Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-14 23:33:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/ddr/imx/imx8m/ddr_init.c
Rasmus Villemoes c9473b2c37 imx8m: fix reading of DDR4 MR registers [again] 
Commit 290ffe5788 (imx8m: fix reading of DDR4 MR registers) lifted a
private definition of lpddr4_mr_read() from imx8mm-cl-iot-gate board
code to drivers/ddr/imx/imx8m/ddrphy_utils.c, because that version
actually seems to work in practice.

However, commit 99c7cc58e1 (ddr: imx: Add i.MX9 DDR controller driver)
reintroduced the broken version in drivers/ddr/imx/imx8m/ddr_init.c,
copied most of the rest of ddrphy_utils.c to
drivers/ddr/imx/phy/ddrphy_utils.c, and stopped building
drivers/ddr/imx/imx8m/ddrphy_utils.c [and that file was then finally
completely removed with 7e9bd84883 (imx8m: ddrphy_utils: Remove unused
file)].

I assume this must have broken the imx8mm-cl-iot-gate board, at least
those that have not had their eeprom programmed with the proper
information. It certainly did break our out-of-tree board which always
reads back the ID register and uses that for a sanity check.

So apply the fix from 290ffe5788 once again.

Fixes: 99c7cc58e1 (ddr: imx: Add i.MX9 DDR controller driver)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-10-24 11:34:33 +02:00

477 lines
14 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018-2019 NXP
*/
#include <common.h>
#include <errno.h>
#include <log.h>
#include <asm/io.h>
#include <asm/arch/ddr.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
static unsigned int g_cdd_rr_max[4];
static unsigned int g_cdd_rw_max[4];
static unsigned int g_cdd_wr_max[4];
static unsigned int g_cdd_ww_max[4];
void ddr_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num)
{
int i = 0;
for (i = 0; i < num; i++) {
reg32_write(ddrc_cfg->reg, ddrc_cfg->val);
ddrc_cfg++;
}
}
#ifdef CONFIG_IMX8M_DRAM_INLINE_ECC
void ddrc_inline_ecc_scrub(unsigned int start_address,
unsigned int range_address)
{
unsigned int tmp;
/* Step1: Enable quasi-dynamic programming */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Step2: Set ECCCFG1.ecc_parity_region_lock to 1 */
reg32setbit(DDRC_ECCCFG1(0), 0x4);
/* Step3: Block the AXI ports from taking the transaction */
reg32_write(DDRC_PCTRL_0(0), 0x0);
/* Step4: Set scrub start address */
reg32_write(DDRC_SBRSTART0(0), start_address);
/* Step5: Set scrub range address */
reg32_write(DDRC_SBRRANGE0(0), range_address);
/* Step6: Set scrub_mode to write */
reg32_write(DDRC_SBRCTL(0), 0x00000014);
/* Step7: Set the desired pattern through SBRWDATA0 registers */
reg32_write(DDRC_SBRWDATA0(0), 0x55aa55aa);
/* Step8: Enable the SBR by programming SBRCTL.scrub_en=1 */
reg32setbit(DDRC_SBRCTL(0), 0x0);
/* Step9: Poll SBRSTAT.scrub_done=1 */
tmp = reg32_read(DDRC_SBRSTAT(0));
while (tmp != 0x00000002)
tmp = reg32_read(DDRC_SBRSTAT(0)) & 0x2;
/* Step10: Poll SBRSTAT.scrub_busy=0 */
tmp = reg32_read(DDRC_SBRSTAT(0));
while (tmp != 0x0)
tmp = reg32_read(DDRC_SBRSTAT(0)) & 0x1;
/* Step11: Disable SBR by programming SBRCTL.scrub_en=0 */
clrbits_le32(DDRC_SBRCTL(0), 0x1);
/* Step12: Prepare for normal scrub operation(Read) and set scrub_interval*/
reg32_write(DDRC_SBRCTL(0), 0x100);
/* Step13: Enable the SBR by programming SBRCTL.scrub_en=1 */
reg32_write(DDRC_SBRCTL(0), 0x101);
/* Step14: Enable AXI ports by programming */
reg32_write(DDRC_PCTRL_0(0), 0x1);
/* Step15: Disable quasi-dynamic programming */
reg32_write(DDRC_SWCTL(0), 0x00000001);
}
void ddrc_inline_ecc_scrub_end(unsigned int start_address,
unsigned int range_address)
{
/* Step1: Enable quasi-dynamic programming */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Step2: Block the AXI ports from taking the transaction */
reg32_write(DDRC_PCTRL_0(0), 0x0);
/* Step3: Set scrub start address */
reg32_write(DDRC_SBRSTART0(0), start_address);
/* Step4: Set scrub range address */
reg32_write(DDRC_SBRRANGE0(0), range_address);
/* Step5: Disable SBR by programming SBRCTL.scrub_en=0 */
clrbits_le32(DDRC_SBRCTL(0), 0x1);
/* Step6: Prepare for normal scrub operation(Read) and set scrub_interval */
reg32_write(DDRC_SBRCTL(0), 0x100);
/* Step7: Enable the SBR by programming SBRCTL.scrub_en=1 */
reg32_write(DDRC_SBRCTL(0), 0x101);
/* Step8: Enable AXI ports by programming */
reg32_write(DDRC_PCTRL_0(0), 0x1);
/* Step9: Disable quasi-dynamic programming */
reg32_write(DDRC_SWCTL(0), 0x00000001);
}
#endif
void __weak board_dram_ecc_scrub(void)
{
}
void lpddr4_mr_write(unsigned int mr_rank, unsigned int mr_addr,
unsigned int mr_data)
{
unsigned int tmp;
/*
* 1. Poll MRSTAT.mr_wr_busy until it is 0.
* This checks that there is no outstanding MR transaction.
* No writes should be performed to MRCTRL0 and MRCTRL1 if
* MRSTAT.mr_wr_busy = 1.
*/
do {
tmp = reg32_read(DDRC_MRSTAT(0));
} while (tmp & 0x1);
/*
* 2. Write the MRCTRL0.mr_type, MRCTRL0.mr_addr, MRCTRL0.mr_rank and
* (for MRWs) MRCTRL1.mr_data to define the MR transaction.
*/
reg32_write(DDRC_MRCTRL0(0), (mr_rank << 4));
reg32_write(DDRC_MRCTRL1(0), (mr_addr << 8) | mr_data);
reg32setbit(DDRC_MRCTRL0(0), 31);
}
unsigned int lpddr4_mr_read(unsigned int mr_rank, unsigned int mr_addr)
{
unsigned int tmp;
reg32_write(DRC_PERF_MON_MRR0_DAT(0), 0x1);
do {
tmp = reg32_read(DDRC_MRSTAT(0));
} while (tmp & 0x1);
reg32_write(DDRC_MRCTRL0(0), (mr_rank << 4) | 0x1);
reg32_write(DDRC_MRCTRL1(0), (mr_addr << 8));
reg32setbit(DDRC_MRCTRL0(0), 31);
do {
tmp = reg32_read(DRC_PERF_MON_MRR0_DAT(0));
} while ((tmp & 0x8) == 0);
tmp = reg32_read(DRC_PERF_MON_MRR1_DAT(0));
reg32_write(DRC_PERF_MON_MRR0_DAT(0), 0x4);
while (tmp) { //try to find a significant byte in the word
if (tmp & 0xff) {
tmp &= 0xff;
break;
}
tmp >>= 8;
}
return tmp;
}
static unsigned int look_for_max(unsigned int data[], unsigned int addr_start,
unsigned int addr_end)
{
unsigned int i, imax = 0;
for (i = addr_start; i <= addr_end; i++) {
if (((data[i] >> 7) == 0) && data[i] > imax)
imax = data[i];
}
return imax;
}
void get_trained_CDD(u32 fsp)
{
unsigned int i, ddr_type, tmp;
unsigned int cdd_cha[12], cdd_chb[12];
unsigned int cdd_cha_rr_max, cdd_cha_rw_max, cdd_cha_wr_max, cdd_cha_ww_max;
unsigned int cdd_chb_rr_max, cdd_chb_rw_max, cdd_chb_wr_max, cdd_chb_ww_max;
ddr_type = reg32_read(DDRC_MSTR(0)) & 0x3f;
if (ddr_type == 0x20) {
for (i = 0; i < 6; i++) {
tmp = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + (0x54013 + i) * 4);
cdd_cha[i * 2] = tmp & 0xff;
cdd_cha[i * 2 + 1] = (tmp >> 8) & 0xff;
}
for (i = 0; i < 7; i++) {
tmp = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + (0x5402c + i) * 4);
if (i == 0) {
cdd_cha[0] = (tmp >> 8) & 0xff;
} else if (i == 6) {
cdd_cha[11] = tmp & 0xff;
} else {
cdd_chb[i * 2 - 1] = tmp & 0xff;
cdd_chb[i * 2] = (tmp >> 8) & 0xff;
}
}
cdd_cha_rr_max = look_for_max(cdd_cha, 0, 1);
cdd_cha_rw_max = look_for_max(cdd_cha, 2, 5);
cdd_cha_wr_max = look_for_max(cdd_cha, 6, 9);
cdd_cha_ww_max = look_for_max(cdd_cha, 10, 11);
cdd_chb_rr_max = look_for_max(cdd_chb, 0, 1);
cdd_chb_rw_max = look_for_max(cdd_chb, 2, 5);
cdd_chb_wr_max = look_for_max(cdd_chb, 6, 9);
cdd_chb_ww_max = look_for_max(cdd_chb, 10, 11);
g_cdd_rr_max[fsp] =
cdd_cha_rr_max > cdd_chb_rr_max ? cdd_cha_rr_max : cdd_chb_rr_max;
g_cdd_rw_max[fsp] =
cdd_cha_rw_max > cdd_chb_rw_max ? cdd_cha_rw_max : cdd_chb_rw_max;
g_cdd_wr_max[fsp] =
cdd_cha_wr_max > cdd_chb_wr_max ? cdd_cha_wr_max : cdd_chb_wr_max;
g_cdd_ww_max[fsp] =
cdd_cha_ww_max > cdd_chb_ww_max ? cdd_cha_ww_max : cdd_chb_ww_max;
} else {
unsigned int ddr4_cdd[64];
for (i = 0; i < 29; i++) {
tmp = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + (0x54012 + i) * 4);
ddr4_cdd[i * 2] = tmp & 0xff;
ddr4_cdd[i * 2 + 1] = (tmp >> 8) & 0xff;
}
g_cdd_rr_max[fsp] = look_for_max(ddr4_cdd, 1, 12);
g_cdd_ww_max[fsp] = look_for_max(ddr4_cdd, 13, 24);
g_cdd_rw_max[fsp] = look_for_max(ddr4_cdd, 25, 40);
g_cdd_wr_max[fsp] = look_for_max(ddr4_cdd, 41, 56);
}
}
void update_umctl2_rank_space_setting(unsigned int pstat_num)
{
unsigned int i, ddr_type;
unsigned int addr_slot, rdata, tmp, tmp_t;
unsigned int ddrc_w2r, ddrc_r2w, ddrc_wr_gap, ddrc_rd_gap;
ddr_type = reg32_read(DDRC_MSTR(0)) & 0x3f;
for (i = 0; i < pstat_num; i++) {
addr_slot = i ? (i + 1) * 0x1000 : 0;
if (ddr_type == 0x20) {
/* update r2w:[13:8], w2r:[5:0] */
rdata = reg32_read(DDRC_DRAMTMG2(0) + addr_slot);
ddrc_w2r = rdata & 0x3f;
if (is_imx8mp())
tmp = ddrc_w2r + (g_cdd_wr_max[i] >> 1);
else
tmp = ddrc_w2r + (g_cdd_wr_max[i] >> 1) + 1;
ddrc_w2r = (tmp > 0x3f) ? 0x3f : tmp;
ddrc_r2w = (rdata >> 8) & 0x3f;
if (is_imx8mp())
tmp = ddrc_r2w + (g_cdd_rw_max[i] >> 1);
else
tmp = ddrc_r2w + (g_cdd_rw_max[i] >> 1) + 1;
ddrc_r2w = (tmp > 0x3f) ? 0x3f : tmp;
tmp_t = (rdata & 0xffffc0c0) | (ddrc_r2w << 8) | ddrc_w2r;
reg32_write((DDRC_DRAMTMG2(0) + addr_slot), tmp_t);
} else {
/* update w2r:[5:0] */
rdata = reg32_read(DDRC_DRAMTMG9(0) + addr_slot);
ddrc_w2r = rdata & 0x3f;
if (is_imx8mp())
tmp = ddrc_w2r + (g_cdd_wr_max[i] >> 1);
else
tmp = ddrc_w2r + (g_cdd_wr_max[i] >> 1) + 1;
ddrc_w2r = (tmp > 0x3f) ? 0x3f : tmp;
tmp_t = (rdata & 0xffffffc0) | ddrc_w2r;
reg32_write((DDRC_DRAMTMG9(0) + addr_slot), tmp_t);
/* update r2w:[13:8] */
rdata = reg32_read(DDRC_DRAMTMG2(0) + addr_slot);
ddrc_r2w = (rdata >> 8) & 0x3f;
if (is_imx8mp())
tmp = ddrc_r2w + (g_cdd_rw_max[i] >> 1);
else
tmp = ddrc_r2w + (g_cdd_rw_max[i] >> 1) + 1;
ddrc_r2w = (tmp > 0x3f) ? 0x3f : tmp;
tmp_t = (rdata & 0xffffc0ff) | (ddrc_r2w << 8);
reg32_write((DDRC_DRAMTMG2(0) + addr_slot), tmp_t);
}
if (!is_imx8mq()) {
/*
* update rankctl: wr_gap:11:8; rd:gap:7:4; quasi-dymic, doc wrong(static)
*/
rdata = reg32_read(DDRC_RANKCTL(0) + addr_slot);
ddrc_wr_gap = (rdata >> 8) & 0xf;
if (is_imx8mp())
tmp = ddrc_wr_gap + (g_cdd_ww_max[i] >> 1);
else
tmp = ddrc_wr_gap + (g_cdd_ww_max[i] >> 1) + 1;
ddrc_wr_gap = (tmp > 0xf) ? 0xf : tmp;
ddrc_rd_gap = (rdata >> 4) & 0xf;
if (is_imx8mp())
tmp = ddrc_rd_gap + (g_cdd_rr_max[i] >> 1);
else
tmp = ddrc_rd_gap + (g_cdd_rr_max[i] >> 1) + 1;
ddrc_rd_gap = (tmp > 0xf) ? 0xf : tmp;
tmp_t = (rdata & 0xfffff00f) | (ddrc_wr_gap << 8) | (ddrc_rd_gap << 4);
reg32_write((DDRC_RANKCTL(0) + addr_slot), tmp_t);
}
}
if (is_imx8mq()) {
/* update rankctl: wr_gap:11:8; rd:gap:7:4; quasi-dymic, doc wrong(static) */
rdata = reg32_read(DDRC_RANKCTL(0));
ddrc_wr_gap = (rdata >> 8) & 0xf;
tmp = ddrc_wr_gap + (g_cdd_ww_max[0] >> 1) + 1;
ddrc_wr_gap = (tmp > 0xf) ? 0xf : tmp;
ddrc_rd_gap = (rdata >> 4) & 0xf;
tmp = ddrc_rd_gap + (g_cdd_rr_max[0] >> 1) + 1;
ddrc_rd_gap = (tmp > 0xf) ? 0xf : tmp;
tmp_t = (rdata & 0xfffff00f) | (ddrc_wr_gap << 8) | (ddrc_rd_gap << 4);
reg32_write(DDRC_RANKCTL(0), tmp_t);
}
}
int ddr_init(struct dram_timing_info *dram_timing)
{
unsigned int tmp, initial_drate, target_freq;
int ret;
debug("DDRINFO: start DRAM init\n");
/* Step1: Follow the power up procedure */
if (is_imx8mq()) {
reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F00000F);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F000000);
} else {
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00001F);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
}
debug("DDRINFO: cfg clk\n");
/* change the clock source of dram_apb_clk_root: source 4 800MHz /4 = 200MHz */
clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(4) |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
/* disable iso */
reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
initial_drate = dram_timing->fsp_msg[0].drate;
/* default to the frequency point 0 clock */
ddrphy_init_set_dfi_clk(initial_drate);
/* D-aasert the presetn */
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);
/* Step2: Program the dwc_ddr_umctl2 registers */
debug("DDRINFO: ddrc config start\n");
ddr_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num);
debug("DDRINFO: ddrc config done\n");
/* Step3: De-assert reset signal(core_ddrc_rstn & aresetn_n) */
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000);
/*
* Step4: Disable auto-refreshes, self-refresh, powerdown, and
* assertion of dfi_dram_clk_disable by setting RFSHCTL3.dis_auto_refresh = 1,
* PWRCTL.powerdown_en = 0, and PWRCTL.selfref_en = 0, PWRCTL.en_dfi_dram_clk_disable = 0
*/
reg32_write(DDRC_DBG1(0), 0x00000000);
reg32_write(DDRC_RFSHCTL3(0), 0x0000001);
reg32_write(DDRC_PWRCTL(0), 0xa0);
/* if ddr type is LPDDR4, do it */
tmp = reg32_read(DDRC_MSTR(0));
if (tmp & (0x1 << 5) && !is_imx8mn())
reg32_write(DDRC_DDR_SS_GPR0, 0x01); /* LPDDR4 mode */
/* determine the initial boot frequency */
target_freq = reg32_read(DDRC_MSTR2(0)) & 0x3;
target_freq = (tmp & (0x1 << 29)) ? target_freq : 0x0;
/* Step5: Set SWCT.sw_done to 0 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Set the default boot frequency point */
clrsetbits_le32(DDRC_DFIMISC(0), (0x1f << 8), target_freq << 8);
/* Step6: Set DFIMISC.dfi_init_complete_en to 0 */
clrbits_le32(DDRC_DFIMISC(0), 0x1);
/* Step7: Set SWCTL.sw_done to 1; need to polling SWSTAT.sw_done_ack */
reg32_write(DDRC_SWCTL(0), 0x00000001);
do {
tmp = reg32_read(DDRC_SWSTAT(0));
} while ((tmp & 0x1) == 0x0);
/*
* Step8 ~ Step13: Start PHY initialization and training by
* accessing relevant PUB registers
*/
debug("DDRINFO:ddrphy config start\n");
ret = ddr_cfg_phy(dram_timing);
if (ret)
return ret;
debug("DDRINFO: ddrphy config done\n");
/*
* step14 CalBusy.0 =1, indicates the calibrator is actively
* calibrating. Wait Calibrating done.
*/
do {
tmp = reg32_read(DDRPHY_CalBusy(0));
} while ((tmp & 0x1));
debug("DDRINFO:ddrphy calibration done\n");
/* Step15: Set SWCTL.sw_done to 0 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Apply rank-to-rank workaround */
update_umctl2_rank_space_setting(dram_timing->fsp_msg_num - 1);
/* Step16: Set DFIMISC.dfi_init_start to 1 */
setbits_le32(DDRC_DFIMISC(0), (0x1 << 5));
/* Step17: Set SWCTL.sw_done to 1; need to polling SWSTAT.sw_done_ack */
reg32_write(DDRC_SWCTL(0), 0x00000001);
do {
tmp = reg32_read(DDRC_SWSTAT(0));
} while ((tmp & 0x1) == 0x0);
/* Step18: Polling DFISTAT.dfi_init_complete = 1 */
do {
tmp = reg32_read(DDRC_DFISTAT(0));
} while ((tmp & 0x1) == 0x0);
/* Step19: Set SWCTL.sw_done to 0 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Step20: Set DFIMISC.dfi_init_start to 0 */
clrbits_le32(DDRC_DFIMISC(0), (0x1 << 5));
/* Step21: optional */
/* Step22: Set DFIMISC.dfi_init_complete_en to 1 */
setbits_le32(DDRC_DFIMISC(0), 0x1);
/* Step23: Set PWRCTL.selfref_sw to 0 */
clrbits_le32(DDRC_PWRCTL(0), (0x1 << 5));
/* Step24: Set SWCTL.sw_done to 1; need polling SWSTAT.sw_done_ack */
reg32_write(DDRC_SWCTL(0), 0x00000001);
do {
tmp = reg32_read(DDRC_SWSTAT(0));
} while ((tmp & 0x1) == 0x0);
/* Step25: Wait for dwc_ddr_umctl2 to move to normal operating mode by monitoring
* STAT.operating_mode signal */
do {
tmp = reg32_read(DDRC_STAT(0));
} while ((tmp & 0x3) != 0x1);
/* Step26: Set back register in Step4 to the original values if desired */
reg32_write(DDRC_RFSHCTL3(0), 0x0000000);
/* enable port 0 */
reg32_write(DDRC_PCTRL_0(0), 0x00000001);
debug("DDRINFO: ddrmix config done\n");
board_dram_ecc_scrub();
/* enable selfref_en by default */
setbits_le32(DDRC_PWRCTL(0), 0x1);
/* save the dram timing config into memory */
dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
return 0;
}
ulong ddrphy_addr_remap(uint32_t paddr_apb_from_ctlr)
{
return 4 * paddr_apb_from_ctlr;
}
Reference in a new issue View git blame Copy permalink