u-boot/arch/arm/dts/stm32f746-disco-u-boot.dtsi
Simon Glass 8c103c33fb dm: dts: Convert driver model tags to use new schema
Now that Linux has accepted these tags, move the device tree files in
U-Boot over to use them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-14 09:43:26 -07:00

241 lines
6.2 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
#include <stm32f7-u-boot.dtsi>
/{
chosen {
bootargs = "root=/dev/ram rdinit=/linuxrc";
};
aliases {
/* Aliases for gpios so as to use sequence */
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio9 = &gpioj;
gpio10 = &gpiok;
mmc0 = &sdio1;
spi0 = &qspi;
};
backlight: backlight {
compatible = "gpio-backlight";
gpios = <&gpiok 3 0>;
status = "okay";
};
button1 {
compatible = "st,button1";
button-gpio = <&gpioi 11 0>;
};
led1 {
compatible = "st,led1";
led-gpio = <&gpioi 1 0>;
};
panel-rgb@0 {
compatible = "simple-panel";
backlight = <&backlight>;
enable-gpios = <&gpioi 12 0>;
status = "okay";
display-timings {
timing@0 {
clock-frequency = <9000000>;
hactive = <480>;
vactive = <272>;
hfront-porch = <2>;
hback-porch = <2>;
hsync-len = <41>;
vfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
soc {
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>;
pinctrl-0 = <&ltdc_pins>;
status = "okay";
bootph-all;
};
};
};
&fmc {
/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
bank1: bank@0 {
bootph-all;
st,sdram-control = /bits/ 8 <NO_COL_8
NO_ROW_12
MWIDTH_16
BANKS_4
CAS_3
SDCLK_2
RD_BURST_EN
RD_PIPE_DL_0>;
st,sdram-timing = /bits/ 8 <TMRD_2
TXSR_6
TRAS_4
TRC_6
TWR_2
TRP_2
TRCD_2>;
/* refcount = (64msec/total_row_sdram)*freq - 20 */
st,sdram-refcount = < 1542 >;
};
};
&pinctrl {
ethernet_mii: mii@0 {
pins {
pinmux = <STM32_PINMUX('G',13, AF11)>, /* ETH_RMII_TXD0 */
<STM32_PINMUX('G',14, AF11)>, /* ETH_RMII_TXD1 */
<STM32_PINMUX('G',11, AF11)>, /* ETH_RMII_TX_EN */
<STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
<STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
<STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */
<STM32_PINMUX('A', 7, AF11)>, /* ETH_RMII_CRS_DV */
<STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */
<STM32_PINMUX('C', 5, AF11)>; /* ETH_RMII_RXD1 */
slew-rate = <2>;
};
};
fmc_pins: fmc@0 {
pins {
pinmux = <STM32_PINMUX('D',10, AF12)>, /* D15 */
<STM32_PINMUX('D', 9, AF12)>, /* D14 */
<STM32_PINMUX('D', 8, AF12)>, /* D13 */
<STM32_PINMUX('E',15, AF12)>, /* D12 */
<STM32_PINMUX('E',14, AF12)>, /* D11 */
<STM32_PINMUX('E',13, AF12)>, /* D10 */
<STM32_PINMUX('E',12, AF12)>, /* D9 */
<STM32_PINMUX('E',11, AF12)>, /* D8 */
<STM32_PINMUX('E',10, AF12)>, /* D7 */
<STM32_PINMUX('E', 9, AF12)>, /* D6 */
<STM32_PINMUX('E', 8, AF12)>, /* D5 */
<STM32_PINMUX('E', 7, AF12)>, /* D4 */
<STM32_PINMUX('D', 1, AF12)>, /* D3 */
<STM32_PINMUX('D', 0, AF12)>, /* D2 */
<STM32_PINMUX('D',15, AF12)>, /* D1 */
<STM32_PINMUX('D',14, AF12)>, /* D0 */
<STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
<STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
<STM32_PINMUX('G', 5, AF12)>, /* BA1 */
<STM32_PINMUX('G', 4, AF12)>, /* BA0 */
<STM32_PINMUX('G', 1, AF12)>, /* A11 */
<STM32_PINMUX('G', 0, AF12)>, /* A10 */
<STM32_PINMUX('F',15, AF12)>, /* A9 */
<STM32_PINMUX('F',14, AF12)>, /* A8 */
<STM32_PINMUX('F',13, AF12)>, /* A7 */
<STM32_PINMUX('F',12, AF12)>, /* A6 */
<STM32_PINMUX('F', 5, AF12)>, /* A5 */
<STM32_PINMUX('F', 4, AF12)>, /* A4 */
<STM32_PINMUX('F', 3, AF12)>, /* A3 */
<STM32_PINMUX('F', 2, AF12)>, /* A2 */
<STM32_PINMUX('F', 1, AF12)>, /* A1 */
<STM32_PINMUX('F', 0, AF12)>, /* A0 */
<STM32_PINMUX('H', 3, AF12)>, /* SDNE0 */
<STM32_PINMUX('H', 5, AF12)>, /* SDNWE */
<STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
<STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
<STM32_PINMUX('C', 3, AF12)>, /* SDCKE0 */
<STM32_PINMUX('G', 8, AF12)>; /* SDCLK> */
slew-rate = <2>;
};
};
ltdc_pins: ltdc@0 {
pins {
pinmux = <STM32_PINMUX('E', 4, AF14)>, /* B0 */
<STM32_PINMUX('G',12, AF14)>, /* B4 */
<STM32_PINMUX('I', 9, AF14)>, /* VSYNC */
<STM32_PINMUX('I',10, AF14)>, /* HSYNC */
<STM32_PINMUX('I',14, AF14)>, /* CLK */
<STM32_PINMUX('I',15, AF14)>, /* R0 */
<STM32_PINMUX('J', 0, AF14)>, /* R1 */
<STM32_PINMUX('J', 1, AF14)>, /* R2 */
<STM32_PINMUX('J', 2, AF14)>, /* R3 */
<STM32_PINMUX('J', 3, AF14)>, /* R4 */
<STM32_PINMUX('J', 4, AF14)>, /* R5 */
<STM32_PINMUX('J', 5, AF14)>, /* R6 */
<STM32_PINMUX('J', 6, AF14)>, /* R7 */
<STM32_PINMUX('J', 7, AF14)>, /* G0 */
<STM32_PINMUX('J', 8, AF14)>, /* G1 */
<STM32_PINMUX('J', 9, AF14)>, /* G2 */
<STM32_PINMUX('J',10, AF14)>, /* G3 */
<STM32_PINMUX('J',11, AF14)>, /* G4 */
<STM32_PINMUX('J',13, AF14)>, /* B1 */
<STM32_PINMUX('J',14, AF14)>, /* B2 */
<STM32_PINMUX('J',15, AF14)>, /* B3 */
<STM32_PINMUX('K', 0, AF14)>, /* G5 */
<STM32_PINMUX('K', 1, AF14)>, /* G6 */
<STM32_PINMUX('K', 2, AF14)>, /* G7 */
<STM32_PINMUX('K', 4, AF14)>, /* B5 */
<STM32_PINMUX('K', 5, AF14)>, /* B6 */
<STM32_PINMUX('K', 6, AF14)>, /* B7 */
<STM32_PINMUX('K', 7, AF14)>; /* DE */
slew-rate = <2>;
};
};
qspi_pins: qspi@0 {
pins {
pinmux = <STM32_PINMUX('B', 2, AF9)>, /* CLK */
<STM32_PINMUX('B', 6, AF10)>, /* BK1_NCS */
<STM32_PINMUX('D',11, AF9)>, /* BK1_IO0 */
<STM32_PINMUX('D',12, AF9)>, /* BK1_IO1 */
<STM32_PINMUX('D',13, AF9)>, /* BK1_IO3 */
<STM32_PINMUX('E', 2, AF9)>; /* BK1_IO2 */
slew-rate = <2>;
};
};
usart1_pins_b: usart1-1 {
bootph-all;
pins1 {
bootph-all;
};
pins2 {
bootph-all;
};
};
};
&pwrcfg {
bootph-all;
};
&qspi {
reg = <0xa0001000 0x1000>, <0x90000000 0x1000000>;
qflash0: n25q128a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <108000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
reg = <0>;
};
};