u-boot/arch/arm/dts/armada-385-db-88f6820-amc.dts
Pali Rohár 5d4d1212f7 arm: mvebu: Remove redundant u-boot, dm-pre-reloc from all 32-bit Armada SoCs
Replace it by including of mvebu-u-boot.dtsi file. When board does not use
-u-boot.dtsi then mvebu-u-boot.dtsi is included automatically by makefile
scripts/Makefile.lib.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2022-08-09 08:58:27 +02:00

143 lines
2.2 KiB
Text

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree file for Marvell Armada 385 AMC board
* (DB-88F6820-AMC)
*
* Copyright (C) 2017 Allied Telesis Labs
*/
/dts-v1/;
#include "armada-385.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Marvell Armada 385 AMC";
compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
ethernet0 = &eth0;
ethernet1 = &eth2;
i2c0 = &i2c0;
spi1 = &spi1;
};
memory {
device_type = "memory";
reg = <0x00000000 0x80000000>; /* 2GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
};
};
&i2c0 {
u-boot,i2c-slave-addr = <0x0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
};
&uart0 {
/*
* Exported on the micro USB connector CON3
* through an FTDI
*/
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&eth0 {
pinctrl-names = "default";
/*
* The Reference Clock 0 is used to provide a
* clock to the PHY
*/
pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
&eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
};
&usb0 {
status = "okay";
};
&mdio {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
phy0: ethernet-phy@1 {
reg = <1>;
};
phy1: ethernet-phy@0 {
reg = <0>;
};
};
&nand_controller {
status = "okay";
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
};
&pciec {
status = "okay";
};
&pcie1 {
/* Port 0, Lane 0 */
status = "okay";
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x00000000 0x00100000>;
label = "u-boot";
};
partition@100000 {
reg = <0x00100000 0x00040000>;
label = "u-boot-env";
};
};
};
};
&refclk {
clock-frequency = <20000000>;
};