mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 05:23:34 +00:00
a821c4af79
These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
262 lines
6.2 KiB
C
262 lines
6.2 KiB
C
/*
|
|
* Clock drivers for Qualcomm APQ8016
|
|
*
|
|
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
|
|
*
|
|
* Based on Little Kernel driver, simplified
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitops.h>
|
|
|
|
/* GPLL0 clock control registers */
|
|
#define GPLL0_STATUS 0x2101C
|
|
#define GPLL0_STATUS_ACTIVE BIT(17)
|
|
|
|
#define APCS_GPLL_ENA_VOTE 0x45000
|
|
#define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0)
|
|
|
|
/* vote reg for blsp1 clock */
|
|
#define APCS_CLOCK_BRANCH_ENA_VOTE 0x45004
|
|
#define APCS_CLOCK_BRANCH_ENA_VOTE_BLSP1 BIT(10)
|
|
|
|
/* SDC(n) clock control registers; n=1,2 */
|
|
|
|
/* block control register */
|
|
#define SDCC_BCR(n) ((n * 0x1000) + 0x41000)
|
|
/* cmd */
|
|
#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004)
|
|
/* cfg */
|
|
#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008)
|
|
/* m */
|
|
#define SDCC_M(n) ((n * 0x1000) + 0x4100C)
|
|
/* n */
|
|
#define SDCC_N(n) ((n * 0x1000) + 0x41010)
|
|
/* d */
|
|
#define SDCC_D(n) ((n * 0x1000) + 0x41014)
|
|
/* branch control */
|
|
#define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018)
|
|
#define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C)
|
|
|
|
/* BLSP1 AHB clock (root clock for BLSP) */
|
|
#define BLSP1_AHB_CBCR 0x1008
|
|
|
|
/* Uart clock control registers */
|
|
#define BLSP1_UART2_BCR 0x3028
|
|
#define BLSP1_UART2_APPS_CBCR 0x302C
|
|
#define BLSP1_UART2_APPS_CMD_RCGR 0x3034
|
|
#define BLSP1_UART2_APPS_CFG_RCGR 0x3038
|
|
#define BLSP1_UART2_APPS_M 0x303C
|
|
#define BLSP1_UART2_APPS_N 0x3040
|
|
#define BLSP1_UART2_APPS_D 0x3044
|
|
|
|
/* CBCR register fields */
|
|
#define CBCR_BRANCH_ENABLE_BIT BIT(0)
|
|
#define CBCR_BRANCH_OFF_BIT BIT(31)
|
|
|
|
struct msm_clk_priv {
|
|
phys_addr_t base;
|
|
};
|
|
|
|
/* Enable clock controlled by CBC soft macro */
|
|
static void clk_enable_cbc(phys_addr_t cbcr)
|
|
{
|
|
setbits_le32(cbcr, CBCR_BRANCH_ENABLE_BIT);
|
|
|
|
while (readl(cbcr) & CBCR_BRANCH_OFF_BIT)
|
|
;
|
|
}
|
|
|
|
/* clock has 800MHz */
|
|
static void clk_enable_gpll0(phys_addr_t base)
|
|
{
|
|
if (readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE)
|
|
return; /* clock already enabled */
|
|
|
|
setbits_le32(base + APCS_GPLL_ENA_VOTE, APCS_GPLL_ENA_VOTE_GPLL0);
|
|
|
|
while ((readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE) == 0)
|
|
;
|
|
}
|
|
|
|
#define APPS_CMD_RGCR_UPDATE BIT(0)
|
|
|
|
/* Update clock command via CMD_RGCR */
|
|
static void clk_bcr_update(phys_addr_t apps_cmd_rgcr)
|
|
{
|
|
setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE);
|
|
|
|
/* Wait for frequency to be updated. */
|
|
while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE)
|
|
;
|
|
}
|
|
|
|
struct bcr_regs {
|
|
uintptr_t cfg_rcgr;
|
|
uintptr_t cmd_rcgr;
|
|
uintptr_t M;
|
|
uintptr_t N;
|
|
uintptr_t D;
|
|
};
|
|
|
|
/* RCGR_CFG register fields */
|
|
#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */
|
|
|
|
/* sources */
|
|
#define CFG_CLK_SRC_CXO (0 << 8)
|
|
#define CFG_CLK_SRC_GPLL0 (1 << 8)
|
|
#define CFG_CLK_SRC_MASK (7 << 8)
|
|
|
|
/* Mask for supported fields */
|
|
#define CFG_MASK 0x3FFF
|
|
|
|
#define CFG_DIVIDER_MASK 0x1F
|
|
|
|
/* root set rate for clocks with half integer and MND divider */
|
|
static void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
|
|
int div, int m, int n, int source)
|
|
{
|
|
uint32_t cfg;
|
|
/* M value for MND divider. */
|
|
uint32_t m_val = m;
|
|
/* NOT(N-M) value for MND divider. */
|
|
uint32_t n_val = ~((n)-(m)) * !!(n);
|
|
/* NOT 2D value for MND divider. */
|
|
uint32_t d_val = ~(n);
|
|
|
|
/* Program MND values */
|
|
writel(m_val, base + regs->M);
|
|
writel(n_val, base + regs->N);
|
|
writel(d_val, base + regs->D);
|
|
|
|
/* setup src select and divider */
|
|
cfg = readl(base + regs->cfg_rcgr);
|
|
cfg &= ~CFG_MASK;
|
|
cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
|
|
|
|
/* Set the divider; HW permits fraction dividers (+0.5), but
|
|
for simplicity, we will support integers only */
|
|
if (div)
|
|
cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
|
|
|
|
if (n_val)
|
|
cfg |= CFG_MODE_DUAL_EDGE;
|
|
|
|
writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
|
|
|
|
/* Inform h/w to start using the new config. */
|
|
clk_bcr_update(base + regs->cmd_rcgr);
|
|
}
|
|
|
|
static const struct bcr_regs sdc_regs[] = {
|
|
{
|
|
.cfg_rcgr = SDCC_CFG_RCGR(1),
|
|
.cmd_rcgr = SDCC_CMD_RCGR(1),
|
|
.M = SDCC_M(1),
|
|
.N = SDCC_N(1),
|
|
.D = SDCC_D(1),
|
|
},
|
|
{
|
|
.cfg_rcgr = SDCC_CFG_RCGR(2),
|
|
.cmd_rcgr = SDCC_CMD_RCGR(2),
|
|
.M = SDCC_M(2),
|
|
.N = SDCC_N(2),
|
|
.D = SDCC_D(2),
|
|
}
|
|
};
|
|
|
|
/* Init clock for SDHCI controller */
|
|
static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
|
|
{
|
|
int div = 8; /* 100MHz default */
|
|
|
|
if (rate == 200000000)
|
|
div = 4;
|
|
|
|
clk_enable_cbc(priv->base + SDCC_AHB_CBCR(slot));
|
|
/* 800Mhz/div, gpll0 */
|
|
clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0,
|
|
CFG_CLK_SRC_GPLL0);
|
|
clk_enable_gpll0(priv->base);
|
|
clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot));
|
|
|
|
return rate;
|
|
}
|
|
|
|
static const struct bcr_regs uart2_regs = {
|
|
.cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR,
|
|
.cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR,
|
|
.M = BLSP1_UART2_APPS_M,
|
|
.N = BLSP1_UART2_APPS_N,
|
|
.D = BLSP1_UART2_APPS_D,
|
|
};
|
|
|
|
/* Init UART clock, 115200 */
|
|
static int clk_init_uart(struct msm_clk_priv *priv)
|
|
{
|
|
/* Enable iface clk */
|
|
clk_enable_cbc(priv->base + BLSP1_AHB_CBCR);
|
|
/* 7372800 uart block clock @ GPLL0 */
|
|
clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625,
|
|
CFG_CLK_SRC_GPLL0);
|
|
clk_enable_gpll0(priv->base);
|
|
/* Enable core clk */
|
|
clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
ulong msm_set_rate(struct clk *clk, ulong rate)
|
|
{
|
|
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
|
|
|
|
switch (clk->id) {
|
|
case 0: /* SDC1 */
|
|
return clk_init_sdc(priv, 0, rate);
|
|
break;
|
|
case 1: /* SDC2 */
|
|
return clk_init_sdc(priv, 1, rate);
|
|
break;
|
|
case 4: /* UART2 */
|
|
return clk_init_uart(priv);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int msm_clk_probe(struct udevice *dev)
|
|
{
|
|
struct msm_clk_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->base = devfdt_get_addr(dev);
|
|
if (priv->base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clk_ops msm_clk_ops = {
|
|
.set_rate = msm_set_rate,
|
|
};
|
|
|
|
static const struct udevice_id msm_clk_ids[] = {
|
|
{ .compatible = "qcom,gcc-msm8916" },
|
|
{ .compatible = "qcom,gcc-apq8016" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(clk_msm) = {
|
|
.name = "clk_msm",
|
|
.id = UCLASS_CLK,
|
|
.of_match = msm_clk_ids,
|
|
.ops = &msm_clk_ops,
|
|
.priv_auto_alloc_size = sizeof(struct msm_clk_priv),
|
|
.probe = msm_clk_probe,
|
|
};
|