u-boot/arch/arm/dts/at91-sama5d2_xplained.dts
Simon Glass 8c103c33fb dm: dts: Convert driver model tags to use new schema
Now that Linux has accepted these tags, move the device tree files in
U-Boot over to use them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-14 09:43:26 -07:00

299 lines
6.3 KiB
Text

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
/ {
model = "Atmel SAMA5D2 Xplained";
compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
chosen {
bootph-all;
stdout-path = &uart1;
};
memory {
reg = <0x20000000 0x20000000>;
};
onewire_tm: onewire {
gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_onewire_tm_default>;
status = "okay";
w1_eeprom: w1_eeprom@0 {
compatible = "maxim,ds24b33";
status = "okay";
};
};
ahb {
usb1: ohci@400000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioA 42 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};
usb2: ehci@500000 {
status = "okay";
};
sdmmc0: sdio-host@a0000000 {
bus-width = <8>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
status = "okay";
bootph-all;
};
sdmmc1: sdio-host@b0000000 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc1_default>;
status = "okay"; /* conflict with qspi0 */
bootph-all;
};
apb {
hlcdc: hlcdc@f0000000 {
atmel,vl-bpix = <4>;
atmel,guard-time = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
status = "okay";
bootph-all;
display-timings {
bootph-all;
480x272 {
clock-frequency = <9000000>;
hactive = <480>;
vactive = <272>;
hsync-len = <41>;
hfront-porch = <2>;
hback-porch = <2>;
vfront-porch = <2>;
vback-porch = <2>;
vsync-len = <11>;
bootph-all;
};
};
};
qspi0: spi@f0020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi0_sck_cs_default &pinctrl_qspi0_dat_default>;
status = "okay";
bootph-all;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <83000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
bootph-all;
};
};
spi0: spi@f8000000 {
cs-gpios = <&pioA 17 0>, <0>, <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_default>;
status = "okay";
bootph-all;
spi_flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
bootph-all;
};
};
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
phy-mode = "rmii";
status = "okay";
ethernet-phy@1 {
reg = <0x1>;
};
};
uart1: serial@f8020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>;
status = "okay";
bootph-all;
};
i2c1: i2c@fc028000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_default>;
status = "okay";
i2c_eeprom: i2c_eeprom@5c {
compatible = "atmel,24mac402";
reg = <0x5c>;
};
};
pioA: pinctrl@fc038000 {
pinctrl_i2c1_default: i2c1_default {
pinmux = <PIN_PD4__TWD1>,
<PIN_PD5__TWCK1>;
bias-disable;
};
pinctrl_lcd_base: pinctrl_lcd_base {
pinmux = <PIN_PC30__LCDVSYNC>,
<PIN_PC31__LCDHSYNC>,
<PIN_PD1__LCDDEN>,
<PIN_PD0__LCDPCK>;
bias-disable;
};
pinctrl_lcd_pwm: pinctrl_lcd_pwm {
pinmux = <PIN_PC28__LCDPWM>;
bias-disable;
};
pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 {
pinmux = <PIN_PC10__LCDDAT2>,
<PIN_PC11__LCDDAT3>,
<PIN_PC12__LCDDAT4>,
<PIN_PC13__LCDDAT5>,
<PIN_PC14__LCDDAT6>,
<PIN_PC15__LCDDAT7>,
<PIN_PC16__LCDDAT10>,
<PIN_PC17__LCDDAT11>,
<PIN_PC18__LCDDAT12>,
<PIN_PC19__LCDDAT13>,
<PIN_PC20__LCDDAT14>,
<PIN_PC21__LCDDAT15>,
<PIN_PC22__LCDDAT18>,
<PIN_PC23__LCDDAT19>,
<PIN_PC24__LCDDAT20>,
<PIN_PC25__LCDDAT21>,
<PIN_PC26__LCDDAT22>,
<PIN_PC27__LCDDAT23>;
bias-disable;
};
pinctrl_macb0_phy_irq: macb0_phy_irq {
pinmux = <PIN_PC9__GPIO>;
bias-disable;
};
pinctrl_macb0_rmii: macb0_rmii {
pinmux = <PIN_PB14__GTXCK>,
<PIN_PB15__GTXEN>,
<PIN_PB16__GRXDV>,
<PIN_PB17__GRXER>,
<PIN_PB18__GRX0>,
<PIN_PB19__GRX1>,
<PIN_PB20__GTX0>,
<PIN_PB21__GTX1>,
<PIN_PB22__GMDC>,
<PIN_PB23__GMDIO>;
bias-disable;
};
pinctrl_qspi0_sck_cs_default: qspi0_sck_cs_default {
pinmux = <PIN_PA22__QSPI0_SCK>,
<PIN_PA23__QSPI0_CS>;
bias-disable;
bootph-all;
};
pinctrl_qspi0_dat_default: qspi0_dat_default {
pinmux = <PIN_PA24__QSPI0_IO0>,
<PIN_PA25__QSPI0_IO1>,
<PIN_PA26__QSPI0_IO2>,
<PIN_PA27__QSPI0_IO3>;
bias-pull-up;
bootph-all;
};
pinctrl_sdmmc0_default: sdmmc0_default {
cmd_dat {
pinmux = <PIN_PA1__SDMMC0_CMD>,
<PIN_PA2__SDMMC0_DAT0>,
<PIN_PA3__SDMMC0_DAT1>,
<PIN_PA4__SDMMC0_DAT2>,
<PIN_PA5__SDMMC0_DAT3>,
<PIN_PA6__SDMMC0_DAT4>,
<PIN_PA7__SDMMC0_DAT5>,
<PIN_PA8__SDMMC0_DAT6>,
<PIN_PA9__SDMMC0_DAT7>;
bias-pull-up;
bootph-all;
};
ck_cd_default {
pinmux = <PIN_PA0__SDMMC0_CK>,
<PIN_PA10__SDMMC0_RSTN>,
<PIN_PA11__SDMMC0_VDDSEL>,
<PIN_PA13__SDMMC0_CD>;
bias-disable;
bootph-all;
};
};
pinctrl_sdmmc1_default: sdmmc1_default {
cmd_dat {
pinmux = <PIN_PA28__SDMMC1_CMD>,
<PIN_PA18__SDMMC1_DAT0>,
<PIN_PA19__SDMMC1_DAT1>,
<PIN_PA20__SDMMC1_DAT2>,
<PIN_PA21__SDMMC1_DAT3>;
bias-pull-up;
bootph-all;
};
ck_cd {
pinmux = <PIN_PA22__SDMMC1_CK>,
<PIN_PA30__SDMMC1_CD>;
bias-disable;
bootph-all;
};
};
pinctrl_spi0_default: spi0_default {
pinmux = <PIN_PA14__SPI0_SPCK>,
<PIN_PA15__SPI0_MOSI>,
<PIN_PA16__SPI0_MISO>;
bias-disable;
bootph-all;
};
pinctrl_uart1_default: uart1_default {
pinmux = <PIN_PD2__URXD1>,
<PIN_PD3__UTXD1>;
bias-disable;
bootph-all;
};
pinctrl_usb_default: usb_default {
pinmux = <PIN_PB10__GPIO>;
bias-disable;
};
pinctrl_usba_vbus: usba_vbus {
pinmux = <PIN_PA31__GPIO>;
bias-disable;
};
pinctrl_onewire_tm_default: onewire_tm_default {
pinmux = <PIN_PB0__GPIO>;
bias-pull-up;
};
};
};
};
};