u-boot/arch/nds32/include/asm/arch-ag101/ag101.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

88 lines
2.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Nobuhiro Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef __AG101_H
#define __AG101_H
/* Hardware register bases */
/* AHB Controller */
#define CONFIG_FTAHBC020S_BASE 0x90100000
/* Static Memory Controller (SRAM) */
#define CONFIG_FTSMC020_BASE 0x90200000
/* FTSDMC021 SDRAM Controller */
#define CONFIG_FTSDMC021_BASE 0x90300000
/* DMA Controller */
#define CONFIG_FTDMAC020_BASE 0x90400000
/* AHB-to-APB Bridge */
#define CONFIG_FTAPBBRG020S_01_BASE 0x90500000
/* LCD Controller */
#define CONFIG_FTLCDC100_BASE 0x90600000
/* Reserved */
#define CONFIG_RESERVED_01_BASE 0x90700000
/* Reserved */
#define CONFIG_RESERVED_02_BASE 0x90800000
/* Ethernet */
#define CONFIG_FTMAC100_BASE 0x90900000
/* External USB host */
#define CONFIG_EXT_USB_HOST_BASE 0x90A00000
/* USB Device */
#define CONFIG_USB_DEV_BASE 0x90B00000
/* External AHB-to-PCI Bridge (FTPCI100 not exist in ag101) */
#define CONFIG_EXT_AHBPCIBRG_BASE 0x90C00000
/* Reserved */
#define CONFIG_RESERVED_03_BASE 0x90D00000
/* External AHB-to-APB Bridger (FTAPBBRG020S_02) */
#define CONFIG_EXT_AHBAPBBRG_BASE 0x90E00000
/* External AHB slave1 (LCD) */
#define CONFIG_EXT_AHBSLAVE01_BASE 0x90F00000
/* External AHB slave2 (FUSBH200) */
#define CONFIG_EXT_AHBSLAVE02_BASE 0x92000000
/* DEBUG LED */
#define CONFIG_DEBUG_LED 0x902FFFFC
/* APB Device definitions */
/* Power Management Unit */
#define CONFIG_FTPMU010_BASE 0x98100000
/* BT UART 2/IrDA (UART 01 in Linux) */
#define CONFIG_FTUART010_01_BASE 0x98300000
/* Counter/Timers */
#define CONFIG_FTTMR010_BASE 0x98400000
/* Watchdog Timer */
#define CONFIG_FTWDT010_BASE 0x98500000
/* Real Time Clock */
#define CONFIG_FTRTC010_BASE 0x98600000
/* GPIO */
#define CONFIG_FTGPIO010_BASE 0x98700000
/* Interrupt Controller */
#define CONFIG_FTINTC010_BASE 0x98800000
/* I2C */
#define CONFIG_FTIIC010_BASE 0x98A00000
/* Reserved */
#define CONFIG_RESERVED_04_BASE 0x98C00000
/* Compat Flash Controller */
#define CONFIG_FTCFC010_BASE 0x98D00000
/* Synchronous Serial Port Controller (SSP) I2S/AC97 */
#define CONFIG_FTSSP010_02_BASE 0x99400000
/* ST UART ? SSP 02 (UART 02 in Linux) */
#define CONFIG_FTUART010_02_BASE 0x99600000
/* The following address was not defined in Linux */
/* FF UART 3 */
#define CONFIG_FTUART010_03_BASE 0x98200000
/* Synchronous Serial Port Controller (SSP) 01 */
#define CONFIG_FTSSP010_01_BASE 0x98B00000
/* IrDA */
#define CONFIG_IRDA_BASE 0x98900000
/* PWM - Pulse Width Modulator Controller */
#define CONFIG_PMW_BASE 0x99100000
#endif /* __AG101_H */