mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
858290178f
The following changes allow U-Boot to fully relocate from flash to RAM: - Remove linker scripts' .fixup sections from the .text section - Add -mrelocatable to PLATFORM_RELFLAGS for all boards - Define CONFIG_RELOC_FIXUP_WORKS for all boards Previously, U-Boot would partially relocate, but statically initialized pointers needed to be manually relocated. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
||
|---|---|---|
| .. | ||
| config.mk | ||
| flash.c | ||
| host_bridge.c | ||
| init.S | ||
| jse.c | ||
| jse_priv.h | ||
| Makefile | ||
| README.txt | ||
| sdram.c | ||
| u-boot.lds | ||
JSE Configuration Details Memory Bank 0 -- Flash chip --------------------------- 0xfff00000 - 0xffffffff The flash chip is really only 512Kbytes, but the high address bit of the 1Meg region is ignored, so the flash is replicated through the region. Thus, this is consistent with a flash base address 0xfff80000. The placement at the end is to be consistent with reset behavior, where the processor itself initially uses this bus to load the branch vector and start running. On-Chip Memory -------------- 0xf4000000 - 0xf4000fff The 405GPr includes a 4K on-chip memory that can be placed however software chooses. I choose to place the memory at this address, to keep it out of the cachable areas. Memory Bank 1 -- SystemACE Controller ------------------------------------- 0xf0000000 - 0xf00fffff The SystemACE chip is along on peripheral bank CS#1. We don't need much space, but 1Meg is the smallest we can configure the chip to allocate. We need it far away from the flash region, because this region is set to be non-cached. Internal Peripherals -------------------- 0xef600300 - 0xef6008ff These are scattered various peripherals internal to the PPC405GPr chip. SDRAM ----- 0x00000000 - 0x07ffffff (128 MBytes)