|
#include <post.h>
|
|
#include <watchdog.h>
|
|
|
|
#if CONFIG_POST & (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_MEM_REGIONS)
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Define INJECT_*_ERRORS for testing error detection in the presence of
|
|
* _good_ hardware.
|
|
*/
|
|
#undef INJECT_DATA_ERRORS
|
|
#undef INJECT_ADDRESS_ERRORS
|
|
|
|
#ifdef INJECT_DATA_ERRORS
|
|
#warning "Injecting data line errors for testing purposes"
|
|
#endif
|
|
|
|
#ifdef INJECT_ADDRESS_ERRORS
|
|
#warning "Injecting address line errors for testing purposes"
|
|
#endif
|
|
|
|
|
|
/*
|
|
* This function performs a double word move from the data at
|
|
* the source pointer to the location at the destination pointer.
|
|
* This is helpful for testing memory on processors which have a 64 bit
|
|
* wide data bus.
|
|
*
|
|
* On those PowerPC with FPU, use assembly and a floating point move:
|
|
* this does a 64 bit move.
|
|
*
|
|
* For other processors, let the compiler generate the best code it can.
|
|
*/
|
|
static void move64(const unsigned long long *src, unsigned long long *dest)
|
|
{
|
|
*dest = *src;
|
|
}
|
|
|
|
/*
|
|
* This is 64 bit wide test patterns. Note that they reside in ROM
|
|
* (which presumably works) and the tests write them to RAM which may
|
|
* not work.
|
|
*
|
|
* The "otherpattern" is written to drive the data bus to values other
|
|
* than the test pattern. This is for detecting floating bus lines.
|
|
*
|
|
*/
|
|
const static unsigned long long pattern[] = {
|
|
0xaaaaaaaaaaaaaaaaULL,
|
|
0xccccccccccccccccULL,
|
|
0xf0f0f0f0f0f0f0f0ULL,
|
|
0xff00ff00ff00ff00ULL,
|
|
0xffff0000ffff0000ULL,
|
|
0xffffffff00000000ULL,
|
|
0x00000000ffffffffULL,
|
|
0x0000ffff0000ffffULL,
|
|
0x00ff00ff00ff00ffULL,
|
|
0x0f0f0f0f0f0f0f0fULL,
|
|
0x3333333333333333ULL,
|
|
0x5555555555555555ULL
|
|
};
|
|
const unsigned long long otherpattern = 0x0123456789abcdefULL;
|
|
|
|
|
|
static int memory_post_dataline(unsigned long long * pmem)
|
|
{
|
|
unsigned long long temp64 = 0;
|
|
int num_patterns = ARRAY_SIZE(pattern);
|
|
int i;
|
|
unsigned int hi, lo, pathi, patlo;
|
|
int ret = 0;
|
|
|
|
for ( i = 0; i < num_patterns; i++) {
|
|
move64(&(pattern[i]), pmem++);
|
|
/*
|
|
* Put a different pattern on the data lines: otherwise they
|
|
* may float long enough to read back what we wrote.
|
|
*/
|
|
move64(&otherpattern, pmem--);
|
|
move64(pmem, &temp64);
|
|
|
|
#ifdef INJECT_DATA_ERRORS
|
|
temp64 ^= 0x00008000;
|
|
#endif
|
|
|
|
if (temp64 != pattern[i]){
|
|
pathi = (pattern[i]>>32) & 0xffffffff;
|
|
patlo = pattern[i] & 0xffffffff;
|
|
|
|
hi = (temp64>>32) & 0xffffffff;
|
|
lo = temp64 & 0xffffffff;
|
|
|
|
post_log("Memory (data line) error at %08x, "
|
|
"wrote %08x%08x, read %08x%08x !\n",
|
|
pmem, pathi, patlo, hi, lo);
|
|
ret = -1;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int memory_post_addrline(ulong *testaddr, ulong *base, ulong size)
|
|
{
|
|
ulong *target;
|
|
ulong *end;
|
|
ulong readback;
|
|
ulong xor;
|
|
int ret = 0;
|
|
|
|
end = (ulong *)((ulong)base + size); /* pointer arith! */
|
|
xor = 0;
|
|
for(xor = sizeof(ulong); xor > 0; xor <<= 1) {
|
|
target = (ulong *)((ulong)testaddr ^ xor);
|
|
if((target >= base) && (target < end)) {
|
|
*testaddr = ~*target;
|
|
readback = *target;
|
|
|
|
#ifdef INJECT_ADDRESS_ERRORS
|
|
if(xor == 0x00008000) {
|
|
readback = *testaddr;
|
|
}
|
|
#endif
|
|
if(readback == *testaddr) {
|
|
post_log("Memory (address line) error at %08x<->%08x, "
|
|
"XOR value %08x !\n",
|
|
testaddr, target, xor);
|
|
ret = -1;
|
|
}
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int memory_post_test1(unsigned long start,
|
|
unsigned long size,
|
|
unsigned long val)
|
|
{
|
|
unsigned long i;
|
|
ulong *mem = (ulong *) start;
|
|
ulong readback;
|
|
int ret = 0;
|
|
|
|
for (i = 0; i < size / sizeof (ulong); i++) {
|
|
mem[i] = val;
|
|
if (i % 1024 == 0)
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
for (i = 0; i < size / sizeof (ulong) && !ret; i++) {
|
|
readback = mem[i];
|
|
if (readback != val) {
|
|
post_log("Memory error at %08x, "
|
|
"wrote %08x, read %08x !\n",
|
|
mem + i, val, readback);
|
|
|
|
ret = -1;
|
|
break;
|
|
}
|
|
if (i % 1024 == 0)
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int memory_post_test2(unsigned long start, unsigned long size)
|
|
{
|
|
unsigned long i;
|
|
ulong *mem = (ulong *) start;
|
|
ulong readback;
|
|
int ret = 0;
|
|
|
|
for (i = 0; i < size / sizeof (ulong); i++) {
|
|
mem[i] = 1 << (i % 32);
|
|
if (i % 1024 == 0)
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
for (i = 0; i < size / sizeof (ulong) && !ret; i++) {
|
|
readback = mem[i];
|
|
if (readback != (1 << (i % 32))) {
|
|
post_log("Memory error at %08x, "
|
|
"wrote %08x, read %08x !\n",
|
|
mem + i, 1 << (i % 32), readback);
|
|
|
|
ret = -1;
|
|
break;
|
|
}
|
|
if (i % 1024 == 0)
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int memory_post_test3(unsigned long start, unsigned long size)
|
|
{
|
|
unsigned long i;
|
|
ulong *mem = (ulong *) start;
|
|
ulong readback;
|
|
int ret = 0;
|
|
|
|
for (i = 0; i < size / sizeof (ulong); i++) {
|
|
mem[i] = i;
|
|
if (i % 1024 == 0)
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
for (i = 0; i < size / sizeof (ulong) && !ret; i++) {
|
|
readback = mem[i];
|
|
if (readback != i) {
|
|
post_log("Memory error at %08x, "
|
|
"wrote %08x, read %08x !\n",
|
|
mem + i, i, readback);
|
|
|
|
ret = -1;
|
|
break;
|
|
}
|
|
if (i % 1024 == 0)
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int memory_post_test4(unsigned long start, unsigned long size)
|
|
{
|
|
unsigned long i;
|
|
ulong *mem = (ulong *) start;
|
|
ulong readback;
|
|
int ret = 0;
|
|
|
|
for (i = 0; i < size / sizeof (ulong); i++) {
|
|
mem[i] = ~i;
|
|
if (i % 1024 == 0)
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
for (i = 0; i < size / sizeof (ulong) && !ret; i++) {
|
|
readback = mem[i];
|
|
if (readback != ~i) {
|
|
post_log("Memory error at %08x, "
|
|
"wrote %08x, read %08x !\n",
|
|
mem + i, ~i, readback);
|
|
|
|
ret = -1;
|
|
break;
|
|
}
|
|
if (i % 1024 == 0)
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int memory_post_test_lines(unsigned long start, unsigned long size)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = memory_post_dataline((unsigned long long *)start);
|
|
WATCHDOG_RESET();
|
|
if (!ret)
|
|
ret = memory_post_addrline((ulong *)start, (ulong *)start,
|
|
size);
|
|
WATCHDOG_RESET();
|
|
if (!ret)
|
|
ret = memory_post_addrline((ulong *)(start+size-8),
|
|
(ulong *)start, size);
|
|
WATCHDOG_RESET();
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int memory_post_test_patterns(unsigned long start, unsigned long size)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = memory_post_test1(start, size, 0x00000000);
|
|
WATCHDOG_RESET();
|
|
if (!ret)
|
|
ret = memory_post_test1(start, size, 0xffffffff);
|
|
WATCHDOG_RESET();
|
|
if (!ret)
|
|
ret = memory_post_test1(start, size, 0x55555555);
|
|
WATCHDOG_RESET();
|
|
if (!ret)
|
|
ret = memory_post_test1(start, size, 0xaaaaaaaa);
|
|
WATCHDOG_RESET();
|
|
if (!ret)
|
|
ret = memory_post_test2(start, size);
|
|
WATCHDOG_RESET();
|
|
if (!ret)
|
|
ret = memory_post_test3(start, size);
|
|
WATCHDOG_RESET();
|
|
if (!ret)
|
|
ret = memory_post_test4(start, size);
|
|
WATCHDOG_RESET();
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int memory_post_test_regions(unsigned long start, unsigned long size)
|
|
{
|
|
unsigned long i;
|
|
int ret = 0;
|
|
|
|
for (i = 0; i < (size >> 20) && (!ret); i++) {
|
|
if (!ret)
|
|
ret = memory_post_test_patterns(start + (i << 20),
|
|
0x800);
|
|
if (!ret)
|
|
ret = memory_post_test_patterns(start + (i << 20) +
|
|
0xff800, 0x800);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int memory_post_tests(unsigned long start, unsigned long size)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = memory_post_test_lines(start, size);
|
|
if (!ret)
|
|
ret = memory_post_test_patterns(start, size);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* !! this is only valid, if you have contiguous memory banks !!
|
|
*/
|
|
__attribute__((weak))
|
|
int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
|
|
{
|
|
struct bd_info *bd = gd->bd;
|
|
|
|
*vstart = CONFIG_SYS_SDRAM_BASE;
|
|
*size = (gd->ram_size >= 256 << 20 ?
|
|
256 << 20 : gd->ram_size) - (1 << 20);
|
|
|
|
/* Limit area to be tested with the board info struct */
|
|
if ((*vstart) + (*size) > (ulong)bd)
|
|
*size = (ulong)bd - *vstart;
|
|
|
|
return 0;
|
|
}
|
|
|
|
__attribute__((weak))
|
|
int arch_memory_test_advance(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
__attribute__((weak))
|
|
int arch_memory_test_cleanup(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
__attribute__((weak))
|
|
void arch_memory_failure_handle(void)
|
|
{
|
|
return;
|
|
}
|
|
|
|
int memory_regions_post_test(int flags)
|
|
{
|
|
int ret = 0;
|
|
phys_addr_t phys_offset = 0;
|
|
u32 memsize, vstart;
|
|
|
|
arch_memory_test_prepare(&vstart, &memsize, &phys_offset);
|
|
|
|
ret = memory_post_test_lines(vstart, memsize);
|
|
if (!ret)
|
|
ret = memory_post_test_regions(vstart, memsize);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int memory_post_test(int flags)
|
|
{
|
|
int ret = 0;
|
|
phys_addr_t phys_offset = 0;
|
|
u32 memsize, vstart;
|
|
|
|
arch_memory_test_prepare(&vstart, &memsize, &phys_offset);
|
|
|
|
do {
|
|
if (flags & POST_SLOWTEST) {
|
|
ret = memory_post_tests(vstart, memsize);
|
|
} else { /* POST_NORMAL */
|
|
ret = memory_post_test_regions(vstart, memsize);
|
|
}
|
|
} while (!ret &&
|
|
!arch_memory_test_advance(&vstart, &memsize, &phys_offset));
|
|
|
|
arch_memory_test_cleanup(&vstart, &memsize, &phys_offset);
|
|
if (ret)
|
|
arch_memory_failure_handle();
|
|
|
|
return ret;
|
|
}
|
|
|
|
#endif /* CONFIG_POST&(CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS) */
|