mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
a139ac58a7
Change the compatible string to "fsl,etsec2" for the Ethernet ports,
which is used in the current driver's match table.
Fixes: 69a00875e3 ("doc: dt-bindings: Describe Freescale TSEC ethernet controller")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
64 lines
1.9 KiB
Text
64 lines
1.9 KiB
Text
* TSEC-compatible ethernet nodes
|
|
|
|
Properties:
|
|
|
|
- compatible : Should be "fsl,etsec2"
|
|
- reg : Offset and length of the register set for the device
|
|
- phy-handle : See ethernet.txt file in the same directory.
|
|
- phy-connection-type : See ethernet.txt file in the same directory. This
|
|
property is only really needed if the connection is of type "rgmii-id",
|
|
"rgmii-rxid" and "rgmii-txid" as all other connection types are detected
|
|
by hardware.
|
|
|
|
Example:
|
|
ethernet@24000 {
|
|
compatible = "fsl,etsec2";
|
|
reg = <0x24000 0x1000>;
|
|
phy-handle = <&phy0>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
|
|
Child nodes of the TSEC controller are typically the individual PHY devices
|
|
connected via the MDIO bus (sometimes the MDIO bus controller is separate).
|
|
|
|
* MDIO IO device
|
|
|
|
The MDIO is a bus to which the PHY devices are connected. For each
|
|
device that exists on this bus, a PHY node should be created.
|
|
|
|
Required properties:
|
|
- compatible : Should define the compatible device type for the
|
|
mdio. Currently supported string/device is "fsl,etsec2-mdio".
|
|
- reg : Offset and length of the register set for the device
|
|
|
|
Example:
|
|
|
|
mdio@24520 {
|
|
compatible = "fsl,etsec2-mdio";
|
|
reg = <0x24520 0x20>;
|
|
|
|
ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
* TBI Internal MDIO bus
|
|
|
|
As of this writing, every tsec is associated with an internal TBI PHY.
|
|
This PHY is accessed through the local MDIO bus. These buses are defined
|
|
similarly to the mdio buses. The TBI PHYs underneath them are similar to
|
|
normal PHYs, but the reg property is considered instructive, rather than
|
|
descriptive. The reg property should be chosen so it doesn't interfere
|
|
with other PHYs on the bus. The TBI PHYs are referred to by a "tbi-handle"
|
|
property under the tsec node, which has a similar meaning of "phy-handle".
|
|
|
|
Example:
|
|
ethernet@24000 {
|
|
phy-handle = <&tbi1>;
|
|
};
|
|
|
|
mdio@24520 {
|
|
tbi1: tbi-phy@1f {
|
|
reg = <0x1f>;
|
|
};
|
|
};
|