u-boot/arch/arm/dts/zynqmp-ep108-clk.dtsi
Michal Simek a9022b017a ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodes
Serial driver is getting clk information via DT that's why
also clk node needs to have this flag.

Different behavior was introduced by:
"dm: Use dm_scan_fdt_dev() directly where possible"
(sha1: 911954859d)
where simple-bus driver starts to call dm_scan_fdt_dev() which has
additional logic around pre_reloc_only parameter which exclude
clk nodes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-01 08:35:02 +02:00

124 lines
1.7 KiB
Text

/*
* clock specification for Xilinx ZynqMP ep108 development board
*
* (C) Copyright 2015, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
&amba {
misc_clk: misc_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
u-boot,dm-pre-reloc;
};
i2c_clk: i2c_clk {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <111111111>;
};
sata_clk: sata_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <75000000>;
};
dp_aclk: clock0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
clock-accuracy = <100>;
};
dp_aud_clk: clock1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <22579200>;
clock-accuracy = <100>;
};
};
&can0 {
clocks = <&misc_clk &misc_clk>;
};
&gem0 {
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
};
&gpio {
clocks = <&misc_clk>;
};
&i2c0 {
clocks = <&i2c_clk>;
};
&i2c1 {
clocks = <&i2c_clk>;
};
&nand0 {
clocks = <&misc_clk &misc_clk>;
};
&qspi {
clocks = <&misc_clk &misc_clk>;
};
&sata {
clocks = <&sata_clk>;
};
&sdhci0 {
clocks = <&misc_clk>, <&misc_clk>;
};
&sdhci1 {
clocks = <&misc_clk>, <&misc_clk>;
};
&spi0 {
clocks = <&misc_clk &misc_clk>;
};
&spi1 {
clocks = <&misc_clk &misc_clk>;
};
&uart0 {
clocks = <&misc_clk &misc_clk>;
};
&usb0 {
clocks = <&misc_clk>, <&misc_clk>;
};
&usb1 {
clocks = <&misc_clk>, <&misc_clk>;
};
&watchdog0 {
clocks= <&misc_clk>;
};
&xilinx_drm {
clocks = <&misc_clk>;
};
&xlnx_dp {
clocks = <&dp_aclk>, <&dp_aud_clk>;
};
&xlnx_dp_snd_codec0 {
clocks = <&dp_aud_clk>;
};
&xlnx_dpdma {
clocks = <&misc_clk>;
};