u-boot/board/freescale/ls1046ardb
Prabhakar Kushwaha 4ace304062 boards: ls1046ardb: disable unavailable "ethernet" node in dts
Linux device tree contains "ethernet" node for all possible
interface supported by SoC i.e. LS1046A.

It is not necessary for a SerDes protocol to support all possible
interface. So disable unavailable "ethernet" node in device tree.

Also, enable FDT_SEQ_MACADDR_FROM_ENV to fetch MAC address
sequentially from environment variables

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-24 12:42:50 -07:00
..
cpld.c ls1046ardb: cpld: add API for selecting core volt 2017-01-18 09:29:02 -08:00
cpld.h ls1046ardb: cpld: add API for selecting core volt 2017-01-18 09:29:02 -08:00
ddr.c common: freescale: Move arch-specific declarations 2017-06-05 12:30:55 -04:00
ddr.h armv8: ls1046ardb: Add LS1046ARDB board support 2016-09-14 14:11:00 -07:00
eth.c boards: ls1046ardb: disable unavailable "ethernet" node in dts 2017-12-24 12:42:50 -07:00
Kconfig armv8: LS1046ARDB: Add QSPI Secure Boot target 2017-04-17 09:03:30 -07:00
ls1046ardb.c fsl-lsch2: csu: remove multiple calling function 2017-08-09 09:57:32 -07:00
ls1046ardb_pbi.cfg armv8: ls1046ardb: Add LS1046ARDB board support 2016-09-14 14:11:00 -07:00
ls1046ardb_rcw_emmc.cfg armv8: ls1046ardb: update core frequency to 1800MHZ 2017-08-09 09:11:34 -07:00
ls1046ardb_rcw_sd.cfg armv8: ls1046ardb: update core frequency to 1800MHZ 2017-08-09 09:11:34 -07:00
MAINTAINERS arm: ls1046ardb: Add SD secure boot target 2017-04-17 09:03:30 -07:00
Makefile armv8: ls1046ardb: Make NET independent of FMan 2017-05-23 09:23:52 -07:00
README armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1046A 2017-05-23 09:51:28 -07:00

Overview
--------
The LS1046A Reference Design Board (RDB) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1046A
LayerScape Architecture processor. The LS1046ARDB provides SW development
platform for the Freescale LS1046A processor series, with a complete
debugging environment. The LS1046A RDB is lead-free and RoHS-compliant.

LS1046A SoC Overview
--------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
SoC overview.

 LS1046ARDB board Overview
 -----------------------
 - SERDES1 Connections, 4 lanes supporting:
      - Lane0: XFI with x1 RJ45 connector
      - Lane1: XFI Cage
      - Lane2: SGMII.5
      - Lane3: SGMII.6
 - SERDES2 Connections, 4 lanes supporting:
      - Lane0: PCIe1 with miniPCIe slot
      - Lane1: PCIe2 with PCIe x2 slot
      - Lane2: PCIe3 with PCIe x4 slot
      - Lane3: SATA
 - DDR Controller
     - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
 -IFC/Local Bus
    - One 512 MB NAND flash with ECC support
    - CPLD connection
 - USB 3.0
    - one Type A port, one Micro-AB port
 - SDHC: connects directly to a full SD/MMC slot
 - DSPI: 64 MB high-speed flash Memory for boot code and storage (up to 108MHz)
 - 4 I2C controllers
 - UART
   - Two 4-pin serial ports at up to 115.2 Kbit/s
   - Two DB9 D-Type connectors supporting one Serial port each
 - ARM JTAG support

Memory map from core's view
----------------------------
Start Address	 End Address	 Description		Size
0x00_0000_0000 - 0x00_000F_FFFF  Secure Boot ROM	1MB
0x00_0100_0000 - 0x00_0FFF_FFFF  CCSRBAR		240MB
0x00_1000_0000 - 0x00_1000_FFFF  OCRAM0 		64KB
0x00_1001_0000 - 0x00_1001_FFFF  OCRAM1 		64KB
0x00_2000_0000 - 0x00_20FF_FFFF  DCSR			16MB
0x00_7E80_0000 - 0x00_7E80_FFFF  IFC - NAND Flash	64KB
0x00_7FB0_0000 - 0x00_7FB0_0FFF  IFC - CPLD		4KB
0x00_8000_0000 - 0x00_FFFF_FFFF  DRAM1			2GB
0x05_0000_0000 - 0x05_07FF_FFFF  QMAN S/W Portal	128M
0x05_0800_0000 - 0x05_0FFF_FFFF  BMAN S/W Portal	128M
0x08_8000_0000 - 0x09_FFFF_FFFF  DRAM2			6GB
0x40_0000_0000 - 0x47_FFFF_FFFF  PCI Express1		32G
0x48_0000_0000 - 0x4F_FFFF_FFFF  PCI Express2		32G
0x50_0000_0000 - 0x57_FFFF_FFFF  PCI Express3		32G

QSPI flash map:
Start Address    End Address     Description		Size
0x00_4000_0000 - 0x00_400F_FFFF  RCW + PBI		1MB
0x00_4010_0000 - 0x00_402F_FFFF  U-Boot 		2MB
0x00_4030_0000 - 0x00_403F_FFFF  U-Boot Env		1MB
0x00_4040_0000 - 0x00_405F_FFFF  PPA			2MB
0x00_4060_0000 - 0x00_408F_FFFF  Secure boot header
				 + bootscript		3MB
0x00_4090_0000 - 0x00_4093_FFFF  FMan ucode		256KB
0x00_4094_0000 - 0x00_4097_FFFF  QE/uQE firmware	256KB
0x00_4098_0000 - 0x00_40FF_FFFF  Reserved		6MB
0x00_4100_0000 - 0x00_43FF_FFFF  FIT Image		48MB

Booting Options
---------------
a) QSPI boot
b) SD boot
c) eMMC boot