mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
170 lines
4.3 KiB
C
170 lines
4.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* board.c
|
|
*
|
|
* Board functions for B&R BRPPT1
|
|
*
|
|
* Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at>
|
|
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/gpio.h>
|
|
#include <i2c.h>
|
|
#include <power/tps65217.h>
|
|
#include "../common/bur_common.h"
|
|
#include <lcd.h>
|
|
#include <watchdog.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* --------------------------------------------------------------------------*/
|
|
/* -- defines for GPIO -- */
|
|
#define REPSWITCH (0+20) /* GPIO0_20 */
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
/* TODO: check ram-timing ! */
|
|
static const struct ddr_data ddr3_data = {
|
|
.datardsratio0 = MT41K256M16HA125E_RD_DQS,
|
|
.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
|
|
.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
|
|
.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
|
|
};
|
|
|
|
static const struct cmd_control ddr3_cmd_ctrl_data = {
|
|
.cmd0csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
|
|
.cmd1csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
|
|
.cmd2csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
};
|
|
|
|
static struct emif_regs ddr3_emif_reg_data = {
|
|
.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
|
|
.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
|
|
.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
|
|
.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
|
|
.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
|
|
.zq_config = MT41K256M16HA125E_ZQ_CFG,
|
|
.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
|
|
};
|
|
|
|
static const struct ctrl_ioregs ddr3_ioregs = {
|
|
.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
};
|
|
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
/*
|
|
* called from spl_nand.c
|
|
* return 0 for loading linux, return 1 for loading u-boot
|
|
*/
|
|
int spl_start_uboot(void)
|
|
{
|
|
if (0 == gpio_get_value(REPSWITCH)) {
|
|
mdelay(1000);
|
|
printf("SPL: entering u-boot instead kernel image.\n");
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SPL_OS_BOOT */
|
|
|
|
#define OSC (V_OSCK/1000000)
|
|
static const struct dpll_params dpll_ddr3 = { 400, OSC-1, 1, -1, -1, -1, -1};
|
|
|
|
void am33xx_spl_board_init(void)
|
|
{
|
|
struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
|
|
/*struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;*/
|
|
struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
|
|
|
|
/*
|
|
* in TRM they write a reset value of 1 (=CLK_M_OSC) for the
|
|
* CLKSEL_TIMER6_CLK Register, in fact reset value is 0, so we need set
|
|
* the source of timer6 clk to CLK_M_OSC
|
|
*/
|
|
writel(0x01, &cmdpll->clktimer6clk);
|
|
|
|
/* enable additional clocks of modules which are accessed later */
|
|
u32 *const clk_domains[] = {
|
|
&cmper->lcdcclkstctrl,
|
|
0
|
|
};
|
|
|
|
u32 *const clk_modules_tsspecific[] = {
|
|
&cmper->lcdclkctrl,
|
|
&cmper->timer5clkctrl,
|
|
&cmper->timer6clkctrl,
|
|
0
|
|
};
|
|
do_enable_clocks(clk_domains, clk_modules_tsspecific, 1);
|
|
|
|
/* setup I2C */
|
|
enable_i2c_pin_mux();
|
|
i2c_set_bus_num(0);
|
|
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
|
|
pmicsetup(0);
|
|
|
|
gpio_direction_output(64+29, 1); /* switch NAND_RnB to GPMC_WAIT1 */
|
|
gpio_direction_output(64+28, 1); /* switch MII2_CRS to GPMC_WAIT0 */
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_ddr_params(void)
|
|
{
|
|
return &dpll_ddr3;
|
|
}
|
|
|
|
void sdram_init(void)
|
|
{
|
|
config_ddr(400, &ddr3_ioregs,
|
|
&ddr3_data,
|
|
&ddr3_cmd_ctrl_data,
|
|
&ddr3_emif_reg_data, 0);
|
|
}
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
/* Basic board specific setup. Pinmux has been handled already. */
|
|
int board_init(void)
|
|
{
|
|
#if defined(CONFIG_HW_WATCHDOG)
|
|
hw_watchdog_init();
|
|
#endif
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
#ifdef CONFIG_NAND
|
|
gpmc_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
if (0 == gpio_get_value(REPSWITCH)) {
|
|
lcd_position_cursor(1, 8);
|
|
lcd_puts(
|
|
"switching to network-console ... ");
|
|
env_set("bootcmd", "run netconsole");
|
|
}
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_BOARD_LATE_INIT */
|