mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 16:39:35 +00:00
aefb8f4c32
This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
74 lines
1.3 KiB
Text
74 lines
1.3 KiB
Text
if ARCH_MVEBU
|
|
|
|
config ARMADA_38X
|
|
bool
|
|
|
|
config ARMADA_XP
|
|
bool
|
|
|
|
config MV78230
|
|
bool
|
|
select ARMADA_XP
|
|
|
|
config MV78260
|
|
bool
|
|
select ARMADA_XP
|
|
|
|
config MV78460
|
|
bool
|
|
select ARMADA_XP
|
|
|
|
config DB_88F6820_GP
|
|
bool
|
|
select ARMADA_38X
|
|
|
|
choice
|
|
prompt "Marvell MVEBU (Armada XP/38x) board select"
|
|
optional
|
|
|
|
config TARGET_CLEARFOG
|
|
bool "Support ClearFog"
|
|
select DB_88F6820_GP
|
|
|
|
config TARGET_DB_88F6820_GP
|
|
bool "Support DB-88F6820-GP"
|
|
select DB_88F6820_GP
|
|
|
|
config TARGET_DB_MV784MP_GP
|
|
bool "Support db-mv784mp-gp"
|
|
select MV78460
|
|
|
|
config TARGET_DS414
|
|
bool "Support Synology DS414"
|
|
select MV78230
|
|
|
|
config TARGET_MAXBCM
|
|
bool "Support maxbcm"
|
|
select MV78460
|
|
|
|
endchoice
|
|
|
|
config SYS_BOARD
|
|
default "clearfog" if TARGET_CLEARFOG
|
|
default "db-88f6820-gp" if TARGET_DB_88F6820_GP
|
|
default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
|
|
default "ds414" if TARGET_DS414
|
|
default "maxbcm" if TARGET_MAXBCM
|
|
|
|
config SYS_CONFIG_NAME
|
|
default "clearfog" if TARGET_CLEARFOG
|
|
default "db-88f6820-gp" if TARGET_DB_88F6820_GP
|
|
default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
|
|
default "ds414" if TARGET_DS414
|
|
default "maxbcm" if TARGET_MAXBCM
|
|
|
|
config SYS_VENDOR
|
|
default "Marvell" if TARGET_DB_MV784MP_GP
|
|
default "Marvell" if TARGET_DB_88F6820_GP
|
|
default "solidrun" if TARGET_CLEARFOG
|
|
default "Synology" if TARGET_DS414
|
|
|
|
config SYS_SOC
|
|
default "mvebu"
|
|
|
|
endif
|