u-boot/arch/arm/dts/dragonboard410c.dts
Mateusz Kulikowski 626f048bbc board: Add Qualcomm Dragonboard 410C support
This commit add support for 96Boards Dragonboard410C.
It is board based on APQ8016 Qualcomm SoC, complying with
96boards specification.
Features (present out of the box):
- 4x Cortex A53 (ARMv8)
- 2x USB Host port
- 1x USB Device port
- 4x LEDs
- 1x HDMI connector
- 1x uSD connector
- 3x buttons (Power, Vol+, Vol-/Reset)
- WIFI, Bluetooth with integrated antenna
- 8GiB eMMC

U-Boot boots chained with fastboot in 64-bit mode.
For detailed build instructions see readme.txt in board directory.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:27 -04:00

148 lines
2.9 KiB
Text

/*
* Qualcomm APQ8016 based Dragonboard 410C board device tree source
*
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "skeleton64.dtsi"
/ {
model = "Qualcomm Technologies, Inc. Dragonboard 410c";
compatible = "qcom,dragonboard", "qcom,apq8016-sbc";
qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>;
qcom,board-id = <0x10018 0x0>;
#address-cells = <0x2>;
#size-cells = <0x2>;
memory {
device_type = "memory";
reg = <0 0x80000000 0 0x3da00000>;
};
chosen {
stdout-path = "/soc/serial@78b0000";
};
soc {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges = <0x0 0x0 0x0 0xffffffff>;
compatible = "simple-bus";
clkc: qcom,gcc@1800000 {
compatible = "qcom,gcc-apq8016";
reg = <0x1800000 0x80000>;
#address-cells = <0x1>;
#size-cells = <0x0>;
};
serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4";
reg = <0x78b0000 0x200>;
u-boot,dm-pre-reloc;
clock = <&clkc 4>;
};
restart@4ab000 {
compatible = "qcom,pshold";
reg = <0x4ab000 0x4>;
};
soc_gpios: pinctrl@1000000 {
compatible = "qcom,apq8016-pinctrl";
reg = <0x1000000 0x300000>;
gpio-controller;
gpio-count = <122>;
gpio-bank-name="soc";
#gpio-cells = <1>;
};
ehci@78d9000 {
compatible = "qcom,ehci-host";
reg = <0x78d9000 0x400>;
};
sdhci@07824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7824900 0x11c 0x7824000 0x800>;
bus-width = <0x8>;
index = <0x0>;
non-removable;
clock = <&clkc 0>;
clock-frequency = <100000000>;
};
sdhci@07864000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7864900 0x11c 0x7864000 0x800>;
index = <0x1>;
bus-width = <0x4>;
clock = <&clkc 1>;
clock-frequency = <200000000>;
};
spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x200f800 0x200 0x2400000 0x400000 0x2c00000 0x400000>;
#address-cells = <0x1>;
#size-cells = <0x1>;
pmic0: pm8916@0 {
compatible = "qcom,spmi-pmic";
reg = <0x0 0x1>;
#address-cells = <0x1>;
#size-cells = <0x1>;
pm8916_pon: pm8916_pon@800 {
compatible = "qcom,pm8916-pwrkey";
reg = <0x800 0x96>;
#gpio-cells = <2>;
gpio-controller;
};
pm8916_gpios: pm8916_gpios@c000 {
compatible = "qcom,pm8916-gpio";
reg = <0xc000 0x400>;
gpio-controller;
gpio-count = <4>;
#gpio-cells = <2>;
gpio-bank-name="pmic";
};
};
pmic1: pm8916@1 {
compatible = "qcom,spmi-pmic";
reg = <0x1 0x1>;
};
};
};
leds {
compatible = "gpio-leds";
user1 {
label = "green:user1";
gpios = <&soc_gpios 21 0>;
};
user2 {
label = "green:user2";
gpios = <&soc_gpios 120 0>;
};
user3 {
label = "green:user3";
gpios = <&pm8916_gpios 0 0>;
};
user4 {
label = "green:user4";
gpios = <&pm8916_gpios 1 0>;
};
};
};
#include "dragonboard410c-uboot.dtsi"