mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
8480792287
set_mode, set_seed functions has separate function pointers in dm_spi_ops, so use them in relevent one instead of calling from claim_bus. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
709 lines
18 KiB
C
709 lines
18 KiB
C
/*
|
|
* Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
|
|
* Christophe Ricard <christophe.ricard@gmail.com>
|
|
*
|
|
* Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
|
|
*
|
|
* Driver for McSPI controller on OMAP3. Based on davinci_spi.c
|
|
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* Copyright (C) 2007 Atmel Corporation
|
|
*
|
|
* Parts taken from linux/drivers/spi/omap2_mcspi.c
|
|
* Copyright (C) 2005, 2006 Nokia Corporation
|
|
*
|
|
* Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <spi.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX)
|
|
#define OMAP3_MCSPI1_BASE 0x48030100
|
|
#define OMAP3_MCSPI2_BASE 0x481A0100
|
|
#else
|
|
#define OMAP3_MCSPI1_BASE 0x48098000
|
|
#define OMAP3_MCSPI2_BASE 0x4809A000
|
|
#define OMAP3_MCSPI3_BASE 0x480B8000
|
|
#define OMAP3_MCSPI4_BASE 0x480BA000
|
|
#endif
|
|
|
|
#define OMAP4_MCSPI_REG_OFFSET 0x100
|
|
|
|
struct omap2_mcspi_platform_config {
|
|
unsigned int regs_offset;
|
|
};
|
|
|
|
/* per-register bitmasks */
|
|
#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
|
|
#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP BIT(2)
|
|
#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE BIT(0)
|
|
#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET BIT(1)
|
|
|
|
#define OMAP3_MCSPI_SYSSTATUS_RESETDONE BIT(0)
|
|
|
|
#define OMAP3_MCSPI_MODULCTRL_SINGLE BIT(0)
|
|
#define OMAP3_MCSPI_MODULCTRL_MS BIT(2)
|
|
#define OMAP3_MCSPI_MODULCTRL_STEST BIT(3)
|
|
|
|
#define OMAP3_MCSPI_CHCONF_PHA BIT(0)
|
|
#define OMAP3_MCSPI_CHCONF_POL BIT(1)
|
|
#define OMAP3_MCSPI_CHCONF_CLKD_MASK GENMASK(5, 2)
|
|
#define OMAP3_MCSPI_CHCONF_EPOL BIT(6)
|
|
#define OMAP3_MCSPI_CHCONF_WL_MASK GENMASK(11, 7)
|
|
#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY BIT(12)
|
|
#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY BIT(13)
|
|
#define OMAP3_MCSPI_CHCONF_TRM_MASK GENMASK(13, 12)
|
|
#define OMAP3_MCSPI_CHCONF_DMAW BIT(14)
|
|
#define OMAP3_MCSPI_CHCONF_DMAR BIT(15)
|
|
#define OMAP3_MCSPI_CHCONF_DPE0 BIT(16)
|
|
#define OMAP3_MCSPI_CHCONF_DPE1 BIT(17)
|
|
#define OMAP3_MCSPI_CHCONF_IS BIT(18)
|
|
#define OMAP3_MCSPI_CHCONF_TURBO BIT(19)
|
|
#define OMAP3_MCSPI_CHCONF_FORCE BIT(20)
|
|
|
|
#define OMAP3_MCSPI_CHSTAT_RXS BIT(0)
|
|
#define OMAP3_MCSPI_CHSTAT_TXS BIT(1)
|
|
#define OMAP3_MCSPI_CHSTAT_EOT BIT(2)
|
|
|
|
#define OMAP3_MCSPI_CHCTRL_EN BIT(0)
|
|
#define OMAP3_MCSPI_CHCTRL_DIS (0 << 0)
|
|
|
|
#define OMAP3_MCSPI_WAKEUPENABLE_WKEN BIT(0)
|
|
#define MCSPI_PINDIR_D0_IN_D1_OUT 0
|
|
#define MCSPI_PINDIR_D0_OUT_D1_IN 1
|
|
|
|
#define OMAP3_MCSPI_MAX_FREQ 48000000
|
|
#define SPI_WAIT_TIMEOUT 10
|
|
|
|
/* OMAP3 McSPI registers */
|
|
struct mcspi_channel {
|
|
unsigned int chconf; /* 0x2C, 0x40, 0x54, 0x68 */
|
|
unsigned int chstat; /* 0x30, 0x44, 0x58, 0x6C */
|
|
unsigned int chctrl; /* 0x34, 0x48, 0x5C, 0x70 */
|
|
unsigned int tx; /* 0x38, 0x4C, 0x60, 0x74 */
|
|
unsigned int rx; /* 0x3C, 0x50, 0x64, 0x78 */
|
|
};
|
|
|
|
struct mcspi {
|
|
unsigned char res1[0x10];
|
|
unsigned int sysconfig; /* 0x10 */
|
|
unsigned int sysstatus; /* 0x14 */
|
|
unsigned int irqstatus; /* 0x18 */
|
|
unsigned int irqenable; /* 0x1C */
|
|
unsigned int wakeupenable; /* 0x20 */
|
|
unsigned int syst; /* 0x24 */
|
|
unsigned int modulctrl; /* 0x28 */
|
|
struct mcspi_channel channel[4];
|
|
/* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
|
|
/* channel1: 0x40 - 0x50, bus 0 & 1 */
|
|
/* channel2: 0x54 - 0x64, bus 0 & 1 */
|
|
/* channel3: 0x68 - 0x78, bus 0 */
|
|
};
|
|
|
|
struct omap3_spi_priv {
|
|
#ifndef CONFIG_DM_SPI
|
|
struct spi_slave slave;
|
|
#endif
|
|
struct mcspi *regs;
|
|
unsigned int cs;
|
|
unsigned int freq;
|
|
unsigned int mode;
|
|
unsigned int wordlen;
|
|
unsigned int pin_dir:1;
|
|
};
|
|
|
|
static void omap3_spi_write_chconf(struct omap3_spi_priv *priv, int val)
|
|
{
|
|
writel(val, &priv->regs->channel[priv->cs].chconf);
|
|
/* Flash post writes to make immediate effect */
|
|
readl(&priv->regs->channel[priv->cs].chconf);
|
|
}
|
|
|
|
static void omap3_spi_set_enable(struct omap3_spi_priv *priv, int enable)
|
|
{
|
|
writel(enable, &priv->regs->channel[priv->cs].chctrl);
|
|
/* Flash post writes to make immediate effect */
|
|
readl(&priv->regs->channel[priv->cs].chctrl);
|
|
}
|
|
|
|
static int omap3_spi_write(struct omap3_spi_priv *priv, unsigned int len,
|
|
const void *txp, unsigned long flags)
|
|
{
|
|
ulong start;
|
|
int i, chconf;
|
|
|
|
chconf = readl(&priv->regs->channel[priv->cs].chconf);
|
|
|
|
/* Enable the channel */
|
|
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
|
|
|
|
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
|
|
chconf |= (priv->wordlen - 1) << 7;
|
|
chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
|
|
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(priv, chconf);
|
|
|
|
for (i = 0; i < len; i++) {
|
|
/* wait till TX register is empty (TXS == 1) */
|
|
start = get_timer(0);
|
|
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
|
|
OMAP3_MCSPI_CHSTAT_TXS)) {
|
|
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
|
|
printf("SPI TXS timed out, status=0x%08x\n",
|
|
readl(&priv->regs->channel[priv->cs].chstat));
|
|
return -1;
|
|
}
|
|
}
|
|
/* Write the data */
|
|
unsigned int *tx = &priv->regs->channel[priv->cs].tx;
|
|
if (priv->wordlen > 16)
|
|
writel(((u32 *)txp)[i], tx);
|
|
else if (priv->wordlen > 8)
|
|
writel(((u16 *)txp)[i], tx);
|
|
else
|
|
writel(((u8 *)txp)[i], tx);
|
|
}
|
|
|
|
/* wait to finish of transfer */
|
|
while ((readl(&priv->regs->channel[priv->cs].chstat) &
|
|
(OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS)) !=
|
|
(OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS))
|
|
;
|
|
|
|
/* Disable the channel otherwise the next immediate RX will get affected */
|
|
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
|
|
|
|
if (flags & SPI_XFER_END) {
|
|
|
|
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(priv, chconf);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int omap3_spi_read(struct omap3_spi_priv *priv, unsigned int len,
|
|
void *rxp, unsigned long flags)
|
|
{
|
|
int i, chconf;
|
|
ulong start;
|
|
|
|
chconf = readl(&priv->regs->channel[priv->cs].chconf);
|
|
|
|
/* Enable the channel */
|
|
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
|
|
|
|
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
|
|
chconf |= (priv->wordlen - 1) << 7;
|
|
chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
|
|
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(priv, chconf);
|
|
|
|
writel(0, &priv->regs->channel[priv->cs].tx);
|
|
|
|
for (i = 0; i < len; i++) {
|
|
start = get_timer(0);
|
|
/* Wait till RX register contains data (RXS == 1) */
|
|
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
|
|
OMAP3_MCSPI_CHSTAT_RXS)) {
|
|
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
|
|
printf("SPI RXS timed out, status=0x%08x\n",
|
|
readl(&priv->regs->channel[priv->cs].chstat));
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Disable the channel to prevent furher receiving */
|
|
if (i == (len - 1))
|
|
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
|
|
|
|
/* Read the data */
|
|
unsigned int *rx = &priv->regs->channel[priv->cs].rx;
|
|
if (priv->wordlen > 16)
|
|
((u32 *)rxp)[i] = readl(rx);
|
|
else if (priv->wordlen > 8)
|
|
((u16 *)rxp)[i] = (u16)readl(rx);
|
|
else
|
|
((u8 *)rxp)[i] = (u8)readl(rx);
|
|
}
|
|
|
|
if (flags & SPI_XFER_END) {
|
|
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(priv, chconf);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*McSPI Transmit Receive Mode*/
|
|
static int omap3_spi_txrx(struct omap3_spi_priv *priv, unsigned int len,
|
|
const void *txp, void *rxp, unsigned long flags)
|
|
{
|
|
ulong start;
|
|
int chconf, i = 0;
|
|
|
|
chconf = readl(&priv->regs->channel[priv->cs].chconf);
|
|
|
|
/*Enable SPI channel*/
|
|
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
|
|
|
|
/*set TRANSMIT-RECEIVE Mode*/
|
|
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
|
|
chconf |= (priv->wordlen - 1) << 7;
|
|
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(priv, chconf);
|
|
|
|
/*Shift in and out 1 byte at time*/
|
|
for (i=0; i < len; i++){
|
|
/* Write: wait for TX empty (TXS == 1)*/
|
|
start = get_timer(0);
|
|
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
|
|
OMAP3_MCSPI_CHSTAT_TXS)) {
|
|
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
|
|
printf("SPI TXS timed out, status=0x%08x\n",
|
|
readl(&priv->regs->channel[priv->cs].chstat));
|
|
return -1;
|
|
}
|
|
}
|
|
/* Write the data */
|
|
unsigned int *tx = &priv->regs->channel[priv->cs].tx;
|
|
if (priv->wordlen > 16)
|
|
writel(((u32 *)txp)[i], tx);
|
|
else if (priv->wordlen > 8)
|
|
writel(((u16 *)txp)[i], tx);
|
|
else
|
|
writel(((u8 *)txp)[i], tx);
|
|
|
|
/*Read: wait for RX containing data (RXS == 1)*/
|
|
start = get_timer(0);
|
|
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
|
|
OMAP3_MCSPI_CHSTAT_RXS)) {
|
|
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
|
|
printf("SPI RXS timed out, status=0x%08x\n",
|
|
readl(&priv->regs->channel[priv->cs].chstat));
|
|
return -1;
|
|
}
|
|
}
|
|
/* Read the data */
|
|
unsigned int *rx = &priv->regs->channel[priv->cs].rx;
|
|
if (priv->wordlen > 16)
|
|
((u32 *)rxp)[i] = readl(rx);
|
|
else if (priv->wordlen > 8)
|
|
((u16 *)rxp)[i] = (u16)readl(rx);
|
|
else
|
|
((u8 *)rxp)[i] = (u8)readl(rx);
|
|
}
|
|
/* Disable the channel */
|
|
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
|
|
|
|
/*if transfer must be terminated disable the channel*/
|
|
if (flags & SPI_XFER_END) {
|
|
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(priv, chconf);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _spi_xfer(struct omap3_spi_priv *priv, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
unsigned int len;
|
|
int ret = -1;
|
|
|
|
if (priv->wordlen < 4 || priv->wordlen > 32) {
|
|
printf("omap3_spi: invalid wordlen %d\n", priv->wordlen);
|
|
return -1;
|
|
}
|
|
|
|
if (bitlen % priv->wordlen)
|
|
return -1;
|
|
|
|
len = bitlen / priv->wordlen;
|
|
|
|
if (bitlen == 0) { /* only change CS */
|
|
int chconf = readl(&priv->regs->channel[priv->cs].chconf);
|
|
|
|
if (flags & SPI_XFER_BEGIN) {
|
|
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
|
|
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(priv, chconf);
|
|
}
|
|
if (flags & SPI_XFER_END) {
|
|
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(priv, chconf);
|
|
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
|
|
}
|
|
ret = 0;
|
|
} else {
|
|
if (dout != NULL && din != NULL)
|
|
ret = omap3_spi_txrx(priv, len, dout, din, flags);
|
|
else if (dout != NULL)
|
|
ret = omap3_spi_write(priv, len, dout, flags);
|
|
else if (din != NULL)
|
|
ret = omap3_spi_read(priv, len, din, flags);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void _omap3_spi_set_speed(struct omap3_spi_priv *priv)
|
|
{
|
|
uint32_t confr, div = 0;
|
|
|
|
confr = readl(&priv->regs->channel[priv->cs].chconf);
|
|
|
|
/* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
|
|
if (priv->freq) {
|
|
while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
|
|
> priv->freq)
|
|
div++;
|
|
} else {
|
|
div = 0xC;
|
|
}
|
|
|
|
/* set clock divisor */
|
|
confr &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
|
|
confr |= div << 2;
|
|
|
|
omap3_spi_write_chconf(priv, confr);
|
|
}
|
|
|
|
static void _omap3_spi_set_mode(struct omap3_spi_priv *priv)
|
|
{
|
|
uint32_t confr;
|
|
|
|
confr = readl(&priv->regs->channel[priv->cs].chconf);
|
|
|
|
/* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
|
|
* REVISIT: this controller could support SPI_3WIRE mode.
|
|
*/
|
|
if (priv->pin_dir == MCSPI_PINDIR_D0_IN_D1_OUT) {
|
|
confr &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
|
|
confr |= OMAP3_MCSPI_CHCONF_DPE0;
|
|
} else {
|
|
confr &= ~OMAP3_MCSPI_CHCONF_DPE0;
|
|
confr |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1;
|
|
}
|
|
|
|
/* set SPI mode 0..3 */
|
|
confr &= ~(OMAP3_MCSPI_CHCONF_POL | OMAP3_MCSPI_CHCONF_PHA);
|
|
if (priv->mode & SPI_CPHA)
|
|
confr |= OMAP3_MCSPI_CHCONF_PHA;
|
|
if (priv->mode & SPI_CPOL)
|
|
confr |= OMAP3_MCSPI_CHCONF_POL;
|
|
|
|
/* set chipselect polarity; manage with FORCE */
|
|
if (!(priv->mode & SPI_CS_HIGH))
|
|
confr |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
|
|
else
|
|
confr &= ~OMAP3_MCSPI_CHCONF_EPOL;
|
|
|
|
/* Transmit & receive mode */
|
|
confr &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
|
|
|
|
omap3_spi_write_chconf(priv, confr);
|
|
}
|
|
|
|
static void _omap3_spi_set_wordlen(struct omap3_spi_priv *priv)
|
|
{
|
|
unsigned int confr;
|
|
|
|
/* McSPI individual channel configuration */
|
|
confr = readl(&priv->regs->channel[priv->wordlen].chconf);
|
|
|
|
/* wordlength */
|
|
confr &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
|
|
confr |= (priv->wordlen - 1) << 7;
|
|
|
|
omap3_spi_write_chconf(priv, confr);
|
|
}
|
|
|
|
static void spi_reset(struct mcspi *regs)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, ®s->sysconfig);
|
|
do {
|
|
tmp = readl(®s->sysstatus);
|
|
} while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
|
|
|
|
writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
|
|
OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
|
|
OMAP3_MCSPI_SYSCONFIG_SMARTIDLE, ®s->sysconfig);
|
|
|
|
writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, ®s->wakeupenable);
|
|
}
|
|
|
|
static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv)
|
|
{
|
|
unsigned int conf;
|
|
|
|
spi_reset(priv->regs);
|
|
|
|
/*
|
|
* setup when switching from (reset default) slave mode
|
|
* to single-channel master mode
|
|
*/
|
|
conf = readl(&priv->regs->modulctrl);
|
|
conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
|
|
conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
|
|
|
|
writel(conf, &priv->regs->modulctrl);
|
|
}
|
|
|
|
#ifndef CONFIG_DM_SPI
|
|
|
|
static inline struct omap3_spi_priv *to_omap3_spi(struct spi_slave *slave)
|
|
{
|
|
return container_of(slave, struct omap3_spi_priv, slave);
|
|
}
|
|
|
|
void spi_init(void)
|
|
{
|
|
/* do nothing */
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct omap3_spi_priv *priv = to_omap3_spi(slave);
|
|
|
|
free(priv);
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
struct omap3_spi_priv *priv = to_omap3_spi(slave);
|
|
|
|
_omap3_spi_claim_bus(priv);
|
|
_omap3_spi_set_wordlen(priv);
|
|
_omap3_spi_set_mode(priv);
|
|
_omap3_spi_set_speed(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
struct omap3_spi_priv *priv = to_omap3_spi(slave);
|
|
|
|
/* Reset the SPI hardware */
|
|
spi_reset(priv->regs);
|
|
}
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct omap3_spi_priv *priv;
|
|
struct mcspi *regs;
|
|
|
|
/*
|
|
* OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
|
|
* with different number of chip selects (CS, channels):
|
|
* McSPI1 has 4 CS (bus 0, cs 0 - 3)
|
|
* McSPI2 has 2 CS (bus 1, cs 0 - 1)
|
|
* McSPI3 has 2 CS (bus 2, cs 0 - 1)
|
|
* McSPI4 has 1 CS (bus 3, cs 0)
|
|
*/
|
|
|
|
switch (bus) {
|
|
case 0:
|
|
regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
|
|
break;
|
|
#ifdef OMAP3_MCSPI2_BASE
|
|
case 1:
|
|
regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
|
|
break;
|
|
#endif
|
|
#ifdef OMAP3_MCSPI3_BASE
|
|
case 2:
|
|
regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
|
|
break;
|
|
#endif
|
|
#ifdef OMAP3_MCSPI4_BASE
|
|
case 3:
|
|
regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
|
|
break;
|
|
#endif
|
|
default:
|
|
printf("SPI error: unsupported bus %i. Supported busses 0 - 3\n", bus);
|
|
return NULL;
|
|
}
|
|
|
|
if (((bus == 0) && (cs > 3)) ||
|
|
((bus == 1) && (cs > 1)) ||
|
|
((bus == 2) && (cs > 1)) ||
|
|
((bus == 3) && (cs > 0))) {
|
|
printf("SPI error: unsupported chip select %i on bus %i\n", cs, bus);
|
|
return NULL;
|
|
}
|
|
|
|
if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
|
|
printf("SPI error: unsupported frequency %i Hz. Max frequency is 48 MHz\n",
|
|
max_hz);
|
|
return NULL;
|
|
}
|
|
|
|
if (mode > SPI_MODE_3) {
|
|
printf("SPI error: unsupported SPI mode %i\n", mode);
|
|
return NULL;
|
|
}
|
|
|
|
priv = spi_alloc_slave(struct omap3_spi_priv, bus, cs);
|
|
if (!priv) {
|
|
printf("SPI error: malloc of SPI structure failed\n");
|
|
return NULL;
|
|
}
|
|
|
|
priv->regs = regs;
|
|
priv->cs = cs;
|
|
priv->freq = max_hz;
|
|
priv->mode = mode;
|
|
priv->wordlen = priv->slave.wordlen;
|
|
#if 0
|
|
/* Please migrate to DM_SPI support for this feature. */
|
|
priv->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
|
|
#endif
|
|
|
|
return &priv->slave;
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct omap3_spi_priv *priv = to_omap3_spi(slave);
|
|
|
|
return _spi_xfer(priv, bitlen, dout, din, flags);
|
|
}
|
|
|
|
#else
|
|
|
|
static int omap3_spi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct omap3_spi_priv *priv = dev_get_priv(bus);
|
|
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
|
|
|
|
priv->cs = slave_plat->cs;
|
|
_omap3_spi_claim_bus(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap3_spi_release_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct omap3_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
/* Reset the SPI hardware */
|
|
spi_reset(priv->regs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap3_spi_set_wordlen(struct udevice *dev, unsigned int wordlen)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct omap3_spi_priv *priv = dev_get_priv(bus);
|
|
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
|
|
|
|
priv->cs = slave_plat->cs;
|
|
priv->wordlen = wordlen;
|
|
_omap3_spi_set_wordlen(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap3_spi_probe(struct udevice *dev)
|
|
{
|
|
struct omap3_spi_priv *priv = dev_get_priv(dev);
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
|
|
struct omap2_mcspi_platform_config* data =
|
|
(struct omap2_mcspi_platform_config*)dev_get_driver_data(dev);
|
|
|
|
priv->regs = (struct mcspi *)(devfdt_get_addr(dev) + data->regs_offset);
|
|
priv->pin_dir = fdtdec_get_uint(blob, node, "ti,pindir-d0-out-d1-in",
|
|
MCSPI_PINDIR_D0_IN_D1_OUT);
|
|
priv->wordlen = SPI_DEFAULT_WORDLEN;
|
|
return 0;
|
|
}
|
|
|
|
static int omap3_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct omap3_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
return _spi_xfer(priv, bitlen, dout, din, flags);
|
|
}
|
|
|
|
static int omap3_spi_set_speed(struct udevice *bus, unsigned int speed)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct omap3_spi_priv *priv = dev_get_priv(bus);
|
|
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
|
|
|
|
priv->cs = slave_plat->cs;
|
|
priv->freq = slave_plat->max_hz;
|
|
_omap3_spi_set_speed(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap3_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct omap3_spi_priv *priv = dev_get_priv(bus);
|
|
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
|
|
|
|
priv->cs = slave_plat->cs;
|
|
priv->mode = slave_plat->mode;
|
|
_omap3_spi_set_mode(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops omap3_spi_ops = {
|
|
.claim_bus = omap3_spi_claim_bus,
|
|
.release_bus = omap3_spi_release_bus,
|
|
.set_wordlen = omap3_spi_set_wordlen,
|
|
.xfer = omap3_spi_xfer,
|
|
.set_speed = omap3_spi_set_speed,
|
|
.set_mode = omap3_spi_set_mode,
|
|
/*
|
|
* cs_info is not needed, since we require all chip selects to be
|
|
* in the device tree explicitly
|
|
*/
|
|
};
|
|
|
|
static struct omap2_mcspi_platform_config omap2_pdata = {
|
|
.regs_offset = 0,
|
|
};
|
|
|
|
static struct omap2_mcspi_platform_config omap4_pdata = {
|
|
.regs_offset = OMAP4_MCSPI_REG_OFFSET,
|
|
};
|
|
|
|
static const struct udevice_id omap3_spi_ids[] = {
|
|
{ .compatible = "ti,omap2-mcspi", .data = (ulong)&omap2_pdata },
|
|
{ .compatible = "ti,omap4-mcspi", .data = (ulong)&omap4_pdata },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(omap3_spi) = {
|
|
.name = "omap3_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = omap3_spi_ids,
|
|
.probe = omap3_spi_probe,
|
|
.ops = &omap3_spi_ops,
|
|
.priv_auto_alloc_size = sizeof(struct omap3_spi_priv),
|
|
};
|
|
#endif
|