u-boot/arch/m68k/cpu/mcf52x2/cpu_init.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

737 lines
18 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2003
* Josef Baumgartner <josef.baumgartner@telex.de>
*
* MCF5282 additionals
* (C) Copyright 2005
* BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de>
* (c) Copyright 2010
* Arcturus Networks Inc. <www.arcturusnetworks.com>
*
* Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
* Hayden Fraser (Hayden.Fraser@freescale.com)
*
* MCF5275 additions
* Copyright (C) 2008 Arthur Shipkowski (art@videon-central.com)
*/
#include <common.h>
#include <watchdog.h>
#include <asm/immap.h>
#include <asm/io.h>
#if defined(CONFIG_CMD_NET)
#include <config.h>
#include <net.h>
#include <asm/fec.h>
#endif
#ifndef CONFIG_M5272
/* Only 5272 Flexbus chipselect is different from the rest */
void init_fbcs(void)
{
fbcs_t *fbcs = (fbcs_t *) (MMAP_FBCS);
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
&& defined(CONFIG_SYS_CS0_CTRL))
out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK);
#else
#warning "Chip Select 0 are not initialized/used"
#endif
#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
&& defined(CONFIG_SYS_CS1_CTRL))
out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE);
out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL);
out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK);
#endif
#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
&& defined(CONFIG_SYS_CS2_CTRL))
out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE);
out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL);
out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK);
#endif
#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
&& defined(CONFIG_SYS_CS3_CTRL))
out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE);
out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL);
out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK);
#endif
#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
&& defined(CONFIG_SYS_CS4_CTRL))
out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
#endif
#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
&& defined(CONFIG_SYS_CS5_CTRL))
out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
#endif
#if (defined(CONFIG_SYS_CS6_BASE) && defined(CONFIG_SYS_CS6_MASK) \
&& defined(CONFIG_SYS_CS6_CTRL))
out_be32(&fbcs->csar6, CONFIG_SYS_CS6_BASE);
out_be32(&fbcs->cscr6, CONFIG_SYS_CS6_CTRL);
out_be32(&fbcs->csmr6, CONFIG_SYS_CS6_MASK);
#endif
#if (defined(CONFIG_SYS_CS7_BASE) && defined(CONFIG_SYS_CS7_MASK) \
&& defined(CONFIG_SYS_CS7_CTRL))
out_be32(&fbcs->csar7, CONFIG_SYS_CS7_BASE);
out_be32(&fbcs->cscr7, CONFIG_SYS_CS7_CTRL);
out_be32(&fbcs->csmr7, CONFIG_SYS_CS7_MASK);
#endif
}
#endif
#if defined(CONFIG_M5208)
void cpu_init_f(void)
{
scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
#ifndef CONFIG_WATCHDOG
wdog_t *wdg = (wdog_t *) MMAP_WDOG;
/* Disable the watchdog if we aren't using it */
out_be16(&wdg->cr, 0);
#endif
out_be32(&scm1->mpr, 0x77777777);
out_be32(&scm1->pacra, 0);
out_be32(&scm1->pacrb, 0);
out_be32(&scm1->pacrc, 0);
out_be32(&scm1->pacrd, 0);
out_be32(&scm1->pacre, 0);
out_be32(&scm1->pacrf, 0);
/* FlexBus Chipselect */
init_fbcs();
icache_enable();
}
/* initialize higher level parts of CPU like timers */
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (port) {
case 0:
clrbits_be16(&gpio->par_uart, ~GPIO_PAR_UART0_UNMASK);
setbits_be16(&gpio->par_uart, GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
break;
case 1:
clrbits_be16(&gpio->par_uart, ~GPIO_PAR_UART0_UNMASK);
setbits_be16(&gpio->par_uart, GPIO_PAR_UART_U1TXD | GPIO_PAR_UART_U1RXD);
break;
case 2:
#ifdef CONFIG_SYS_UART2_PRI_GPIO
clrbits_8(&gpio->par_timer,
~(GPIO_PAR_TMR_TIN0_UNMASK | GPIO_PAR_TMR_TIN1_UNMASK));
setbits_8(&gpio->par_timer,
GPIO_PAR_TMR_TIN0_U2TXD | GPIO_PAR_TMR_TIN1_U2RXD);
#endif
#ifdef CONFIG_SYS_UART2_ALT1_GPIO
clrbits_8(&gpio->par_feci2c,
~(GPIO_PAR_FECI2C_MDC_UNMASK | GPIO_PAR_FECI2C_MDIO_UNMASK));
setbits_8(&gpio->par_feci2c,
GPIO_PAR_FECI2C_MDC_U2TXD | GPIO_PAR_FECI2C_MDIO_U2RXD);
#endif
#ifdef CONFIG_SYS_UART2_ALT1_GPIO
clrbits_8(&gpio->par_feci2c,
~(GPIO_PAR_FECI2C_SDA_UNMASK | GPIO_PAR_FECI2C_SCL_UNMASK));
setbits_8(&gpio->par_feci2c,
GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD);
#endif
break;
}
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(struct eth_device *dev, int setclear)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
if (setclear) {
setbits_8(&gpio->par_fec,
GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
setbits_8(&gpio->par_feci2c,
GPIO_PAR_FECI2C_MDC_MDC | GPIO_PAR_FECI2C_MDIO_MDIO);
} else {
clrbits_8(&gpio->par_fec,
~(GPIO_PAR_FEC_7W_UNMASK & GPIO_PAR_FEC_MII_UNMASK));
clrbits_8(&gpio->par_feci2c, ~GPIO_PAR_FECI2C_RMII_UNMASK);
}
return 0;
}
#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_M5208 */
#if defined(CONFIG_M5253)
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
mbar_writeByte(MCFSIM_MPARK, 0x40); /* 5249 Internal Core takes priority over DMA */
mbar_writeByte(MCFSIM_SYPCR, 0x00);
mbar_writeByte(MCFSIM_SWIVR, 0x0f);
mbar_writeByte(MCFSIM_SWSR, 0x00);
mbar_writeByte(MCFSIM_SWDICR, 0x00);
mbar_writeByte(MCFSIM_TIMER1ICR, 0x00);
mbar_writeByte(MCFSIM_TIMER2ICR, 0x88);
mbar_writeByte(MCFSIM_I2CICR, 0x00);
mbar_writeByte(MCFSIM_UART1ICR, 0x00);
mbar_writeByte(MCFSIM_UART2ICR, 0x00);
mbar_writeByte(MCFSIM_ICR6, 0x00);
mbar_writeByte(MCFSIM_ICR7, 0x00);
mbar_writeByte(MCFSIM_ICR8, 0x00);
mbar_writeByte(MCFSIM_ICR9, 0x00);
mbar_writeByte(MCFSIM_QSPIICR, 0x00);
mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080);
mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */
mbar2_writeByte(MCFSIM_SPURVEC, 0x00);
/*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); */ /* Enable a 1 cycle pre-drive cycle on CS1 */
/* FlexBus Chipselect */
init_fbcs();
#ifdef CONFIG_SYS_I2C_FSL
CONFIG_SYS_I2C_PINMUX_REG =
CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR;
CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
#ifdef CONFIG_SYS_I2C2_OFFSET
CONFIG_SYS_I2C2_PINMUX_REG &= CONFIG_SYS_I2C2_PINMUX_CLR;
CONFIG_SYS_I2C2_PINMUX_REG |= CONFIG_SYS_I2C2_PINMUX_SET;
#endif
#endif
/* enable instruction cache now */
icache_enable();
}
/*initialize higher level parts of CPU like timers */
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(int port)
{
u32 *par = (u32 *) MMAP_PAR;
/* Setup Ports: */
switch (port) {
case 1:
clrbits_be32(par, 0x00180000);
setbits_be32(par, 0x00180000);
break;
case 2:
clrbits_be32(par, 0x00000003);
clrbits_be32(par, 0xFFFFFFFC);
break;
}
}
#endif /* #if defined(CONFIG_M5253) */
#if defined(CONFIG_M5271)
void cpu_init_f(void)
{
#ifndef CONFIG_WATCHDOG
/* Disable the watchdog if we aren't using it */
mbar_writeShort(MCF_WTM_WCR, 0);
#endif
/* FlexBus Chipselect */
init_fbcs();
#ifdef CONFIG_SYS_MCF_SYNCR
/* Set clockspeed according to board header file */
mbar_writeLong(MCF_FMPLL_SYNCR, CONFIG_SYS_MCF_SYNCR);
#else
/* Set clockspeed to 100MHz */
mbar_writeLong(MCF_FMPLL_SYNCR,
MCF_FMPLL_SYNCR_MFD(0) | MCF_FMPLL_SYNCR_RFD(0));
#endif
while (!(mbar_readByte(MCF_FMPLL_SYNSR) & MCF_FMPLL_SYNSR_LOCK)) ;
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(int port)
{
u16 temp;
/* Setup Ports: */
switch (port) {
case 0:
temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xFFF3;
temp |= (MCF_GPIO_PAR_UART_U0TXD | MCF_GPIO_PAR_UART_U0RXD);
mbar_writeShort(MCF_GPIO_PAR_UART, temp);
break;
case 1:
temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xF0FF;
temp |= (MCF_GPIO_PAR_UART_U1RXD_UART1 | MCF_GPIO_PAR_UART_U1TXD_UART1);
mbar_writeShort(MCF_GPIO_PAR_UART, temp);
break;
case 2:
temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xCFFF;
temp |= (0x3000);
mbar_writeShort(MCF_GPIO_PAR_UART, temp);
break;
}
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(struct eth_device *dev, int setclear)
{
if (setclear) {
/* Enable Ethernet pins */
mbar_writeByte(MCF_GPIO_PAR_FECI2C,
(mbar_readByte(MCF_GPIO_PAR_FECI2C) | 0xF0));
} else {
}
return 0;
}
#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_M5271 */
#if defined(CONFIG_M5272)
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
/* if we come from RAM we assume the CPU is
* already initialized.
*/
#ifndef CONFIG_MONITOR_IS_IN_RAM
sysctrl_t *sysctrl = (sysctrl_t *) (CONFIG_SYS_MBAR);
gpio_t *gpio = (gpio_t *) (MMAP_GPIO);
csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS);
out_be16(&sysctrl->sc_scr, CONFIG_SYS_SCR);
out_be16(&sysctrl->sc_spr, CONFIG_SYS_SPR);
/* Setup Ports: */
out_be32(&gpio->gpio_pacnt, CONFIG_SYS_PACNT);
out_be16(&gpio->gpio_paddr, CONFIG_SYS_PADDR);
out_be16(&gpio->gpio_padat, CONFIG_SYS_PADAT);
out_be32(&gpio->gpio_pbcnt, CONFIG_SYS_PBCNT);
out_be16(&gpio->gpio_pbddr, CONFIG_SYS_PBDDR);
out_be16(&gpio->gpio_pbdat, CONFIG_SYS_PBDAT);
out_be32(&gpio->gpio_pdcnt, CONFIG_SYS_PDCNT);
/* Memory Controller: */
out_be32(&csctrl->cs_br0, CONFIG_SYS_BR0_PRELIM);
out_be32(&csctrl->cs_or0, CONFIG_SYS_OR0_PRELIM);
#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
out_be32(&csctrl->cs_br1, CONFIG_SYS_BR1_PRELIM);
out_be32(&csctrl->cs_or1, CONFIG_SYS_OR1_PRELIM);
#endif
#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
out_be32(&csctrl->cs_br2, CONFIG_SYS_BR2_PRELIM);
out_be32(&csctrl->cs_or2, CONFIG_SYS_OR2_PRELIM);
#endif
#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
out_be32(&csctrl->cs_br3, CONFIG_SYS_BR3_PRELIM);
out_be32(&csctrl->cs_or3, CONFIG_SYS_OR3_PRELIM);
#endif
#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
out_be32(&csctrl->cs_br4, CONFIG_SYS_BR4_PRELIM);
out_be32(&csctrl->cs_or4, CONFIG_SYS_OR4_PRELIM);
#endif
#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
out_be32(&csctrl->cs_br5, CONFIG_SYS_BR5_PRELIM);
out_be32(&csctrl->cs_or5, CONFIG_SYS_OR5_PRELIM);
#endif
#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
out_be32(&csctrl->cs_br6, CONFIG_SYS_BR6_PRELIM);
out_be32(&csctrl->cs_or6, CONFIG_SYS_OR6_PRELIM);
#endif
#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
out_be32(&csctrl->cs_br7, CONFIG_SYS_BR7_PRELIM);
out_be32(&csctrl->cs_or7, CONFIG_SYS_OR7_PRELIM);
#endif
#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */
/* enable instruction cache now */
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (port) {
case 0:
clrbits_be32(&gpio->gpio_pbcnt,
GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK);
setbits_be32(&gpio->gpio_pbcnt,
GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD);
break;
case 1:
clrbits_be32(&gpio->gpio_pdcnt,
GPIO_PDCNT_PD1MSK | GPIO_PDCNT_PD4MSK);
setbits_be32(&gpio->gpio_pdcnt,
GPIO_PDCNT_URT1_RXD | GPIO_PDCNT_URT1_TXD);
break;
}
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(struct eth_device *dev, int setclear)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
if (setclear) {
setbits_be32(&gpio->gpio_pbcnt,
GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER |
GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 |
GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 |
GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3);
} else {
}
return 0;
}
#endif /* CONFIG_CMD_NET */
#endif /* #if defined(CONFIG_M5272) */
#if defined(CONFIG_M5275)
/*
* Breathe some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
/*
* if we come from RAM we assume the CPU is
* already initialized.
*/
#ifndef CONFIG_MONITOR_IS_IN_RAM
wdog_t *wdog_reg = (wdog_t *) (MMAP_WDOG);
gpio_t *gpio_reg = (gpio_t *) (MMAP_GPIO);
/* Kill watchdog so we can initialize the PLL */
out_be16(&wdog_reg->wcr, 0);
/* FlexBus Chipselect */
init_fbcs();
#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */
#ifdef CONFIG_SYS_I2C_FSL
CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR;
CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
#endif
/* enable instruction cache now */
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (port) {
case 0:
clrbits_be16(&gpio->par_uart, UART0_ENABLE_MASK);
setbits_be16(&gpio->par_uart, UART0_ENABLE_MASK);
break;
case 1:
clrbits_be16(&gpio->par_uart, UART1_ENABLE_MASK);
setbits_be16(&gpio->par_uart, UART1_ENABLE_MASK);
break;
case 2:
clrbits_be16(&gpio->par_uart, UART2_ENABLE_MASK);
setbits_be16(&gpio->par_uart, UART2_ENABLE_MASK);
break;
}
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(struct eth_device *dev, int setclear)
{
struct fec_info_s *info = (struct fec_info_s *) dev->priv;
gpio_t *gpio = (gpio_t *)MMAP_GPIO;
if (setclear) {
/* Enable Ethernet pins */
if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
setbits_be16(&gpio->par_feci2c, 0x0f00);
setbits_8(&gpio->par_fec0hl, 0xc0);
} else {
setbits_be16(&gpio->par_feci2c, 0x00a0);
setbits_8(&gpio->par_fec1hl, 0xc0);
}
} else {
if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
clrbits_be16(&gpio->par_feci2c, 0x0f00);
clrbits_8(&gpio->par_fec0hl, 0xc0);
} else {
clrbits_be16(&gpio->par_feci2c, 0x00a0);
clrbits_8(&gpio->par_fec1hl, 0xc0);
}
}
return 0;
}
#endif /* CONFIG_CMD_NET */
#endif /* #if defined(CONFIG_M5275) */
#if defined(CONFIG_M5282)
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
#ifndef CONFIG_WATCHDOG
/* disable watchdog if we aren't using it */
MCFWTM_WCR = 0;
#endif
#ifndef CONFIG_MONITOR_IS_IN_RAM
/* Set speed /PLL */
MCFCLOCK_SYNCR =
MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) |
MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD);
while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ;
MCFGPIO_PBCDPAR = 0xc0;
/* Set up the GPIO ports */
#ifdef CONFIG_SYS_PEPAR
MCFGPIO_PEPAR = CONFIG_SYS_PEPAR;
#endif
#ifdef CONFIG_SYS_PFPAR
MCFGPIO_PFPAR = CONFIG_SYS_PFPAR;
#endif
#ifdef CONFIG_SYS_PJPAR
MCFGPIO_PJPAR = CONFIG_SYS_PJPAR;
#endif
#ifdef CONFIG_SYS_PSDPAR
MCFGPIO_PSDPAR = CONFIG_SYS_PSDPAR;
#endif
#ifdef CONFIG_SYS_PASPAR
MCFGPIO_PASPAR = CONFIG_SYS_PASPAR;
#endif
#ifdef CONFIG_SYS_PEHLPAR
MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
#endif
#ifdef CONFIG_SYS_PQSPAR
MCFGPIO_PQSPAR = CONFIG_SYS_PQSPAR;
#endif
#ifdef CONFIG_SYS_PTCPAR
MCFGPIO_PTCPAR = CONFIG_SYS_PTCPAR;
#endif
#if defined(CONFIG_SYS_PORTTC)
MCFGPIO_PORTTC = CONFIG_SYS_PORTTC;
#endif
#if defined(CONFIG_SYS_DDRTC)
MCFGPIO_DDRTC = CONFIG_SYS_DDRTC;
#endif
#ifdef CONFIG_SYS_PTDPAR
MCFGPIO_PTDPAR = CONFIG_SYS_PTDPAR;
#endif
#ifdef CONFIG_SYS_PUAPAR
MCFGPIO_PUAPAR = CONFIG_SYS_PUAPAR;
#endif
#if defined(CONFIG_SYS_DDRD)
MCFGPIO_DDRD = CONFIG_SYS_DDRD;
#endif
#ifdef CONFIG_SYS_DDRUA
MCFGPIO_DDRUA = CONFIG_SYS_DDRUA;
#endif
/* FlexBus Chipselect */
init_fbcs();
#endif /* CONFIG_MONITOR_IS_IN_RAM */
/* defer enabling cache until boot (see do_go) */
/* icache_enable(); */
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(int port)
{
/* Setup Ports: */
switch (port) {
case 0:
MCFGPIO_PUAPAR &= 0xFc;
MCFGPIO_PUAPAR |= 0x03;
break;
case 1:
MCFGPIO_PUAPAR &= 0xF3;
MCFGPIO_PUAPAR |= 0x0C;
break;
case 2:
MCFGPIO_PASPAR &= 0xFF0F;
MCFGPIO_PASPAR |= 0x00A0;
break;
}
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(struct eth_device *dev, int setclear)
{
if (setclear) {
MCFGPIO_PASPAR |= 0x0F00;
MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
} else {
MCFGPIO_PASPAR &= 0xF0FF;
MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR;
}
return 0;
}
#endif /* CONFIG_CMD_NET */
#endif
#if defined(CONFIG_M5249)
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
/*
* NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins
* (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins
* which is their primary function.
* ~Jeremy
*/
mbar2_writeLong(MCFSIM_GPIO_FUNC, CONFIG_SYS_GPIO_FUNC);
mbar2_writeLong(MCFSIM_GPIO1_FUNC, CONFIG_SYS_GPIO1_FUNC);
mbar2_writeLong(MCFSIM_GPIO_EN, CONFIG_SYS_GPIO_EN);
mbar2_writeLong(MCFSIM_GPIO1_EN, CONFIG_SYS_GPIO1_EN);
mbar2_writeLong(MCFSIM_GPIO_OUT, CONFIG_SYS_GPIO_OUT);
mbar2_writeLong(MCFSIM_GPIO1_OUT, CONFIG_SYS_GPIO1_OUT);
/*
* dBug Compliance:
* You can verify these values by using dBug's 'ird'
* (Internal Register Display) command
* ~Jeremy
*
*/
mbar_writeByte(MCFSIM_MPARK, 0x30); /* 5249 Internal Core takes priority over DMA */
mbar_writeByte(MCFSIM_SYPCR, 0x00);
mbar_writeByte(MCFSIM_SWIVR, 0x0f);
mbar_writeByte(MCFSIM_SWSR, 0x00);
mbar_writeLong(MCFSIM_IMR, 0xfffffbff);
mbar_writeByte(MCFSIM_SWDICR, 0x00);
mbar_writeByte(MCFSIM_TIMER1ICR, 0x00);
mbar_writeByte(MCFSIM_TIMER2ICR, 0x88);
mbar_writeByte(MCFSIM_I2CICR, 0x00);
mbar_writeByte(MCFSIM_UART1ICR, 0x00);
mbar_writeByte(MCFSIM_UART2ICR, 0x00);
mbar_writeByte(MCFSIM_ICR6, 0x00);
mbar_writeByte(MCFSIM_ICR7, 0x00);
mbar_writeByte(MCFSIM_ICR8, 0x00);
mbar_writeByte(MCFSIM_ICR9, 0x00);
mbar_writeByte(MCFSIM_QSPIICR, 0x00);
mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080);
mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */
mbar2_writeByte(MCFSIM_SPURVEC, 0x00);
mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); /* Enable a 1 cycle pre-drive cycle on CS1 */
/* Setup interrupt priorities for gpio7 */
/* mbar2_writeLong(MCFSIM_INTLEV5, 0x70000000); */
/* IDE Config registers */
mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020);
mbar2_writeLong(MCFSIM_IDECONFIG2, 0x00000000);
/* FlexBus Chipselect */
init_fbcs();
/* enable instruction cache now */
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(int port)
{
}
#endif /* #if defined(CONFIG_M5249) */