u-boot

mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-22 03:03:05 +00:00

History

Simon Glass 847fca6d47 imx: Use SATA instead of CMD_SATA This causes a build failure on mx6cuboxi with split config, since CMD_SATA shows up as enabled in SPl (because there is no SPL_CMD_SATA). The condition is wrong anyway, so change it to use SATA instead. Signed-off-by: Simon Glass <sjg@chromium.org>		2023-03-03 09:49:02 -05:00
..
Kconfig
MAINTAINERS	MAINTAINERS: Use my personal e-mail address	2021-04-08 20:29:53 +02:00
Makefile	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mx6cuboxi.c	imx: Use SATA instead of CMD_SATA	2023-03-03 09:49:02 -05:00
README	Use correct spelling of "U-Boot"	2016-02-06 12:00:59 +01:00

README

How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i
-----------------------------------------------------------

- Build U-Boot for Hummingboard/Cubox-i:

$ make mrproper
$ make mx6cuboxi_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.