mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
e2a53458a7
This is long over due. All but two net drivers have been converted, but those have now been dropped. The only thing left to do is actually delete all references to NET_MULTI and code that is compiled when that is not defined. So here we scrub the core code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
180 lines
6.1 KiB
Text
180 lines
6.1 KiB
Text
Freescale MCF53017EVB ColdFire Development Board
|
|
================================================
|
|
|
|
TsiChung Liew(Tsi-Chung.Liew@freescale.com)
|
|
Created 10/22/08
|
|
===========================================
|
|
|
|
|
|
Changed files:
|
|
==============
|
|
|
|
- board/freescale/m53017evb/m53017evb.c Dram setup
|
|
- board/freescale/m53017evb/mii.c Mii access
|
|
- board/freescale/m53017evb/Makefile Makefile
|
|
- board/freescale/m53017evb/config.mk config make
|
|
- board/freescale/m53017evb/u-boot.lds Linker description
|
|
|
|
- arch/m68k/cpu/mcf532x/cpu.c cpu specific code
|
|
- arch/m68k/cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
|
|
- arch/m68k/cpu/mcf532x/interrupts.c cpu specific interrupt support
|
|
- arch/m68k/cpu/mcf532x/speed.c system, flexbus, and cpu clock
|
|
- arch/m68k/cpu/mcf532x/Makefile Makefile
|
|
- arch/m68k/cpu/mcf532x/config.mk config make
|
|
- arch/m68k/cpu/mcf532x/start.S start up assembly code
|
|
|
|
- doc/README.m53017evb This readme file
|
|
|
|
- drivers/net/mcffec.c ColdFire common FEC driver
|
|
- drivers/net/mcfmii.c ColdFire common Mii driver
|
|
- drivers/serial/mcfuart.c ColdFire common UART driver
|
|
- drivers/rtc/mcfrtc.c Realtime clock Driver
|
|
|
|
- include/asm-m68k/bitops.h Bit operation function export
|
|
- include/asm-m68k/byteorder.h Byte order functions
|
|
- include/asm-m68k/fec.h FEC structure and definition
|
|
- include/asm-m68k/fsl_i2c.h I2C structure and definition
|
|
- include/asm-m68k/global_data.h Global data structure
|
|
- include/asm-m68k/immap.h ColdFire specific header file and driver macros
|
|
- include/asm-m68k/immap_5301x.h mcf5301x specific header file
|
|
- include/asm-m68k/io.h io functions
|
|
- include/asm-m68k/m532x.h mcf5301x specific header file
|
|
- include/asm-m68k/posix_types.h Posix
|
|
- include/asm-m68k/processor.h header file
|
|
- include/asm-m68k/ptrace.h Exception structure
|
|
- include/asm-m68k/rtc.h Realtime clock header file
|
|
- include/asm-m68k/string.h String function export
|
|
- include/asm-m68k/timer.h Timer structure and definition
|
|
- include/asm-m68k/types.h Data types definition
|
|
- include/asm-m68k/uart.h Uart structure and definition
|
|
- include/asm-m68k/u-boot.h u-boot structure
|
|
|
|
- include/configs/M53017EVB.h Board specific configuration file
|
|
|
|
- arch/m68k/lib/board.c board init function
|
|
- arch/m68k/lib/cache.c
|
|
- arch/m68k/lib/interrupts Coldfire common interrupt functions
|
|
- arch/m68k/lib/m68k_linux.c
|
|
- arch/m68k/lib/time.c Timer functions (Dma timer and PIT)
|
|
- arch/m68k/lib/traps.c Exception init code
|
|
|
|
1 MCF5301x specific Options/Settings
|
|
====================================
|
|
1.1 pre-loader is no longer suppoer in thie coldfire family
|
|
|
|
1.2 Configuration settings for M53017EVB Development Board
|
|
CONFIG_MCF5301x -- define for all MCF5301x CPUs
|
|
CONFIG_M53015 -- define for MCF53015 CPUs
|
|
CONFIG_M53017EVB -- define for M53017EVB board
|
|
|
|
CONFIG_MCFUART -- define to use common CF Uart driver
|
|
CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
|
|
CONFIG_BAUDRATE -- define UART baudrate
|
|
|
|
CONFIG_MCFRTC -- define to use common CF RTC driver
|
|
CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
|
|
CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
|
|
RTC_DEBUG -- define to show RTC debug message
|
|
CONFIG_CMD_DATE -- enable to use date feature in u-boot
|
|
|
|
CONFIG_MCFFEC -- define to use common CF FEC driver
|
|
CONFIG_MII -- enable to use MII driver
|
|
CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
|
|
CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
|
|
CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
|
|
CONFIG_SYS_FAULT_ECHO_LINK_DOWN --
|
|
CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
|
|
CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
|
|
MCFFEC_TOUT_LOOP -- set FEC timeout loop
|
|
|
|
CONFIG_MCFTMR -- define to use DMA timer
|
|
CONFIG_MCFPIT -- define to use PIT timer
|
|
|
|
CONFIG_FSL_I2C -- define to use FSL common I2C driver
|
|
CONFIG_HARD_I2C -- define for I2C hardware support
|
|
CONFIG_SOFT_I2C -- define for I2C bit-banged
|
|
CONFIG_SYS_I2C_SPEED -- define for I2C speed
|
|
CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
|
|
CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
|
|
CONFIG_SYS_IMMR -- define for MBAR offset
|
|
|
|
CONFIG_SYS_MBAR -- define MBAR offset
|
|
|
|
CONFIG_MONITOR_IS_IN_RAM -- Not support
|
|
|
|
CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM
|
|
|
|
CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
|
|
CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
|
|
CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
|
|
|
|
CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
|
|
|
|
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
|
|
===========================================
|
|
2.1. System memory map:
|
|
Flash: 0x00000000-0x3FFFFFFF (1024MB)
|
|
DDR: 0x40000000-0x7FFFFFFF (1024MB)
|
|
SRAM: 0x80000000-0x8FFFFFFF (256MB)
|
|
IP: 0xFC000000-0xFFFFFFFF (256MB)
|
|
|
|
2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
|
|
linux kernel, you can customize it based on your system requirements:
|
|
Flash0: 0x00000000-0x00FFFFFF (16MB)
|
|
DDR: 0x40000000-0x4FFFFFFF (256MB)
|
|
SRAM: 0x80000000-0x80007FFF (32KB)
|
|
IP: 0xFC000000-0xFC0FFFFF (64KB)
|
|
|
|
3. COMPILATION
|
|
==============
|
|
3.1 To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or
|
|
uClinux version) from codesourcery.com was used. Download it from:
|
|
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
|
|
|
|
3.2 Compilation
|
|
export CROSS_COMPILE=cross-compile-prefix
|
|
cd u-boot
|
|
make distclean
|
|
make M53017EVB_config
|
|
make
|
|
|
|
4. SCREEN DUMP
|
|
==============
|
|
4.1 M53017EVB Development board
|
|
(NOTE: May not show exactly the same)
|
|
|
|
U-Boot 2008.10 (Oct 22 2007 - 11:07:57)
|
|
|
|
CPU: Freescale MCF53015 (Mask:76 Version:0)
|
|
CPU CLK 240 Mhz BUS CLK 80 Mhz
|
|
Board: Freescale M53017EVB
|
|
I2C: ready
|
|
DRAM: 64 MB
|
|
FLASH: 16 MB
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
NAND: 16 MiB
|
|
Net: FEC0, FEC1
|
|
-> print
|
|
bootdelay=1
|
|
baudrate=115200
|
|
ethaddr=00:e0:0c:bc:e5:60
|
|
hostname=M53017EVB
|
|
netdev=eth0
|
|
loadaddr=40010000
|
|
u-boot=u-boot.bin
|
|
load=tftp ${loadaddr) ${u-boot}
|
|
upd=run load; run prog
|
|
prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
|
|
gatewayip=192.168.1.1
|
|
netmask=255.255.255.0
|
|
ipaddr=192.168.1.3
|
|
serverip=192.168.1.2
|
|
stdin=serial
|
|
stdout=serial
|
|
stderr=serial
|
|
mem=65024k
|
|
|
|
Environment size: 437/4092 bytes
|
|
->
|