u-boot/include/configs/pcm052.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

223 lines
6.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Configuration settings for the phytec PCM-052 SoM.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/imx-regs.h>
#define CONFIG_SKIP_LOWLEVEL_INIT
/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
/* NAND support */
#define CONFIG_SYS_NAND_ONFI_DETECTION
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
#define CONFIG_JFFS2_NAND
/* Dynamic MTD partition support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#endif
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
/*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_FEC_MXC_PHYADDR 0
/* QSPI Configs*/
#ifdef CONFIG_FSL_QSPI
#define FSL_QSPI_FLASH_SIZE (1 << 24)
#define FSL_QSPI_FLASH_NUM 2
#define CONFIG_SYS_FSL_QSPI_LE
#endif
/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_SYS_I2C_MXC
/* RTC (actually an RV-4162 but M41T62-compatible) */
#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#define CONFIG_SYS_RTC_BUS_NUM 2
/* EEPROM (24FC256) */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_EEPROM_BUS 2
#define CONFIG_LOADADDR 0x82000000
/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_BOARD_SIZE_LIMIT 520192
/* if no target-specific extra environment settings were defined by the
target, define an empty one */
#ifndef PCM052_EXTRA_ENV_SETTINGS
#define PCM052_EXTRA_ENV_SETTINGS
#endif
/* if no target-specific boot command was defined by the target,
define an empty one */
#ifndef PCM052_BOOTCOMMAND
#define PCM052_BOOTCOMMAND
#endif
/* if no target-specific extra environment settings were defined by the
target, define an empty one */
#ifndef PCM052_NET_INIT
#define PCM052_NET_INIT
#endif
/* boot command, including the target-defined one if any */
#define CONFIG_BOOTCOMMAND PCM052_BOOTCOMMAND "run bootcmd_nand"
/* Extra env settings (including the target-defined ones if any) */
#define CONFIG_EXTRA_ENV_SETTINGS \
PCM052_EXTRA_ENV_SETTINGS \
"autoload=no\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"blimg_file=u-boot.vyb\0" \
"blimg_addr=0x81000000\0" \
"kernel_file=zImage\0" \
"kernel_addr=0x82000000\0" \
"fdt_file=zImage.dtb\0" \
"fdt_addr=0x81000000\0" \
"ram_file=uRamdisk\0" \
"ram_addr=0x83000000\0" \
"filesys=rootfs.ubifs\0" \
"sys_addr=0x81000000\0" \
"tftploc=/path/to/tftp/directory/\0" \
"nfs_root=/path/to/nfs/root\0" \
"tftptimeout=1000\0" \
"tftptimeoutcountmax=1000000\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"bootargs_base=setenv bootargs rw " \
" mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \
"console=ttyLP1,115200n8\0" \
"bootargs_sd=setenv bootargs ${bootargs} " \
"root=/dev/mmcblk0p2 rootwait\0" \
"bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \
"nfsroot=${serverip}:${nfs_root},v3,tcp\0" \
"bootargs_nand=setenv bootargs ${bootargs} " \
"ubi.mtd=5 rootfstype=ubifs root=ubi0:rootfs\0" \
"bootargs_ram=setenv bootargs ${bootargs} " \
"root=/dev/ram rw initrd=${ram_addr}\0" \
"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \
"fatload mmc 0:1 ${kernel_addr} ${kernel_file}; " \
"fatload mmc 0:1 ${fdt_addr} ${fdt_file}; " \
"bootz ${kernel_addr} - ${fdt_addr}\0" \
"bootcmd_net=run bootargs_base bootargs_net bootargs_mtd; " \
"tftpboot ${kernel_addr} ${tftpdir}${kernel_file}; " \
"tftpboot ${fdt_addr} ${tftpdir}${fdt_file}; " \
"bootz ${kernel_addr} - ${fdt_addr}\0" \
"bootcmd_nand=run bootargs_base bootargs_nand bootargs_mtd; " \
"nand read ${fdt_addr} dtb; " \
"nand read ${kernel_addr} kernel; " \
"bootz ${kernel_addr} - ${fdt_addr}\0" \
"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
"nand read ${fdt_addr} dtb; " \
"nand read ${kernel_addr} kernel; " \
"nand read ${ram_addr} root; " \
"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
"update_bootloader_from_tftp=" PCM052_NET_INIT \
"if tftp ${blimg_addr} "\
"${tftpdir}${blimg_file}; then " \
"mtdparts default; " \
"nand erase.part bootloader; " \
"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
"update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \
"${kernel_file}; " \
"then mtdparts default; " \
"nand erase.part kernel; " \
"nand write ${kernel_addr} kernel ${filesize}; " \
"if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \
"nand erase.part dtb; " \
"nand write ${fdt_addr} dtb ${filesize}; fi\0" \
"update_kernel_from_tftp=" PCM052_NET_INIT \
"if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
"then setenv fdtsize ${filesize}; " \
"if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \
"mtdparts default; " \
"nand erase.part dtb; " \
"nand write ${fdt_addr} dtb ${fdtsize}; " \
"nand erase.part kernel; " \
"nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \
"update_rootfs_from_tftp=" PCM052_NET_INIT \
"if tftp ${sys_addr} ${tftpdir}${filesys}; " \
"then mtdparts default; " \
"nand erase.part root; " \
"ubi part root; " \
"ubi create rootfs; " \
"ubi write ${sys_addr} rootfs ${filesize}; fi\0" \
"update_ramdisk_from_tftp=" PCM052_NET_INIT \
"if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
"then mtdparts default; " \
"nand erase.part root; " \
"nand write ${ram_addr} root ${filesize}; fi\0"
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80010000
#define CONFIG_SYS_MEMTEST_END 0x87C00000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)
#define PHYS_SDRAM_SIZE (CONFIG_PCM052_DDR_SIZE * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* environment organization */
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif
#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_ENV_OFFSET 0xA0000
#define CONFIG_ENV_SIZE_REDUND (8 * 1024)
#define CONFIG_ENV_OFFSET_REDUND 0xC0000
#endif
#endif