mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
123 lines
3.3 KiB
C
123 lines
3.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2015 Xilinx, Inc.
|
|
*
|
|
* Zynq USB HOST xHCI Controller
|
|
*
|
|
* Author: Siva Durga Prasad Paladugu<sivadur@xilinx.com>
|
|
*
|
|
* This file was reused from Freescale USB xHCI
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <usb.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/arch-zynqmp/hardware.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/usb/dwc3.h>
|
|
#include "xhci.h"
|
|
|
|
/* Declare global data pointer */
|
|
/* Default to the ZYNQMP XHCI defines */
|
|
#define USB3_PWRCTL_CLK_CMD_MASK 0x3FE000
|
|
#define USB3_PWRCTL_CLK_FREQ_MASK 0xFFC
|
|
#define USB3_PHY_PARTIAL_RX_POWERON BIT(6)
|
|
#define USB3_PHY_RX_POWERON BIT(14)
|
|
#define USB3_PHY_TX_POWERON BIT(15)
|
|
#define USB3_PHY_TX_RX_POWERON (USB3_PHY_RX_POWERON | USB3_PHY_TX_POWERON)
|
|
#define USB3_PWRCTL_CLK_CMD_SHIFT 14
|
|
#define USB3_PWRCTL_CLK_FREQ_SHIFT 22
|
|
|
|
/* USBOTGSS_WRAPPER definitions */
|
|
#define USBOTGSS_WRAPRESET BIT(17)
|
|
#define USBOTGSS_DMADISABLE BIT(16)
|
|
#define USBOTGSS_STANDBYMODE_NO_STANDBY BIT(4)
|
|
#define USBOTGSS_STANDBYMODE_SMRT BIT(5)
|
|
#define USBOTGSS_STANDBYMODE_SMRT_WKUP (0x3 << 4)
|
|
#define USBOTGSS_IDLEMODE_NOIDLE BIT(2)
|
|
#define USBOTGSS_IDLEMODE_SMRT BIT(3)
|
|
#define USBOTGSS_IDLEMODE_SMRT_WKUP (0x3 << 2)
|
|
|
|
/* USBOTGSS_IRQENABLE_SET_0 bit */
|
|
#define USBOTGSS_COREIRQ_EN BIT(1)
|
|
|
|
/* USBOTGSS_IRQENABLE_SET_1 bits */
|
|
#define USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN BIT(1)
|
|
#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN BIT(3)
|
|
#define USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN BIT(4)
|
|
#define USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN BIT(5)
|
|
#define USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN BIT(8)
|
|
#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN BIT(11)
|
|
#define USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN BIT(12)
|
|
#define USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN BIT(13)
|
|
#define USBOTGSS_IRQ_SET_1_OEVT_EN BIT(16)
|
|
#define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN BIT(17)
|
|
|
|
struct zynqmp_xhci {
|
|
struct xhci_hccr *hcd;
|
|
struct dwc3 *dwc3_reg;
|
|
};
|
|
|
|
static struct zynqmp_xhci zynqmp_xhci;
|
|
|
|
unsigned long ctr_addr[] = CONFIG_ZYNQMP_XHCI_LIST;
|
|
|
|
static int zynqmp_xhci_core_init(struct zynqmp_xhci *zynqmp_xhci)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = dwc3_core_init(zynqmp_xhci->dwc3_reg);
|
|
if (ret) {
|
|
debug("%s:failed to initialize core\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
/* We are hard-coding DWC3 core to Host Mode */
|
|
dwc3_set_mode(zynqmp_xhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
|
|
{
|
|
struct zynqmp_xhci *ctx = &zynqmp_xhci;
|
|
int ret = 0;
|
|
uint32_t hclen;
|
|
|
|
if (index < 0 || index >= ARRAY_SIZE(ctr_addr))
|
|
return -EINVAL;
|
|
|
|
ctx->hcd = (struct xhci_hccr *)ctr_addr[index];
|
|
ctx->dwc3_reg = (struct dwc3 *)((void *)ctx->hcd + DWC3_REG_OFFSET);
|
|
|
|
ret = board_usb_init(index, USB_INIT_HOST);
|
|
if (ret != 0) {
|
|
puts("Failed to initialize board for USB\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = zynqmp_xhci_core_init(ctx);
|
|
if (ret < 0) {
|
|
puts("Failed to initialize xhci\n");
|
|
return ret;
|
|
}
|
|
|
|
*hccr = (struct xhci_hccr *)ctx->hcd;
|
|
hclen = HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase));
|
|
*hcor = (struct xhci_hcor *)((uintptr_t) *hccr + hclen);
|
|
|
|
debug("zynqmp-xhci: init hccr %p and hcor %p hc_length %d\n",
|
|
*hccr, *hcor, hclen);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void xhci_hcd_stop(int index)
|
|
{
|
|
/*
|
|
* Currently zynqmp socs do not support PHY shutdown from
|
|
* sw. But this support may be added in future socs.
|
|
*/
|
|
|
|
return;
|
|
}
|