u-boot/drivers/mtd/nand/nand_plat.c
Mike Frysinger cd84423a09 mtd: nand: new base driver for memory mapped nand devices
The BF537-STAMP Blackfin board had a driver for working with NAND devices
that are simply memory mapped.  Since there is nothing Blackfin specific
about this, generalize the driver a bit so that everyone can leverage it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:04 -05:00

53 lines
1 KiB
C

/*
* Genericish driver for memory mapped NAND devices
*
* Copyright (c) 2006-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* Your board must implement the following macros:
* NAND_PLAT_WRITE_CMD(chip, cmd)
* NAND_PLAT_WRITE_ADR(chip, cmd)
* NAND_PLAT_INIT()
*
* It may also implement the following:
* NAND_PLAT_DEV_READY(chip)
*/
#include <common.h>
#include <asm/io.h>
#include <nand.h>
static void plat_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
NAND_PLAT_WRITE_CMD(this, cmd);
else
NAND_PLAT_WRITE_ADR(this, cmd);
}
#ifdef NAND_PLAT_DEV_READY
static int plat_dev_ready(struct mtd_info *mtd)
{
return NAND_PLAT_DEV_READY((struct nand_chip *)mtd->priv);
}
#else
# define plat_dev_ready NULL
#endif
int board_nand_init(struct nand_chip *nand)
{
NAND_PLAT_INIT();
nand->cmd_ctrl = plat_cmd_ctrl;
nand->dev_ready = plat_dev_ready;
nand->ecc.mode = NAND_ECC_SOFT;
return 0;
}