u-boot/arch/mips/mach-pic32/cpu.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

168 lines
2.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015
* Purna Chandra Mandal <purna.mandal@microchip.com>
*
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <mach/pic32.h>
#include <mach/ddr.h>
#include <dt-bindings/clock/microchip,clock.h>
/* Flash prefetch */
#define PRECON 0x00
/* Flash ECCCON */
#define ECC_MASK 0x03
#define ECC_SHIFT 4
#define CLK_MHZ(x) ((x) / 1000000)
DECLARE_GLOBAL_DATA_PTR;
static ulong rate(int id)
{
int ret;
struct udevice *dev;
struct clk clk;
ulong rate;
ret = uclass_get_device(UCLASS_CLK, 0, &dev);
if (ret) {
printf("clk-uclass not found\n");
return 0;
}
clk.id = id;
ret = clk_request(dev, &clk);
if (ret < 0)
return ret;
rate = clk_get_rate(&clk);
clk_free(&clk);
return rate;
}
static ulong clk_get_cpu_rate(void)
{
return rate(PB7CLK);
}
/* initialize prefetch module related to cpu_clk */
static void prefetch_init(void)
{
struct pic32_reg_atomic *regs;
const void __iomem *base;
int v, nr_waits;
ulong rate;
/* cpu frequency in MHZ */
rate = clk_get_cpu_rate() / 1000000;
/* get flash ECC type */
base = pic32_get_syscfg_base();
v = (readl(base + CFGCON) >> ECC_SHIFT) & ECC_MASK;
if (v < 2) {
if (rate < 66)
nr_waits = 0;
else if (rate < 133)
nr_waits = 1;
else
nr_waits = 2;
} else {
if (rate <= 83)
nr_waits = 0;
else if (rate <= 166)
nr_waits = 1;
else
nr_waits = 2;
}
regs = ioremap(PREFETCH_BASE + PRECON, sizeof(*regs));
writel(nr_waits, &regs->raw);
/* Enable prefetch for all */
writel(0x30, &regs->set);
iounmap(regs);
}
/* arch specific CPU init after DM */
int arch_cpu_init_dm(void)
{
/* flash prefetch */
prefetch_init();
return 0;
}
/* Un-gate DDR2 modules (gated by default) */
static void ddr2_pmd_ungate(void)
{
void __iomem *regs;
regs = pic32_get_syscfg_base();
writel(0, regs + PMD7);
}
/* initialize the DDR2 Controller and DDR2 PHY */
int dram_init(void)
{
ddr2_pmd_ungate();
ddr2_phy_init();
ddr2_ctrl_init();
gd->ram_size = ddr2_calculate_size();
return 0;
}
int misc_init_r(void)
{
set_io_port_base(0);
return 0;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
const char *get_core_name(void)
{
u32 proc_id;
const char *str;
proc_id = read_c0_prid();
switch (proc_id) {
case 0x19e28:
str = "PIC32MZ[DA]";
break;
default:
str = "UNKNOWN";
}
return str;
}
#endif
#ifdef CONFIG_CMD_CLK
int soc_clk_dump(void)
{
int i;
printf("PLL Speed: %lu MHz\n",
CLK_MHZ(rate(PLLCLK)));
printf("CPU Speed: %lu MHz\n", CLK_MHZ(rate(PB7CLK)));
printf("MPLL Speed: %lu MHz\n", CLK_MHZ(rate(MPLL)));
for (i = PB1CLK; i <= PB7CLK; i++)
printf("PB%d Clock Speed: %lu MHz\n", i - PB1CLK + 1,
CLK_MHZ(rate(i)));
for (i = REF1CLK; i <= REF5CLK; i++)
printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1,
CLK_MHZ(rate(i)));
return 0;
}
#endif